General grinding and removal, spiral turbo for a fast grind. For use with right angle grinders.

Evenly spaced holes prevents knotted wire tufts from shifting on the outer edge of the brush, providing a consistent brushing action.

Fine/Medium for light duty; Coarse for general purpose and  X-Coarse for heavy duty. 5/8"-11 Arbor-Max RPM 20,000. Carded.

3"diameter for 4-1/2" to 5" angle grinders. Recommended for DeWalt angle grinder Nos.DW400, DW402, DW814, DW458 and DW830. For heavy material removal.

Adapters for use on the DW402 grinder, 5/8"-11 shaft grinders to mount type 1 cutoff wheels.

Used for rough grinding, deburring and fast material removal of concrete, masonry and stone. Designed for general purpose applications.

Use with 4-1/2", 5", 7" grinders, fits 9015A, 9005B, 9067L, 9069, 9524NB, 9527NB, 9527PB, 9528PB, 9557NB/PB, 9558NB/PB, 9564/CV, 9565/CV, GA7011C.

Knotted wire brush for use on angle grinders for tasks such as weld cleaning, rust removal, spatter removal and surface preparation. Use to clean weld beads, angle weld and corners in tight places. For roughening, deburring and surface cleaning prior to welding. Wire size: .023, arbor hole 5/8''-11. Maximum speed 14,000 rpm.

Zirconia grit for faster material with Type 29 fiberglass backing for optimal grinding angle of 5-15 degrees, allows full use of disc. Premium abrasive cloth for longer life.

Zirconia grit for faster material with Type 29 fiberglass backing for optimal grinding angle of 5-15 degrees, allows full use of disc. Premium abrasive cloth for longer life.

For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.

For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.

For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.

For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.

For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.

For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.

For use on all bench and pedestal mounted grinders. 1" blade thickness, Type 1 wheel is designed for offhand deburring, sharpening, shaping and limited stock removal on all metal applications.

Single row for general grinding and removal. For use on right angle grinders.

General grinding and removal, spiral turbo for a fast grind. For use with right angle grinders.

Made of durable rubber and used as a back support for resin fiber discs on Grinders;  held in place by a lock nut. Can be cleaned with soap and water or a mild solvent.

For use with 7" and 9" handheld angle grinders or sanders. Fits Makita angle grinder Nos.9067L and 9069; and angle sander No.9060L.

Use with 7" or 9" grinders/sanders. Made with .014" carbon steel. Direct spindle mount with spindle mount washer No.261039-0. For use with Makita Model Nos:  GA7001L, 9067L, 9069; GA7911 & 9060L.

Use with 4-1/2" or 5" angle or disc grinders. Made with .014" carbon steel. Provides continuous brushing action and a relatively fine finish.  Direct spindle mount with washer (No.261039-0). For use With Makita Model Nos: 9524NB, 9527NB, 9527PB, 9528PB and 9005B;  9503BHZ & 9505BHZ. Applications: flat surfaces, edges, paint, scale & light rust removal.

For use with handheld  grinders. Steel reinforced with locking nut. 12,000 max rpm.

3"diameter for 4-1/2" to 5" angle grinders. Recommended for DeWalt angle grinder Nos.DW400, DW402, DW814, DW458 and DW830. For heavy material removal.

Highly specified wire grades, .020, are constructed with internal holding plate to ensure consistency and safety. Constructed for even balance which provides smooth performance. Used for weld cleaning, stringer bead weld cleaning, removal of weld spatter, heavy encrustations, scale, flash removal, deburring, roughening for adhesion.

For Makita and other 4'' angle grinders with M10 x 1.25 spindles. Converts M10 x 1.25 spindle to 5/8''-11. Maximum rpm: 20,000.

Zirconia grit for faster material with Type 29 fiberglass backing for optimal grinding angle of 5-15 degrees, allows full use of disc. Premium abrasive cloth for longer life.

Use with  4-1/2? to 5" angle grinders. Recommended for DeWalt angle grinder Nos.DW400, DW402, DW814, DW458 and DW830. Crimped style for flexibility. Applications:  Light Removal of Rust & Paint, &  General Cleaning.

Use with 4" angle grinders. Rugged knot construction of .020" Type 302 Stainless Steel Wire is corrosion resistant eliminating contamination problem. Use with spindle mount washer (261039-0). Use with Makita Nos.: N9501BZ, N9514B, 9523NBH, 9553NB. Applications: Use for tight corners & angle welds.