Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.

Green round washer head screw for switch and outlet boxes.

Connects grounding wire to the grounding rod. UL and CSA listed for 1/2 in and 5/8 in ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.

Connects grounding wire to the grounding rod.

Bolted water pipe clamps made of zinc die-cast. Wire range 8 solid to 2 stranded. UL listed. Connects grounding wire to the grounding rod.

GB offers a convenient grounding accessories line of products suitable for most job requirements. This grounding pig tail is made from #12 AWG stranded wire. One end is terminated with a bare fork terminal. The other end is a captured screw.

Connects grounding wire to the grounding rod.

Convenient grounding accessories include products suitable for most job requirements.

Connects grounding wire to the grounding rod.

Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.

Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy.

Cutler-Hammer Ground Bar Kit, 10 Terminals, 4.7 in Length, 2.3 in Width, 1/2 in Height

Eaton Ground Bar Kit, Number of Terminals: 14, Wire Size: 14 to 4 AWG, 5.69 in L

Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.

Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.

For equipment grounding provision. #14 to 4 AWG, 60/75 deg Celsius, Cu/A1.

Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color.

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.

Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2 in (12.7 mm) to 1 in (25.4 mm). Conductor range from #10 (5.5 sq-mm) to #2 (25 sq-mm). UL listed.

Wire size fits #10 to 2 AWG. Use to secure the grounding wire to a 1-1/4 to 2 in or 2-1/2 to 4 in pipe. Bronze. UL listed.

Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel.

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.

For equipment grounding provision. #14 to 4 AWG, 60/75 deg Celsius, Cu/A1.

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.

Use when compression couplers are required around ground rod splices. Enable ground rods to be driven deep quickly and easily without the risk of rod separation. Manufactured of high-strength silicon bronze. Coupling is tapered, so when the rod is driven into the coupling the two parts compress to form a conductive connection.

Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts one #14 - #4 copper wire or one #12 - #4 aluminum wire, two #14 - #12 copper wire or two #12 - #10 aluminum wire. ANSI certified and UL listed.

Copper bonded, resists corrosion better than galvanized rods, allowing for a 30 year service life in most soils. Uniform plating thickness, average tensile strength of 80000 psi and straightness tolerance of 0.010 in per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA and ANSI/NEMA GR-1.

Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid to 2 stranded. UL listed.