Solid steel, heavy-duty construction; unit is equipped with 118 of the most commonly used tools and accessories in custom formed tool specific organizers for ultimate storage and quick access; tool kit includes: Hex Key wrenches; 12 oz. Claw Hammer; 10' Measuring tape; 6" Long nose pliers; 9" Torpedo level; Twist drills; Masonry bits; Wood working drills; 8" Adjustable wrench; Screwdrivers; Magnetic Bit holder; Ratchet wrenches: 1/4", 3/8" and 1/2"; 3/8" Spark plug sockets; 2 Extension bars; Drive sockets: 1/4", 3/8" and 1/2"; Screwdriver bits: 25mm and 50mm; 18mm Zinc Alloy Knife; 10" Groove Joint pliers and 6" Lock Grip pliers; Ball bearings keep the drawers operating smoothly and minimizes wear and tear.

One-handed operation latch that allows for opening when the other hand is occupied; integrated water seal to help protect from water and dust; soft grip handle for easy grip and carrying; V groove on lid suitable for holding pipes and lumber while being worked on.

Heavy-duty weather & dent resistant aluminum construction. Reinforced frame and corners for added strength. Padded dividers and removable 17 pocket tool holder. Applications: Ideal for tools, hobbies and crafts, cameras and more. 2 Keyed Locks for security.

Made of durable rugged, polyester fabric. 36 triple row outside pockets, 25 double row inside pockets. Drill holder with side release buckle security strap. Designed to fit most standard 3-1/2 to 5 gallon buckets.

Advanced One-Handed Clamp system with exclusive clutch design for easy clamping. Front jaw swings up for vertical clamping. Folds for easy storage. Steel construction holds up to 550 pounds. Dual height for use as a workbench. Standard Equipment - Four Swivel Pegs. Specialized One-Handed clamp handle. Rubber feet. SPECIFICATIONS: Bench Height 31-1/8". Parallel Clamping 0 - 8-5/16", Parallel Peg Clamping 0 - 18-3/4", Diagonal Peg Clamping 0 - 29-3/8". Work Surface 20-3/4" x 29-1/8".

Advanced One-Handed Clamp system with exclusive clutch design for easy clamping. Advanced clutch design allows for fine-tuning. Folds for easy storage. Steel construction holds up to 450 pounds. Dual height for use as a workbench, bench tool stand, vise or sawhorse. Standard Equipment - Four Swivel Pegs. Specialized One-Handed Clamp handle. Rubber feet. SPECIFICATIONS: Bench Height 30-1/8". Parallel Clamping 0 - 9-1/4", Parallel Peg Clamping 0 - 16", Diagonal Peg Clamping 0 - 24". Work Surface 9-11/16" x 24".

All steel construction. Riveted bracket for added structural strength and featuring flared nail holes for quick and easy disassembling. For use with standard 2x4's. Black enamel finish.

Top case with integrated carry handle for power tools and small parts; long metal carry handle for easy grip and carrying the tote; heavy-duty design and durable structure; front push-button for easy detaching/attaching of the case to the tote unit; heavy-duty, anti-rust metal latches on top case.

All steel construction. Riveted bracket for added strength and flared nail holes for fast take-down. Four nail holes on top double holding power - to prevent separation from rail. Black enamel finish.

Only straight, 90 degree angled cuts are required; no miters or angles; add 2x4's to the '2x4basic' ProBrackets sawhorse to make a pair of versatile sawhorses in any length, width or height; lower shelf for extra storage; a pair of ProBrackets will hold up to 2000 pounds (900kg); package includes a pair (2) ProBrackets sawhorses, stabilizing feet and all hardware.

Constructed of heavy gauge steel. No nails, screws, bolts or miter cuts on legs required. For use with standard 2x4's. Wingnut locks legs and rail firmly in place.

Solid 16 gauge steel 48" and 36" boxes. 20 gauge steel 30" box. MIG welded seams for extra durability. Tamper proof locks keep tools safe. Recessed industrial strength handles. Heavy-duty locking hinge provides extra lid strength. Large and medium boxes are pre-drilled for casters (SKU 772.4156). Durable powder coat finish for rust-resistance and scratches. 48" - tool box: 48" L x 24" W x 27.5" D, volume:  18.4 cubic feet. 36" - tool box: 36" L x 17" W x 22" D, volume: 7.7 cubic feet. 30" - tool box: 30" L x 16.5" W x 11.9" D, volume: 3.4 cubic feet.

For Vulcan 48" and 36" job boxes (SKU 770.9892). Includes "brake" function.

Supports up to 1,000 pounds. Rust resistant galvanized steel. Folds easily for storage. Locking legs to support big jobs. Open Size: 32-1/2"L x 29-1/4"H. Collapsed size: 6" x 8" x 31-1/2".

Easy lift extended edge lid. Tall, deep handle recesses. Bolt cutter free locking system protects padlocks inside 12 gauge steel housings from cutting tools and pry bars. Padlocks (not included) cannot be pried or pulled out. Heavy-duty hinge is staked and welded to prevent the hinge pin from being driven out to break in. Heavy-duty 1" steel locking arm holds the lid open. Easy access 3-3/8" tall caster bolsters for adding optional casters (not included).

Easy lift extended edge lid. Tall, deep handle recesses. Bolt cutter free locking system protects padlocks inside 12 gauge steel housings from cutting tools and pry bars. Padlocks (not included) cannot be pried or pulled out. Heavy-duty hinge is staked and welded to prevent the hinge pin from being driven out to break in. Heavy-duty 1" steel locking arm holds the lid open. Easy access 3-3/8" tall caster bolsters for adding optional casters (not included).

Easy lift extended edge lid. Tall, deep handle recesses. Bolt cutter free locking system protects padlocks inside 12 gauge steel housings from cutting tools and pry bars. Padlocks (not included) cannot be pried or pulled out. Heavy-duty hinge is staked and welded to prevent the hinge pin from being driven out to break in. Heavy-duty 1" steel locking arm holds the lid open. Easy access 3-3/8" tall caster bolsters for adding optional casters (not included).

Clamping portable workstation; 37" clamping capacity with 2,200 lbs. of clamping force; foot operated clamping allows for both hands to control and position the work piece; 600 lbs. load capacity; all steel construction; tripod base for all-terrain stability; front roller for easy transport; folds quickly for compact transport and storage; stirrup feet allow for added stability.

22 exterior pockets, 12 interior pockets, hammer loop, tape holder loop, padded shoulder strap, side clips secure the organizer and reflective material.

Organize a wide range of tools and accessories, 14 double row pockets inside, 34 triple row outside. Security pocket with hook, loop closure. Drill pocket.

Adjustable leg folding sawhorse with five variable height adjustments. Yellow powder coating finish. Work surface thickness 0.079" (2mm) 14 gauge, leg thickness 0.067" (1.7mm) 15 gauge. Open range size, 38-1/4" W x 25-1/2", 40" H, folding size, 38-1/4" L x4'' W x 2-3/4" H, load capacity, 1200 Lbs, steel carrying handle.

Durable tool box with integrated organizer for small parts and connectors; extra wide carrying handle makes it easy to transport the box around the jobsite; heavy duty resin design stands up to the toughest daily abuse; top organizer detaches from tool box for added versatility; corrosion resistant latches keep your valuable tools safe and secure in the box; perfect storage solution for mechanics, electricians, maintenance workers, etc.

Easy lift extended edge lid. Tall, deep handle recesses. Bolt cutter free locking system protects padlocks inside 12 gauge steel housings from cutting tools and pry bars. Padlocks (not included) cannot be pried or pulled out. Heavy-duty hinge is staked and welded to prevent the hinge pin from being driven out to break in. Heavy-duty 1" steel locking arm holds the lid open. Easy access 3-3/8" tall caster bolsters for adding optional casters (not included).

M-D Folding Sawhorse, Heavy Duty, Steel, M-D, 1500 lb Load Capacity, 28-1/2 in Height, 31 in Width, Galvanized

One hand operation latch allows opening when other hand is occupied; innovative design with robust structure and large volume; extra-wide soft grip handle for easy lifting; removable tray allows enough space for larger tools to be stored underneath; organizers on top lid for small parts organization.

One hand operation latch allows opening when other hand is occupied; innovative design with robust structure and large volume; extra-wide soft grip handle for easy lifting; removable tray allows enough space for larger tools to be stored underneath; organizers on top lid for small parts organization.

Two lid organizers for small parts storage - accessible without opening the tool box; built-in pad lock eye for small locks - keeps contents secure; soft, wide rubber coated handle allows for easy and comfortable grip; tote tray inside to store smaller items.

Innovative design with robust structure and large volume; telescopic handle for convenient maneuverability and folds down for storage; removable tray allows enough space for larger tools to be stored underneath.

Innovative locking latches and carriage of 3 at once saves time; stacking option allows secured stacking of several organizers to save space and maintain organization; removable dividers provide high customization for small parts and larger hand tools; unique 90 degree angle in the main compartment design allows storage of hammers and angled tools or tape measures comfortably together with the small parts in the other nearby compartments; special lid structure - upper lid interlocking with dividers - prevents movement of small parts from one compartment to another.

One hand operation latch allows opening when other hand is occupied; innovative design with robust structure and large volume; extra-wide soft grip handle for easy lifting; removable tray allows enough space for larger tools to be stored underneath; organizers on top lid for small parts organization.