Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included).

Die-cast aluminum with rectangular zinc cover and box, for wet locations. Gaskets, screws, mounting lugs and closure plugs included. Par-38 lamps, 75-150 watt maximum, not included. UL Listed.

Designed for sloped ceiling installations for ceilings from 2/12 to 12/12 pitch. The socket mechanism allows the lamp to be aimed straight down regardless of ceiling pitch. Lamp socket and trim can be adjusted 20 degrees laterally for compound slope ceilings or to compensate for off axis aiming. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Plaster frame includes locking screw for hanger bars and cut outs for crimping hanger bars into position. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-3/8" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-1/4"  thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.

Rotary lampholder On/Off switch. Uses 60-watt maximum A-19 bulb (not included). Adjustable 13" overall height. Bullet style metal shade. cULus Listed.

Uses clear medium base bulbs 60 watt maximum (not included). 22-1/2" wide x 18-7/8" high. cULus Listed.

Rotary lampholder, on/off switch. Uses 60 watt maximum A-19 bulb (not included). Adjustable 26" overall height. Metal shade. cULus Listed.

Single light kits compatible with any  2-1/4" fitter glass shade (sold separately). Uses shade rings instead of thumb screws to secure the glass, to quickly and easily update the look of the fixture. Includes installation hardware and an adjustable 50" cord. Uses one 60 watt standard base light bulb (not included).

With integral 12 volt electronic transformer. Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Front loading lamp design. 12 volt MR16, 50 watts maximum. For accent and display lighting applications. 2-1/8" width x 2" depth, maximum extension of 4-7/8".

For outdoor use only. Easy installation, no wiring needed, mounts almost anywhere. Provides light in remote areas. Solar panel uses sunlight to charge a rechargeable battery pack (included)during the day. Fixture motion sensor turns the light ON with motion at night. Adjustable time setting for 1 to 3 minutes. Photocell only allows the fixture to turn on at night. 180 degree coverage, up to 70'. LED light bulb. Includes light fixture, 6" x 8" solar panel for maximum charging power, with 16' cord. cULus Listed for wet location use.

Clear beveled glass panels. Uses a medium base bulb, 60 watt maximum, (not included). Will not rust or tarnish. 8-5/8" height x 4-3/8" width x 6-1/8" extension. cULus Listed.

Lampholder On/Off switch. Uses 60-watt maximum A-19 bulb (not included). Adjustable 16-1/2" overall height. Bullet style shade. cULus  Listed.

Rotary lampholder On/Off switch. Uses 40-watt maximum T10  bulbs (not included). 14-1/2" overall height, round base. Metal Shade. cULus Listed.

To connect track sections at right angles or straight end-to-end. Includes straight and right angle covers.

Easy to assemble, complete instructions included. 3-way switch. Uses 100-watt maximum A19 incandescent bulb (not included). 55" overall height. White fabric shade with trim. cULus Listed.

High impact, weather resistant housing and globe. Electronic circuit design for sub-zero degree starts. Automatic light sensor, night time ON, daytime OFF. Over 100 watts of light output. More energy efficient and lasts up to five times longer than comparable incandescent lighting. For patio or entrance lighting, outdoor use only. 13 watt fluorescent bulb included. Replacement bulb is 13W CFL GU-24 base.

Durable, weather resistant construction. For landscape and holiday lighting. Green with a 6' SJTW 18 gauge green cord and ground stake. cULus Listed.

Trim ring with phenolic baffle, 7-1/4" OD, for use with 6" housings, white trim with white baffle, for slope ceiling. Halo model number SLOPE H645IC, Orgill SKU number:140.7022. Sleeved.

Designed for use with Halo Power-Track and Lazer-by-Halo track systems. Lamp: 75W PAR30 (Short neck lamp only). 4" width x 4-1/4" depth, maximum extension 7-15/16".

Pendant lantern with clear seeded glass. Uses one medium base bulb, 60 watt maximum, (not included). 12-3/8'' height x 6-5/8'' width. cULus Listed. 36" chain.

FlexoLight Rope Light, Flexible, FlexoLight, 0.05 W, 120 V, 1/8 in Tubing, 12 ft Tubing Length, Clear Tubing, Miniature Incandescent Lamp, For Indoor or Outdoor use

Easy to assemble, complete instructions included. 3-way switch. Uses 150-watt maximum A19 bulb (not included). 71" overall height. cULus Listed.

Outdoor wall lantern with cast aluminum construction. Bent beveled glass panels. 14-1/2" high x 6-1/2" deep. Uses clear medium base bulbs, 100 watt maximum, (not included). cULus Listed.

For use with 120 volt Incandescent lamps. Aluminum construction for greater heat dissipation. For installations where housing will be in direct contact with ceiling insulation. Integral thermal protector guards against misuse of insulation materials and improper lamping. Adjustable socket bracket assures proper and consistent lamp positing. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts. Slide-N-Slide connectors allow non-metallic sheathed cable to be installed without removing knockouts. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist.  Installation: 7-1/2" height allows use in 2 x 8 joist construction. Housing accommodates ceilings up to 2" thick. Requires 6-1/2" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.

Clear glass jelly jar shade. Uses one clear medium base bulb, 60 watt A19 or 13 watt CFL maximum, (not included). 6" height x 4-3/4" width. cULus Listed.

Porcelain. Mounts on 4" outlet boxes with breakout for 3-1/4" box mounting. One piece with feed through. Terminal screws backed out for wiring without removing the interior. UL 496 Listed, NOM Certified, meets CSA requirements. 250 volt, 660 watts.

Porcelain, mounts on 4" outlet box with breakout for 3-1/4" box mounting. Interior is removable. Includes ball chain, 3' of cord, connector and end ball. UL Listed, meets CSA requirements, NOM certified. 250 volt, 660 watts.

Easy to assemble, complete instructions included. 3-way switch. Uses 100-watt maximum A19 incandescent bulb (not included). 55" overall height. White fabric shade with trim. cULus Listed.

Clear and white prismatic glass shade. Polished chrome finish. 6-3/4" diameter x 4-3/8" height. Uses one clear, medium base bulb, 60 watt maximum (not included). cULus Listed.

Lantern with clear seeded glass. Uses one medium base bulb, 60 watt maximum (not included). 12-3/8'' height x 6-5/8'' width, 7-1/2'' extension with wall mount. cULus Listed.

For installations where housing will be in direct contact with ceiling insulation. Air-tite fixture sealed and gasketed to prevent airflow between attic and living areas. Integral thermal protector guards against misuse of insulation materials and improper lamping. Junction box is listed for through branch circuit wiring and has seven 1/2" knockouts and four Romex knockouts with integral strain relief. Pre-installed captive bar hangers allow housing to be positioned at any point within a 24" joist span. Can be field shortened for 12" joist. Installation: 7-1/2" height allows use in 2 x 8 joist construction.  Housing accommodates ceilings up to 1-3/8" thick. Requires 5-3/4" ceiling opening. Listings: UL Damp Locations. UL Feed Through. UL Listed for direct contact with insulation. CSA Certified. IP Rated.