N 6566 is a pocket door guide for 1-3/8 in thick doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.

N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.

Johnson Hardware Door Edge Pull, Plate Size: 0.09 in, 0.62 in W, 2.94 in H, Aluminum, US3 Brass, Suitable for: 1-3/8 to 1-3/4 in Thick Doors

Use for joining two Johnson pocket door frames.

Johnson Hardware Privacy Lock, Edge Bore Diameter: 1 in, Cross Bore Diameter: 2-1/8 in, Backset Size: 2-3/8 in, US3 Brass

N 7410 is a four wheeled pocket door roller assembly used on a double track that has a 1-5/8 in inside width with a 1-3/16 in center to center measurement. The four 1 in Dia nylon convex rollers provide a smooth, long-lasting, quiet operation and are affixed to an adjustable stamped steel housing that slides into a stamped steel mounting bracket. Used on a 1-3/8 in thick door and 80 lb.

Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.

Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Overall size of 2-3/4 in H x 2-1/2 in D.

N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that makes it adjustable up to 3/8 in height. It can be used on pocket doors 1 in to 1-3/4 in thick and up to 100 lb. each.

Size of 3-7/8 in x 3/4 in x 1-5/8 in. Slim pak, polybagged.

N 7065 is a pocket door roller assembly used on Kennaframe, Crawford, Press-Rite and many other bi-fold door manufacturers. It is constructed of a nylon housing with 2 parallel 13/16 in ball bearing nylon rollers which provide for a smooth and quiet operation. This roller rides in a double "J" track and affixes to a stamped steel mounting bracket that clamps it into place after being adjusted to the correct height. This pocket door roller assembly is good for doors up to 100 lb.

N 7238 is a solid brass pocket door pull with a satin nickel finish. It is 2-3/4 in tall and fits doors that are 1-3/8 to 1-3/4 in thick.

Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.

N 7239 is a solid brass privacy lock and pull for a pocket door with a satin nickel finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.

N 6771 is a solid brass privacy lock and pull for a pocket door with an polished brass finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It is 2-3/4 in tall and can be reversed from left handed to right handed.

Hardware kit for 1500 Series pocket door frames includes #1120 hanger, #1513 bumper, #1550 guide, #1712 adjustment wrench and screws.

Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Dimensions of 1-1/2 in D x 2-1/4 in H.

Fits doors 1-3/8 to 1-1/2 in thick. Pre-assembled for doors opening left to right. Plates are reversible for doors opening right to left. Dimensions of 1-1/2 in D x 2-1/4 in H.

N 6848 is a top, center mounted, adjustable, tricycle style roller assembly. The three 1 in flat durable nylon rollers provide a smooth, long-lasting quiet operation. They are attached to a stamped steel & nylon carriage mounted on top of a threaded steel rod. The threaded rod catches into a bracket that locks it in place. Used on Johnson Bi-pass & Pocket Closet Doors.

N 6773 is a solid brass privacy lock and pull for a pocket door with an polished chrome finish. It fits doors that are 1-3/8 to 1-3/4 in thick. It can be reversed from left handed to right handed.

N 7161 is a solid brass pocket door privacy lock and flush edge pull in a Satin Chrome Finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 2-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.

Door preparation 2-1/8 in face bore 1 in edge bore. Adjustable for 1-3/8 in to 1-3/4 in. Latch bolt for flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.

Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.

Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.

Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.

Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.

Our innovative round design fits a standard 2-1/8 in drilled door, allowing easy installation with a standard screwdriver.

Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.

Thumbturn on inside and flat face on the outside. Door prep 2-1/8 in face bore 1 in edge bore. Door thickness adjustable for 1-3/8 to 1-3/4 in. Flat and beveled doors. Latch bolt fronts 1 x 2-1/4 in, round corner steel. Non-handed.

N 7368 is a solid brass privacy lock and pull for a pocket door with a classic bronze finish. It fits doors that are 1-3/8 to 1-3/4 in thick. The thumb turn engages and disengages the latch. It is 3-3/4 in tall by 2-1/2 in deep and can be reversed from left handed to right handed.