For ease of use and strong bond. Fits 1-1/4 in strapping. Requires strapping tool.

High strength steel buckle with rust-resistant hot dipped galvanized finish. Secures strap around mobile home frame.

Designed to hold strap or cable ties away from the roof and sides of mobile homes. Made of hot dipped galvanized steel for maximum strength and corrosion protection. Certified to ANSI A1191.

For anchoring situations such as storage sheds and guying applications. Designed for easy installation with cables.

For anchoring situations such as storage sheds and guying applications. Designed for easy installation with cables.

Required for the tensioning of frame or roof ties with all tension head anchors.

Engineered for installation in hard density soil. 3/4 in rod, twin 4 in helix.

Conforms to NCSBCS A225.1 (ANSI A119.1) and HUD specifications for mobile home applications. Minimum tensile strength of 5000 lb. 1-1/4 in W.

For anchoring situations such as storage sheds and guying applications. Designed for easy installation with cables.

Engineered for installation in light density soils. 5/8 in rod, 6 in helix.

Engineered for installation in light density soils. 5/8 in rod, 6 in helix.

Provides do-it-yourself protection for most outdoor structures or possessions. Aids in the prevention of theft and high wind damage. May be used to anchor trees, fences, carports, antennas, boats, tents, airplanes, awnings and playground equipment. Includes four 15 in eye anchors with 4 in helix and 50 ft x 3/32 in stranded wire. Boxed.

A necessity for wind protection. Provides do-it-yourself protection for any storage building. May be used to anchor fences, tents, trees, boats, carports, antennas, airplanes, pool covers and playground equipment. Includes 30 in eye anchors with 4 in helix, 4-1/8 in galvanized clamps and 60-1/8 in galvanized aircraft cable. Boxed.

Prevents anchor from slicing through soil laterally in the direction of the frame tie. Black paint. Boxed.

For fast and safe installation of frame ties, heavy-duty 1/4 in steel hook locks securely onto frame. Certified galvanized steel strapping conforms to NCS BCS A225.1 (ANSI A119.3) and HUD specifications.

Frame tie with buckle for fast and easy installation with tie-down manufactured home anchors and slotted bolt.

Designed to be bolted to an expansion sleeve in an existing concrete slab or footing with only a 5/8 in drilled hole for expansion anchor bolt. Concrete must be 2500 psi minimum slab with 4 in minimum thickness and 6/6 x 10/10 wire mesh or fiber mesh installed. Concrete slab must allow 4725 lb of vertical tension on anchor without lifting. This assumes that the concrete weighs 150 lb/cu-ft. Minimum distance from the anchor shaft to one edge of the slab is 4 in from one edge and 6 in from any other edge. Black color.