Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.

Contains everything necessary for complete installation including 6 ft conduit, two straight fittings and one 90 deg fitting. Totally non-metallic system provides assured grounding for safety. Non-conductive, non-corrosive. Easy-to-install. UL Listed components.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

Carlon Conduit, Flexible, Trade Size: 3/4 in, PVC, 6 ft L

-resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum.

Resistant to rust, cracks and separation. Constructed with two different PVC materials. 600 V stranded copper THHN/THWN conductors and UL listed LFNC-B fittings. 12 in wire leads are left exposed at each end. Green insulated copper grounding conductor. Intended for 208/240/480 V. UL/CSA, complies with NEC Article 356.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard no 1569 and Article 334.

Ultratite Type NM is manufactured with rigid PVC reinforcement imbedded within a flexible PVC wall. The construction provides excellent impact and crush strength while remaining highly flexible. The conduit resists oils, mild acids and exposure to sunlight.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard no 1569 and Article 334.

Clean, smooth metal interior for easy wire pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultra bond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.

Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above-grade. Colored in brilliant electric blue. For indoor use. UL listed.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and down-time due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above-grade. Colored in brilliant electric blue. For indoor use. UL listed.

Clean, smooth metal interior for easy wire pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultra bond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and downtime due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.

Designed for use with 90 deg C conductors, the hand bendable conduit offers the safety of assured grounding. For 600 V use in walls, floors and ceilings in residential, commercial and industrial buildings not more than three floors above grade. Colored in brilliant electric blue. For indoor use. UL listed.

Carlon Flexible Conduit, Liquid Tight, Trade Size: 1/2 in, PVC, Gray, 100 ft L

Liquidtight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex? conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline. Carflex? conduit is strong and lightweight and, because it weighs 50% less than metallic systems, it's easy to handle, transport and install. Carflex? is ideal for industrial, air conditioning, heating and outdoor lighting applications.

Half the weight of steel AC, no couplings, elbows or special bending tools required. Cuts up to 5X faster than steel MC. Rated at 90 deg C. Conforms to UL Standard No 1569 and Article 334.

Alflex Type RWA is manufactured with a lightweight, high-strength aluminum alloy. Metal strip is helically formed into continuously interlocked flexible metal conduit that can withstand impact and crushing forces.

Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and down-time due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.

Liquid tight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline. Carflex conduit is strong and lightweight and, because it weighs 50% less than metallic systems, its easy-to-handle, transport and install. Carflex is ideal for industrial, air conditioning, heating and outdoor lighting applications.

Clean, smooth metal interior for easy wire-pulling and requires no special tools for cutting or bending. Type UL sunlight-resistant and integral copper ground wire for use where UL listing is required. Provides the safest possible protection from moisture, oil, chemicals, acid, alkaline and ozone. Tough Ultrabond, anchored polyvinyl chloride, extruded cover seals the spirally-wound, square-locked flexible galvanized steel core. Eliminates maintenance and down-time due to wiring failure. Approved for use in temperatures from 80 deg C dry, 60 deg C wet, 34 deg C cold. PVC jacket is made with a sunlight-resistant UL compound.

Liquid tight flexible non-metallic conduit provides great wire protection in harsh, damp environments. Carflex conduit is non-conductive, non-corrosive and resistant to oil, acid, ozone and alkaline. Carflex conduit is strong and lightweight and, because it weighs 50% less than metallic systems, its easy-to-handle, transport and install. Carflex is ideal for industrial, air conditioning, heating and outdoor lighting applications.