Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. For cutting stock 5/32" to 3/16" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.

Combination sets provide a selection of 6" blades  with universal shank. Applications: Cuts Rough Wood , Medium  & Thick Metal Metal.  Set Includes: (5) DW4802, (5) DW4808, (5), DW4811. Tough Case Provides Convenient Storage.

For hard or soft wood, plastic, mild steel and non-ferrous metal (for machines with speed reduction). For all vertical, stationary, floor standing 2-wheel band saws.

Bi-metal construction and electronic beam weld for stronger, longer lasting teeth; for heavy duty and demolition applications in wood and metal. Use with materials 3/16" (5mm) and thicker. Precision set teeth for faster, smoother cuts and 8 percent cobalt keeps teeth sharp longer.

Electronic beam weld allows for a more powerful bond. Bi-Metal blade increase blade life. Use with materials 1/8"-1/2" (3.2-1.3mm) thick. Applications: Composition Materials, Plastic, Pipe, Carbon Steel and Stainless Steel.

Includes (3) DW4802, Bi-Metal, 6", 6TPI, (2) DW4811, Bi-Metal 6", 18 TPI, (3) DW4809, Bi-Metal, 8", 14 TPI, (3) DW4803, Bi-Metal, 9", 6 TPI, (1) DW4865, 9", 10 TPI, Demolition Blade, (1) Tough case.

Bi-Metal blade made with 8 percent  Cobalt keeps teeth sharp longer and increases blade life. Use with materials 3/16" (5mm) and thicker. Electronic beam weld allows for a more powerful bond. Applications: Wood and Nail Embedded Wood.

Thin kerf for up to 35 percent more cuts per charge.  Short blade length for cutting in tight locations. Bi-metal construction for increased tooth durability and long blade life. Set Includes:  (2) Wood Blades, (3) EMT Blades, (2) Duct Blades, (3) PVC Blades, & Storage Pouch.

Contains 2 each of Nos.T101B, T144D, T119BO, T118A, and T118B, in a reusable plastic storage box. Rental.

Design provides long blade life that is shatter resistant; bi-metal design provides the flexibility and durability single-metal blades can't.  Applications: Non-Ferrous & Thin Metal.

Tooth design utilizes sharper tooth geometry for faster cut rates. Aggressive shank angle increases tooth contact, maintaining cutting speed as blade wears for longer blade life. Anti-stick coating minimizes friction and gumming.

For table or radial arm saws for cutting slots, grooves, dadoes and rabbets in soft or hardwood. Cuts dadoes in everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super-smooth dado bottom and the flexibility of an adjustable dado to handle undersized plywood. Anti-kickback design. Eliminated hub, added extra thick and stiff outside plate and gullet designed for max chip ejection to prevent chip buildup within stack. 3/32" thick chipper for adjusted cut widths in 1/32" increments, doubles the number of slot widths available, and fits plywood 1/32" undersized from nominal width with less shimming. Shim set included for fine adjustments. Square tooth design, shorter and thicker, reduces drag in cuts and the materials guiding effects; also increases number of sharpenings obtainable. Includes four 1/8", one 3/32" and one 1/16" chipper; 1/8" kerf.

Fits all universal shank jigsaws. Very smooth cuts in wood up to 2".

Features an assortment of standard wood and Ice Hardened metal cutting Sawzall blades for a broad range of professional applications. Set includes two 6" wood cutting blades for increased control, two 9" wood cutting blades for greater cutting capacity, two 6" 14TPI blades for medium to thick metal cutting and two 6" 18 TPI blades for thin metal cutting. Set also includes a roll-up pouch for convenient blade storage.

Bi-Metal blade made with 8 percent  Cobalt keeps teeth sharp longer and increases blade life. Use with materials 3/16" (5mm) and thicker. Electronic beam weld allows for a more powerful bond. Applications: Wood and Nail Embedded Wood.

Electronic beam weld allows for a more powerful bond. Bi-Metal blade increase blade life. Use with materials 1/8"-1/2" (3.2-1.3mm) thick. Applications: Composition Materials, Plastic, Pipe, Carbon Steel and Stainless Steel.

Matrix II type alloy high speed steel, 8 percent Cobalt cutting edge. Shatter resistant blade and shock resistant precision milled teeth. Tuff tooth technology for smoother feel, faster cut, longer blade life and reduced blade strippage. Universal shank. Applications: Fast Cuts in Wood, Nail-Embedded Wood and Non-Ferrous Metal up to 3/16" thick.

High performance in abrasive materials. Cuts through tough materials that resist chip-forming. Applications: Fiberglass, Granite, Cement & Plywood.

Designed to minimize friction and heat build-up while cutting through the widest variety of metal material. A revolutionary new blade design that delivers up to 100 percent longer blade life and 25 percent faster in metal cutting. Applications: Structural Steels and All Metals 1/16"?1/4".

Bi-metal construction and electronic beam weld for stronger, longer lasting teeth; for heavy duty and demolition applications in wood and metal. Use with materials 3/16" (5mm) and thicker. Precision set teeth for faster, smoother cuts and 8 percent cobalt keeps teeth sharp longer.

Design provides long blade life that is shatter resistant; bi-metal design provides the flexibility and durability single-metal blades can't.  Applications: Non-Ferrous & Thin Metal.

Optimized for specific application. Shatter resistant, bi-metal design provides the flexibility and durability single-metal blades can't. Applications: Non-Ferrous & Thick Metals, Nail-Embedded Wood, Plastics, & Composites.

Matrix II type alloy high speed steel, 8 percent Cobalt cutting edge. Shatter resistant blade and shock resistant precision milled teeth. Tuff tooth technology for smoother feel, faster cut, longer blade life and reduced blade strippage. Universal shank. Applications: Fast Cuts in Wood, Nail-Embedded Wood and Non-Ferrous Metal up to 3/16" thick.

Designed for surface prep and material removal application with all Hackzall and Sawzall Recip Saws.

Designed for surface prep and material removal application with all Hackzall and Sawzall Recip Saws.

Designed to quickly and accurately remove grout; fits all "Sawzall" and "Hackzall" Recip Saws; curved cutting edge for maximum accuracy; coarse carbide grit effectivley removes all epoxy and cement-based grout types, 1/8" up to 3/4"; corrosion resistant coating for longer life.

Hard and uniform tooth point is electron beam welded to a tough durable backing with high flex life for faster cutting and longer blade life. For use with portable band saws. METAL CUTTING: For cutting stock 5/16" to 1/2" thick. Recommended for cutting aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel and tougher steels including stainless, chrome, tungsten steel plus other problem material at slow speed.

A wider, thicker body than conventional blades. T2 technology blade design that delivers up to 100 percent longer blade life and 25 percent faster.  Shatter resistant, bi-metal design provides the flexibility and durability single metal blades can't. Applications: Structural Steels and All Metals 1/16"-1/4".

Electronic beam weld allows for a more powerful bond. Bi-Metal blade increases blade life. Applications: Cuts all metals including non-ferrous, pipe, conduit, stainless and sheet metal. Use with materials 1/16"-3/8" (1.5mm-10mm) thick. Depending on blade TPI.

Fits all reciprocating saws. Includes one of each: 1/16"+ Spyder Grout-Out with carbide grit edge and for joints 1/16 -3/16"; 2" Spyder Scraper for tough materials and precision scraping; and 6" 10/14 (general/metal) Spyder Bore-Blade use to plunge and cut forward and backward.