The raintight NEMA 3R power inlet box is designed for the use with the Pro/Tran transfer switches and Reliance? panel or link manual transfer panels and generator-ready load centers. The power inlet box may be installed indoors or outdoors in an open area where the generator is being used. Using one of the four combination 1/2 in and 3/4 in knockouts (one on each side, bottom and back) the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in. The PR Series includes circuit breakers that match the amperage of the power inlet. UL listed. The raintight NEMA 3R PBN Series non-metallic power inlet box is designed for use with the Pro/Tran transfer switches and panel or link manual transfer panels and generator-ready load centers. This power inlet box must be installed outdoors in an open area where the generator is being used. Using one of the three 3/4 in knockouts (one each on the sides and back) the power inlet box can be wired directly to the transfer switch or panel. The patented design provides over 100 cu-in of wiring space and the slide-out base allows easy 360 deg access to the flanged inlet.

The raintight NEMA 3R power inlet box is designed for the use with the Pro/Tran transfer switches and Reliance? panel or link manual transfer panels and generator-ready load centers. The power inlet box may be installed indoors or outdoors in an open area where the generator is being used. Using one of the four combination 1/2 in and 3/4 in knockouts (one on each side, bottom and back) the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in. The PR Series includes circuit breakers that match the amperage of the power inlet. UL listed. The raintight NEMA 3R PBN Series non-metallic power inlet box is designed for use with the Pro/Tran transfer switches and panel or link manual transfer panels and generator-ready load centers. This power inlet box must be installed outdoors in an open area where the generator is being used. Using one of the three 3/4 in knockouts (one each on the sides and back) the power inlet box can be wired directly to the transfer switch or panel. The patented design provides over 100 cu-in of wiring space and the slide-out base allows easy 360 deg access to the flanged inlet.

The raintight NEMA 3R power inlet box is designed for the use with the Pro/Tran transfer switches and Reliance? panel or link manual transfer panels and generator-ready load centers. The power inlet box may be installed indoors or outdoors in an open area where the generator is being used. Using one of the four combination 1/2 in and 3/4 in knockouts (one on each side, bottom and back) the power inlet box can be wired directly to the transfer switch or panel. The exclusive patented design provides generous wiring space and facilitates rough-in. The PR Series includes circuit breakers that match the amperage of the power inlet. UL listed. The raintight NEMA 3R PBN Series non-metallic power inlet box is designed for use with the Pro/Tran transfer switches and panel or link manual transfer panels and generator-ready load centers. This power inlet box must be installed outdoors in an open area where the generator is being used. Using one of the three 3/4 in knockouts (one each on the sides and back) the power inlet box can be wired directly to the transfer switch or panel. The patented design provides over 100 cu-in of wiring space and the slide-out base allows easy 360 deg access to the flanged inlet.

The Easy/Tran TF transfer switch is designed for the control of a single circuit, such as a forced-air furnace, in the event of a power failure. The attached 18 in flexible aluminum conduit is pre-wired and allows the TF to be easily connected at the circuit breaker panel or the furnace or at any point in between. Power can be supplied from a portable generator, inverter, RV generator, fuel cell or any standby source capable of producing sufficient current to operate the desired load. Uses standard grounded extension cord.

These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18 in flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.

These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 18 in flexible conduit whip attaches easily to the load center and all wires are clearly marked. Simply select the circuits needed in an emergency and connect them to the Pro/Tran wire leads.

The Pro/Tran 2 is the next generation of Loadside? manual transfer switch by Reliance Controls. These indoor surface mount transfer switches are designed for fast installation in residential and commercial applications. The 16 in flexible conduit whip attaches easily to a knockout on the load center and all factory wires are clearly marked and colored for identification. Simply select the circuits needed in an emergency and connect them to the Pro/Tran two wire leads as instructed in the manual.