Designed to join two pieces of Stanley's 105270, 105676, 105213 and 105726 box rail. Meets ANSI/BHMA A 156.14. Includes lags.

Designed for use as a heavy-duty guide on large, sliding doors up to 3-3/4 in thick. Slots in frame provide adjustment for holding doors against wood walls or posts. Delrin wheel is reversible; it can be used either side of frame. Offers sturdy steel frame construction. Meets ANSI/BHMA A 156.14. Roller is adjustable. Includes nail and lag screw holes. Hardened steel bolt for greater strength. Display packed.

Designed for use on wood-frame, metal-clad doors using a 2 x 4 in or 2 x 6 in frame with Stanley's 105270, 105676, 105213 and 105726 box rail. Includes two washers, 4 hex nuts and two end caps per pair. Made of durable one-piece, precision-formed steel. Offers self-lubricating Delrin bearings. The 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusted laterally 1 in by turning offset bolt for desired clearance. Can hold 450 lb per pair. 9 in bolt. Boxed.

Designed for mounting a double run of #5114 or #5116 box rail. Includes 4 lag bolts, 2 carriage bolts and 2 nuts. Suitable for use on corrugated metal siding due to narrow mounting surface. 1 bracket should be installed every 2 feet of rail. Adjustable to bring rail closer or further away from building. Can be used with flashing with the 5151 flashing bracket. 300 lb. safe working load.

Designed for bi-parting wood sliding doors at least 1-1/2 in thick. Cam action and adjustable hook holds doors tightly together. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. 15 in long hook. Boxed.

Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.

Rigid with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.

Flexible with single door strap. Designed for use on wood-frame sliding doors from 1-1/2 to 2 in Thick. Slot in top of door strap allows lateral and vertical adjustment. 450 pounds capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings. Boxed.

Designed to hold wood and metal doors firmly in place against the door jamb on farm and utility buildings. It also can be used for end gates on stake trucks. Offers 7 in hook. Designed for right- or left-hand applications. Pre-punched, reversible strike plate for use on 1-1/2 in or 3-1/2 in thick door frames. Boxed.

Boxed.

Designed for single sliding or bi-parting metal or wood doors. Intended to take abuse from trucks, tractors and farm machinery when used around factory and farm buildings. Smooth ramp on each side of the guide prevents cutting tractor or truck tires. Mounts on concrete floors with lag screws and shields or on a 6 in x 6 in post. 1/2 in rod or bolt inserted through hole in each side will serve as a center stop for bi-parting doors. Meets ANSI/BHMA, A 156.14. Manufactured from hot-rolled steel. Boxed.

Designed for use with box rail on wood-frame or metal clad doors using a 2 x 4 in or 2 x 6 in frame. For use with #59 or #5110 box rail. Packed with two washers, 4 hex nuts and two end caps per pair, seventeen 3/8 x 2-1/2 in lag bolts also are included for mounting rail. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6 in adjusts laterally 1 in by turning offset bolt for desired clearance. Safe working load - 225 lb per hanger. 9 in bolt.

Designed for use with box rail on wood-frame sliding doors from 1-1/2 to 2 in Thick. For use with #59 or #5110 box rail. Packed with nine 3/8 x 2 in lag screws for mounting rail and two end caps. Hangers have vertical and lateral adjustments that can be made from outside building. Durable one-piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt is threaded 5-1/2 in with a lateral adjustment of 1 in by turning bolt. Safe working load - 225 lb. per hanger.

National Hardware Double Splice Bracket, Specifications: 300 lb Working Capacity, Steel, Galvanized, Suitable for: #5114 or #5116 Double Run Box Rail, Includes: (2) Carriage Bolts, (4) Lag Bolts and (2) Nuts

Designed for use with box rail on wood-frame or metal clad doors using a 2 x 4 in or 2 x 6 in frame. For use with #5100 or #5103 box rail. Packed with two washers, 4 hex nuts and two end caps per pair, also contains two #5151 flashing brackets. Durable one piece, precision formed steel. Comes with self-lubricating Delrin bearings. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 6 in adjusts laterally 1 in by turning offset bolt for desired clearance. Safe Working Load - 225 lb per hanger. 9 in bolt.

With slots for 5120 flashings. Boxed loose.

Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.

Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.

Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.

Designed to attach #6004 guide rail. Slotted hole in each leg allows for both lateral and vertical adjustments. Bolts, nuts and washers are included for easy attachment.

Without screws. Each loose.

Designed for use with box rail on wood-frame, metal-clad door using a 2 x 4 in or 2 x 6 in frame. For use with #59, #5100, #5103, #5104, #5105, #5110, #5114 or #5116 box rail. Packed with four washers, four hex nuts and two end caps per pair. 1/2 in offset bolt adjusts both vertically and laterally from inside door. Connecting bolt threaded 7 in adjusts laterally 1 in by turning offset bolt for desired clearance. Durable one-piece, precision formed steel. Each hardened axle has 12 hardened and precision-ground alloy steel roller-bearings. Delrin seals keep out dirt while holding in long-life grease. Safe working load - 300 lb per hanger. 9 in bolt.

Designed for use on doors 1 in Thick with National #5430/5433 Trackmaster round rail and #5450/5455 flashing. Boxed loose.

With bolt, nut and washer. Pack loose.

Designed for use with #5430, #5433, #5460 and #5465 round rail. Unique collar design supports the end of two rails while not interfering with flat mounting surface of rail. Fasteners are not required. Can be installed after rail is mounted to building. Rail bracket spacing holds collar in place.

Designed for use with round rail on wood-frame, metal-clad doors using a 2 x 6 in top lateral. 1/2 in offset 9 in bolt (with 7 in thread) adjusts door vertically and laterally (1 in) from inside building. Flexible trunnion design resists door damage. Precision-ground and hardened steel roller bearings, axles and sleeves provide longer life and easier operation. Interchangeable with other brands of round rail. Safe working load - 300 lb per hanger.

600 lb capacity. Pair flexible with door strap. Boxed.

Rigid with 2-51F and 1-51G brackets with lag. Designed for use on wood-frame sliding doors from 1-1/2 in to 2 in thick. Slot in top of door strap allows lateral and vertical adjustment. 1 pair 5005 box rail hangers, 450 pound capacity per pair. Packed with two end caps and bolts for attaching door strap. Made of durable one-piece, precision-formed steel and has self-lubricating Delrin bearings.

National Hardware Center Latch, Heavy Duty, Zinc Plated

Designed to be used with #5400 round rail to mount double runs of rail for by-passing doors to side of building installation. Includes lag bolt, (2) carriage bolts and (2) nuts. (1) Bracket should be installed every 2 ft of rail. Suitable for use on corrugated metal siding due to narrow mounting surface.