Chrome vanadium steel blade. Chrome plated blade with magnetic tip. Line color transparent plastic handle.

Eazyload quick disconnect 1/4 inch hex screwdriver accessories bit holder. Ratchet switch for clockwise and counter-clockwise screwdriving and drilling operation. Ratchet switch locks for manual operation. Includes one each:  #1 and #2 Phillips 3 inch power bits, 4-5 and 8-10 slotted 3 inch power bits and 1/4 inch hexbit hex shank drill bit.

Ergonomically designed quad-lobular handle design provides maximum tip torque; slip-resistant rubber grip increases user comfort; precision machined and sand blasted tip grips faster, securely and resists slip out; lacquer coated bar resists rust; magnetic tip holds screw securely; color-coded handle for easy selection. Tip styles and lengths includes: Standard ? (1) 1/8? x 3?, (1) 1/4? x 1-3/4?, (1) 1/4? x 4?, (1) 3/16? x 4?; Cabinet ? (1) 3/16? x 6?; Phillips ? (1) 0 point x 2-1/4?, (1) 2 point x 1-3/4?, (1) 1 point x 3?; (1) 2 point x 4? and (1) 2 point x 6?.

Ratcheting action multi-bit screwdriver allows the user to turn in clockwise, counter clockwise, and locked positions. Tri-material handle and rubber comfort grip and maximum torque, quick-release mechanical bit holder, knurled chrome-plated barrel to resist corrosion.  Includes: Two Robertson bits; Phillips and Slot bits. Carded.

Four in one screwdriver with hi-torque fiberglass, reinforced nylon construction; electronically safe; UL tested at 2,000 volts; rare earth magnet retains both bits and screws. Includes (2) Phillips and (2) slotted standard power bits all retained in the handle; counter display carton.

Ergonomically designed quad-lobular handle design provides maximum tip torque; slip-resistant rubber grip increases user comfort; precision machined and sand blasted tip grips faster, securely and resists slip out; lacquer coated bar resists rust; magnetic tip holds screw securely; color-coded handle for easy selection. Set includes: (2) Slotted screwdrivers and (2) Phillips screwdrivers.

The convenience of a set of precision drivers in a one pocket tool. Non-slip textured surface has slip, crack and peel resistance. Magnetic bits attract and hold small screws. Soft and comfortable bi-material grip; Includes tip sizes: 5/32", 1/8", 1PT, 2PT.

Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a classic steel handle. Includes sizes: T10, T15, T20, T25, T27, T30, and T40. Carded.

Blade made of heat treated 8650 alloy steel (nickel-chromium-molybdenum) that is chrome plated to resist corrosion. Rotating cap, facets fit palm, recess fits finger tip, driver tip size shown on cap and a 8-sided non-slip cushion grip. Color coded ring identifies type of tip. Carded.

Steel core transfers force directly from strike cap to tip; shatter resistant cellulose, acetate handle tested under heavy load and extreme temperature; color-coded handle for easy selection from tool pouch. Tip styles and lengths includes: Standard ? (1) 5/16? x 5-1/8? and Phillips ? (1) 2 point x 5-1/8?.

Standard, fluted blade is made of alloy steel for long life with hardened tips that are slip resistant. Ergonomically designed handle for comfortable grip.

Locking feature protects fingers and improves productivity; solid steel side plate for added strength; keys lock into 3 positions (90, 135, 180) helps maneuver into awkward spaces and reduce slipping during use; durable and ergonomic design; set includes most popular sizes (S9, S10, S15, S20, S25, S27, S30 and S40); hex key shape is Star.

Features a removable jeweler?s carrier which can either be used alone or in conjunction with the 750 series Versa Grip handle; double-ended screwdriver blades provide viable solutions for most fasteners and are easily stored beneath the handle cap. Includes (8) double end bits: (1) #0 x #000 Phillips, (1) #0000 Phillips x 3/64" Slotted, (1) Slotted 1/8? x 5/64", (1) .50" x 1/16" Hex, (1) Hex 5/64" x 3/32", (2) Torx T5 x T8, T6 x T10.

Easy twist screw chuck holds blade securely in place, fingertip swivel head for greater control, 5 heat treaded blades, ergonomic handle for rapid rotation, greater comfort and control; precision screwdriver for mechanics, technicians, jewelers and do-it-yourselfers.  Includes one each: 1/16", 5/64" and 3/32", Slotted Tips are #00 Cross Point Tip and T-6 Torx Tip..

Magnetic shank holds bits securely in place. Ergonomic ProTouch grip provides maximum torque, comfort, and slip resistance. Internal storage keeps bits locked in place and close at hand. Includes: (1)  1/4" nut setter, (3) torx T15, T20,  T25, (2) #1, #2 Phillips, 1/4", 3/16" slotted.

Solid steel shafts that are color coded for easy identification. Ergonomic, high efficiency, high torque handle with cushioned rubber cover for slippage control.  Includes one each: 3/16", 1/4", 5/16", 11/32", 3/8" nut drivers.

Magnetic shank holds bits securely in place. Ergonomic ProTouch grip provides maximum torque, comfort, and slip resistance. Internal storage keeps bits locked in place and close at hand. Includes: (3)  1/4", 3/8", 5/16" nut setters, (2) torx #1,#2, (2) Phillips #1, #2, (2) slotted 1/4", 3/16".

Made with Eklind alloy steel that has been heat treated for optimum strength and ductility with a black finish to resist rust and a ergonomic handle. Includes sizes: T8, T10, T15, T20, T25, T27, T30, & T40. Carded.

Blade made of heat treated 8650 alloy steel (nickel-chromium-molybdenum) that is chrome plated to resist corrosion. Rotating cap; Facets fit palm, recess fits finger tip, driver tip size shown on cap and a 8-sided non-slip cushion grip. Color coded ring identifies type of tip. Carded.

Ultra small 4-in-1 pocket screwdriver is the same size and shape as a pen complete with a pocket clip. Capped for safety, this tool has 2 interchangeable chrome vanadium blade ends totaling 4 screwdrivers. Used by mechanics, technicians, hobbyists and do it yourselfers. Includes: 1/16",  1/8" Slotted tip and  #1, #100 cross point tip.   Shelf Pack in Display Box.

Precision machined and sand blasted tip grips resists slip out that is heat-treated with lacquer coated bar that resists rust. Ergonomically designed tri-lobular handle provides maximum tip torque; slip-resistant rubber grip with tip identification symbol molded onto side handle.

Provides 6 popular Phillips and slotted screwdrivers for a wide range of fastening applications. Swivel head handles provide precision and reach. Tough plastic shafts with soft cushion grips. Includes: 0-point and 1-point Phillips, and 1.4-mm, 2.0-mm, 2.4-mm and 3.0-mm slotted screwdrivers and plastic storage case. Carded.

Chrome plated bar resists corrosion, interchangeable bars maximize versatility, and slip-resistant rubber grip. Includes one each: #1, #2 Phillips, 3/16", 1/4" Slotted, 1/4", 5/16" nutdriver.

Features one Phillips and one Slotted screwdriver blade and a reversible ratchet; alternative to traditional screwdrivers. Blades are made from hardened tool steel, ratchet is made from plated steel, ratchet handle is reversible. Offset head for odd-angle access, provides more leverage than regular screwdriver. Includes 1/4" Slotted and #2 Phillips blades. Conforms to government specifications GGG-S-1408.

Standard fluted light blade/cabinet tip made of alloy steel nickel protected blades for long life and hardened tips for slip-resistant fit. Ergonomic grip.

Durable alloy steel blade with precision formed tips and chrome-plated bars ensure a more secure fit. Vinyl grip handle provides greater comfort. Used by electricians. Includes one each:  5/16 " x6" Standard  3/16" x 6", 3/8" x 8X" Standard, 1pt x 3" Phillips, 3/16" x 3" Cabinet, 2pt x 4" Phillips.  Carded.

Blades made of heat treated 8650 alloy steel (nickel-chromium-molybdenum) that is chrome plated to resist corrosion. Rotating cap; Facets fit palm, recess fits finger tip, driver tip size shown on cap and 600 and 700 series handles. Color coded ring identifies type of tip. Includes two (2) Slotted screwdrivers: 3/32" with 1-1/2" blade, 1/8" with 2-1/2" blade, three (3) Phillips screwdrivers: No. 00 with 1-1/2" blade, No. 0 with 2-1/2" blade, No. 1 with 2-1/2" blade. Carded.

Black oxide tips provide corrosion resistance and precise fit. Full size vinyl grip handle.

Standard blade and tip with full size vinyl grip.

Standard blade and tip with full size vinyl grip.