This 33 deg paper tape framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a push button. depend on this 33 deg paper tape framing nailer for efficiency.

Selectable trigger controls. Magnesium body with oil free motor eliminates oil carry over onto the work surface, metal cylinder for increased durability. Rotatable rear exhaust and belt hook. Specs: Height: 9.5"; Length: 10.25"; Weight: 2.6 lb; Reg. Operating Pressure: 70-120 psig (4.8-8.3 bar); Mode of Operation: Contact or Sequential Actuation. Fastener Specifications: 18 Gauge, 1/4" Crown, accepts 3/8"-1-1/2" length staples. Includes: Case, swivel air plug and wrench.

The NT50AE2 2 in 18 ga Brad Nailer is ideal for trim work, furniture building and other finish applications. It accepts finish nails from 5/8 in in length up to 2 in.

This 21 deg plastic collated framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 21 deg plastic collated framing nailer for efficiency.

For installing 1/2", 5/8" and 3/4" hardwood floors. Selectable drive mode to choose between single or multi-blow options. Graphite mallet with ergonomic comfort grip. Rubber bumpers protect pre-finished floors against marring. Specs: Weight 8.6 lbs; Magazine Capacity: 120 Cleat Nails; Fastener Specifications: Drives 1-1/2" to 2" Bostitch 'L' Shaped Hardwood Flooring Cleats. Includes: Flooring Nailer; Mallet; Flooring Adaptors (for 1/2" & 5/8" flooring); Flooring Hex Wrenches & Contractor Carrying Case

The SENCO PC1195 mini pneumatic hand nailer drives bulk nails up to 3 1/2 in applications to tight to swing a hammer.

"Lightweight and well-balanced for easy maneuverability. Tool free depth of drive adjustment to flush drive or countersink into varying material. Selective actuation for either sequential or 'bump' fire nailing with a simple flip of a switch for tool-less transitions. Specs: Weight: 7 lbs.; Air Inlet:3/8""; Operating Pressure 70-120 PSI; Air Consumption at 100 PSI.09 scfm; Depth Adjustment Tool-less; Actuation Selective; Jam Clearing; Open Nose: 18.2L"" x 4.9W"" x 12.7H"". Fastener Specifications: Fastener Type: Paper Tape Collation; Magazine Capacity: (.131)86-94 Nails; Magazine Loading: Rear; Magazine Angle: 35 Degrees; Fastener Length: Capacity 2in. - 3-1/2in.; Fastener Diameter: Range.113 - .148. Included: Safety Glasses."

Fits N50, N55, N57, N60, N63, N65, N70, N80, N86, N90; Also N100, 650, 750, 850, 863, T55, T60, RN45, N95RHN. Kit includes Bostitch TVA6 trigger assembly, valve assembly, lubricant, two orifice caps. Spring pin punch, complete instructions.

This 15 deg coil siding nailer is designed for wire weld and plastic inserted coil nails. Quickly and conveniently set nails to the desired depth. Depend on this 15 deg coil siding nailer for a lightweight and durable construction.

Integrated air duster button allows air from the compressor to clear away dust and debris from the work surface in preparation for the nail. Selective actuation switch lets the user easily select bump fire or sequential fire modes. Tool-less, easy-to-clear nose for quick and simple nail extraction, should a nail jam during use. Depth of drive dial allows the user to easily adjust the drive depth for a professional finish. Specs: Fastener Type16-Gauge Finish; Magazine Angle: Straight; Magazine Capacity: 100; Magazine: Top Loading; Operating Pressure: 70-120 psi; Actuation Selective: (Sequential/Bump Fire); Tool Length: 11-5/8"; Tool Width: 2-27/32"; Tool Height: 10-7/8"; Tool Weight: 3.7 lbs; GripRubber. Fastener Specifications: Fastener Length Capacity: 1"- 2-1/2"; Fastener Diameter Range: 16-Gauge. Included: Safety Glasses; Tool Fitting; No-Mar Tip; Case.

All air tool repair kits enable the users to recondition these tools at minimum cost and with little 'down time'. Special lubricant is provided with every O-ring kit. Contains all O-rings necessary to rebuild the N80, N90.

This 18 ga brad nailer kit is both lightweight and durable with easy maintenance. It is quiet and easy to maneuver. Depend on this 18 ga brad nailer kit for efficiency and durability.

Replaces worn or broken trigger valve for Stanley Bostitch N52FN, N62FN, N79RH, N79WW, N80SB, N88WW, N88PC, N90PT, N95RHN nailers. Kit includes TVA11, roll pin and lubricant.

Safety Mechanism prevents accidental firing. Quick release magazine for easy loading. Adjustable air exhaust, stapler viewer. 100 staples capacity, 60 to 100 psi pressure rating. Dimension of 8.1 in L x 2.2 in W x 8.9 in H. Tool weighs 2.9 lb. Fastener drives 1/4 in thru 9/16 in SUREBONDER #4 heavy-duty staples (same as arrow T50), 1/4 in, 5/16 in, 3/8 in, 1/2 in and 9/16 in staple lengths. Includes high-impact carrying case.

Magnesium body provides durable  and ultra light tool for comfortable extended use. Oil free motor eliminates oil carryover onto the work surface. Selectable trigger lets you control the fastening method with a flip of the switch. Rotatable rear exhaust and belt hook keeps dust and debris off work surface. Specs: Height: 9.75"; Length: 10.5"; Weight: 2.9 lb; Reg. Operating Pressure: 70-120 psi (4.8-8.3 bar); Mode of Operation: Selectable Actuation. Fastener Specifications: 18 Gauge, 5/8"-2-1/8" Brad Nails. Includes: Case, swivel air plug and wrench.

This mini impact nailer is lightweight and offers a comfortable grip. Depend on this mini impact nailer for convenience and maximum accessibility.

Drives both 18-gauge brads and narrow crown finish staples for ultimate versatility. Adjustable depth guide sets nails to desired depths quickly and conveniently. Tool-free adjustable exhaust conveniently directs exhaust away from the user. Specs: Height: 8.5"; Length: 9.25"; Width: 2"; Weight: 2.6 lbs; Driving Power: 135 Inch Lbs.; Magazine Capacity: 100 Brads or 100 Staples; Operating Pressure: 70-100 PSI; Thread Fitting Type: 1/4" NPT. Fastener Specifications: Range: 5/8" - 1-5/8" 18GA brads, (100) 1/2" to 1-1/2" 18 Gauge Staples. Kit includes: Nailer, 1/4" Air Fitting, Fastener Samples, Carrying Case, Hex Wrench, Extra No-Mar Tip and Oil.

It's fast, multi-directional stitching is a major benefit in applications like ridge beams and all types of sheathing.

Quick-clear jam release. Cylinder valve firing mechanism provides quick response and rapid driving. Depth of drive adjustment. Stapler diameter is16-gauge, straight magazine angle. 1/4" air Inlet. Operating pressure 70-120 PSI. Weight: 4.4 lb. Stapler capacity: 157. Drives 16 gauge, 7/16" crown staples from 1" to 2" length. Includes eye protector and Allen wrench for M5 screw.

Use this metal connector nailer STRAPSHOT? with metal framing hardware. Application is quick and precise. It is lightweight and easy to maneuver. Depend on this metal connector nailer strength and durability.

This 28 deg wire weld framing nailer is designed to drive nails into engineered lumber. It is lightweight for easy management and you can control the depth of the nail with a pushbutton. Depend on this 28 deg wire weld framing nailer for efficiency.

Lightweight easy maneuvering and all day work. Comfort and convenient features include: overmold comfort grip, overmold trigger, on-tool power adjustment, 360 degree adjustable exhaust and belt hook. No lubrication required. Specs: Height: 9.9"; Length: 9.8"; Weight: 2.7 lb; Reg. Operating Pressure: 70-120 psig (4.8-8.3 bar); Mode of Operation: Sequential Actuation. Fastener Specifications: Drives Slight & Medium Head 18 Gauge Brads from 5/8" - 2-1/8". Includes Carrying Case.

The FinishPro?42XP has established itself as the marquee tool for professional finish carpenters. The FinishPro?42XP has great durability and great performance.

Sequential Actuation. Adjustable depth-of-drive and exhaust. Belt hook, full soft grip with no-mar pad and rear bumper. Available in dual action or restrictive fire. Specs: Height: 10.88"; Length: 12.16"; Weight: 4.2 lb; Reg. Operating pressure: 70-120 PSIG (4.8-8.3 bar); Fastener specifications: Gauge: 16; Fastener Range: 1-1/4"- 2-1/2", Finish: Galvanized. Includes Case, Fitting & Oil.

Contains all O-rings necessary to rebuild the F21, F28, F33, N89C tools. Does not include trigger valve or trigger valve O-rings.

New selective actuation switch lets the user easily select bump fire or sequential fire modes. Lightweight and compact with 360 deg adjustable exhaust and elastomer grip. Tool-less, easy-to-clear nose and depth of drive. Weighs 2.2 lb, dimension of 10-11/32 in L x 2-3/8 in W x 9-1/8 in H. Air pressure is 70 to 120 psi, steel magazine, top nail loading type, single-contact-selector firing mode. Comes with no-mar tip, depth adjustment, adjustable exhaust port, rubber grip and jam clearing. Does not free from oil. Fastener has nail range of 1/2 to 1-1/2 in, staple capacity is 125. Includes safety glasses, Case and no-mar tipx2.

Tool-less depth of drive adjustment for precision nailing/flush driving. Carbide tipped push lever reduces wear. Pneumatic nail feed mechanism powers both the nail advance and return for consistent operation even in the harshest of conditions. 16 deg magazine angle, contact actuation, 3/8 in sequential air inlet, operating pressure is 70 to 120 psi, weighs 5.5 lb. Open-nose jam clearing, 120 nail capacity and 120 magazine capacity. Coil, wire collation is 7/8 to 1-3/4 in. Includes safety glasses and shingle guide assembly.

This flooring stapler kit is used for floor nailing. Pneumatic power drives nails and cleats into the wood surface quickly and efficiently. Depend on this flooring stapler kit for stability and a comfortable grip.

This round head coil framing nailer is a strong coil framing nailer. It is housed in aluminum and has a large-capacity magazine for durability and convenience.

Use this industrial flooring cleat nailer conversion kit to convert the flooring stapler kit into a hardwood flooring cleat nailer kit. This kit allows you to expand the flooring stapler kit's capabilities at a value.