Campbell Single Jack Chain, Trade Size: 16 in, Steel, Zinc, Silver, Material Diameter: 1/16 in, 250 ft L

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. The Playground Equipment Association has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust.

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust.

For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

SpeeCo Lynch Pin, Standard, Specifications: 1/4 in Pin Dia, Carbon Steel, Zinc-Plated, Dimensions: 2-1/8 in L x 6-1/2 in W

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain.

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust.

Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1 in ID, Chain Size: #7, Steel, Nickel-Plated

Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting.

For connections of chain and attachments (Not for overhead lifting). Do Not exceed working load limit.

Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Zinc, Silver, Material Diameter: 9/64 in, 350 ft L

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain.

Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Low Carbon Steel, Zinc, Silver, Material Diameter: 9/64 in, 275 ft L

Use for hanging plants and lamps, drapery tie-backs. Do not use for overhead lifting.

Forged carbon steel for maximum strength. Spring steel snap rings. Zinc-plated to resist rust.

Campbell Double Loop Chain, Working Load Limit: 255 lb, Trade Size: #2/0, Carbon Steel, Zinc, 250 ft L

Use for fixture and novelty suspension, general utility use not requiring high strength. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.

Campbell Straight Link Coil Chain, Working Load Limit: 520 lb, Trade Size: #2, Inside Link Width: 0.34 in, Inside Link Length: 1.29 in, Carbon Steel, Zinc, Material Diameter: 0.18 in, 190 ft L, Links per Foot: 9.3

Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #7, Steel, Nickel-Plated

For fixture/novelty suspension, general utility use not requiring high strength. Warning, do not exceed the working load limits for chain or components. Do not use for overhead lifting or hoisting. Do not use if the chain or components are visibly distorted or worn.

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.

For playground and gymnasium equipment (1/0 and larger), farm and animal chains and many general-purpose applications. Do not use for overhead lifting. The Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain.

Campbell Sash Chain, Working Load Limit: 106 lb, Steel, Bright Zinc, 100 ft L

For playground and gymnasium equipment (1/0 and larger), farm and animal chains, and many general-purpose applications. Do Not Use for overhead lifting. *Not Recommended for swing sets; the Playground Equipment Association, which has adopted the min of 1/0 Inco coil chain. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.

Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Warning, Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit]. Use only duty rated shackles, with embossed WLL, for overhead lifting.

Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.

Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 2 in ID, Chain Size: #3, Steel, Nickel-Plated

Campbell Welded Ring, Working Load Limit: 200 lb, Ring Diameter: 1-1/4 in ID, Chain Size: #4, Steel, Zinc

For hanging fixtures and plants, animal ties. WARNING: DO NOT EXCEED the working load limits for chain or components. DO NOT USE for overhead lifting or hoisting. DO NOT USE if the chain or components are visibly distorted or worn.