Hard setting, seals all common gasketing materials in low temperatures and low pressure applications. -65 to 350 degrees Fahrenheit temperature range. Resists diesel fuels and most shop fluids. Use for hose connections and paper/cardboard gaskets.

Resists water, gas and oil leaks. Use for carburetors, water pumps, transmissions, fuel pumps, etc. Shrink wrapped.

OEM specified. For dealership warranty requirements, ensures extended drivetrain warranty compliance. Fast-curing formula. Sensor safe, low odor, noncorrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties. Temperature range -65 to 500 degreesF (-54 to 260 degreesC) intermittent. Resists auto and shop fluids and vibration. Non-flammable, non-toxic.

Single component, room temperature vulcanizing compound designed to provide "formed-in-place" gaskets for mechanical assemblies. Replaces most cut gaskets, can be used as a gasket maker or dressing. Temperature range of -65 to 500 degrees F intermittent. Cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket that resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Non-flammable and non-toxic.

Fast drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use for freeze plugs, threaded connections and manifold gaskets. Use on cork, metal, plastic, gaskets, pipes and flanges.

Slow drying, non-hardening sealant designed  for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use where sealing is more important than adhesion for valve cover and oil pan gaskets. Use on gaskets, flanges, pipe joints and threaded connections.

Seals parts and prevents leakage. Shrink wrapped.

Slow drying, non-hardening sealant designed  for sealing cut gaskets and stamped parts. Allows for easy disassembly if required. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use where sealing is more important than adhesion for valve cover and oil pan gaskets. Use on gaskets, flanges, pipe joints and threaded connections.

For mechanical repair and household use. Provides a flexible oil tight and water tight seal even under pressure that won't crack, crumble or dry out. Adheres to glass, fiberglass, painted surfaces as well as most rubbers, plastics and metals. Withstands temperatures up to 400 degrees Fahrenheit. Is OEM specified, sensor-safe and unaffected by vibration.

Fast drying, hard-setting sealant designed for sealing rigid materials and flanges, or patching holes and joints where permanent assembly is desired. -65 to 400 degrees Fahrenheit temperature range. Resists common shop fluids and fuels. Use for freeze plugs, threaded connections and manifold gaskets. Use on cork, metal, plastic, gaskets, pipes and flanges.

Seals, bonds, insulates, repairs, mends, and secures glass, metal, plastic, fabrics, vinyl weatherstripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof, flexible and shock resistant. -60 to 204 degrees C, -80 to 450 degrees F temperature range. Resists oil, water, weather, vibration, grease and shop fluids. Use for windshields, door frames, electrical connections, seams and roofs, vinyl tops and weatherstripping.

Will not foul oxygen sensors. Replaces almost any cut gasket, makes reliable formed-in-place gaskets that withstand high temperatures and high pressures. Resists cracking, shrinking and migrating. Coats pre-cut gaskets to increase reliability. First generation 1970-1980 gasket maker. Withstands temperatures -65 to 500 degrees Fahrenheit intermittent. Resists auto and shop fluids. Use for valve covers, oil pans, timing covers, water pumps, thermostat housings and transmission pans.

Seals, bonds, insulates, repairs, mends, and secures glass, metal, plastic, fabrics, vinyl weatherstripping and vinyl tops. Protects, waterproofs and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof, flexible and shock resistant. -60 to 204 degrees C, -80 to 450 degrees Fahrenheit temperature range. Resists oil, water, weather, vibration, grease and shop fluids. Use for windshield, door frames, electrical connections, vinyl tops, seams and roofs.

Wicking action seeks the leak, flows into hidden and hard-to-reach areas. Forms a tough, waterproof, durable, clear seal resistant to weather, extreme temperatures, vibration, shock and most shop chemicals. Fills surface voids and irregularities. -80 to 450 degrees Fahrenheit temperature range. Use for windshields, sunroofs, windows, headlamp assemblies, marine glass, RV vents and windows.

Conditions gaskets for longer life and seals potential leak paths. Non-hardening, soft-setting formula. Oil and fluid resistant. Temperature range -65 to 400 degrees F. For use on cut and formed rubber gaskets and composite, paper and cork gaskets.

Seals parts and prevents leakage. Use for oil pan, fuel pump, timing cover, various mountings and housings.

Low odor, noncorrosive. Outstanding oil resistance and joint movement values. More flexible than cork/composite gaskets; more oil resistant than conventional silicones. -75 to 500 degrees Fahrenheit intermittent temperature range. Resists auto and shop fluids and vibration. Use for valve covers, oil pans, timing covers, transmission pans and differential covers. Designed and recommended for post-1980 V-6 and V-8 engines; meets or exceeds OEM specifications for RTV.

For two and four cycle engines. Solvent-based bond seals within 20 minutes. Effective on irregular and uneven joint surfaces. For use on frequently disassembled engines. Resists gasoline and other damaging fluids. Withstands temperatures of 350 degrees F continuous, 400 degrees F intermittent.

Designed and recommended for post-1980 4-cylinder, turbocharged or high performance engines. Low odor, non-corrosive. Superior adhesion. More oil resistant than conventional silicones; more flexible than cut gaskets. -75 to 700 degrees Fahrenheit intermittent temperature range. Resists auto and shop fluids and vibration. Use for exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat housings, intake manifold gasket dressings, transmission pans and timing chain covers.

Withstands the harsh detergents and friction modifiers found in AT fluid. Developed with US automotive OEMs and complies with extended warranty requirements. Resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Benefits include improved transmission oil resistance, good adhesion while retaining flexibility, sensor-safe, noncorrosive and can be used as a gasket maker or dressing. Non-flammable, non-toxic, low odor.

Formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Tested to OEM specifications. Seeks and seals leak paths.

Designed for high torque applications, predominantly Japanese designs requiring a unique RTV gasket. Exceeds manufacturers performance requirements. Low odor, noncorrosive. Outstanding oil resistance. Guaranteed not to leak. Temperature range -65 degrees F to 650 degrees F intermittent; resists auto and shop fluids and vibration. Applications include valve covers, oil pans, intake manifold end seals, timing covers, water pumps and thermostat housings.

For dealership warranty requirements, insures extended drivetrain warranties compliance. Fast-curing formula. Low odor, non-corrosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties.-54 to 260 degrees C (-65 to 500 degrees F) intermittent temperature range. Resists auto and shop fluids and vibration. Use for valve covers, oil pans, intake manifold end seals, timing covers and transmission pans.

Formulated for oxygen sensor equipped engines. First generation 1970-1980 gasket maker. -75 to 650 degrees Fahrenheit temperature range. Resists auto and shop fluids. Use for valve covers, oil pans, timing covers, water pumps, thermostat housings and transmission pans.

Formulated for high temperature applications and heavy duty use such as towing. Replaces almost any cut gasket by making reliable formed in place gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temperature range -75 degrees F to 650 degrees F intermittent. Resists auto and shop fluids. Applications include valve covers, oil pans, timing covers, water pumps, thermostat housings and transmission pans.

Gasket dressing and flange sealant, f or superior fluid resistance, withstands extreme temperature changes without hardening. Non-setting, non-hardening, remains tacky even with rapid changes in temperature, enabling repeated assembly and disassembly of parts. Suitable as either a gasket maker or dressing. Seals surface imperfections between metal parts. Operating temperature range of -60 to 500F (-50 to 260C).

For quick, permanent repairs to leaks in all types of plastic tanks including coolant or windshield washer reservoirs, and radiator overflow, water, or waste tanks. Repairs cracks up to 4" long and holes up to 3/8" diameter for cars, trucks, boats and RVs. Complete kit includes everything needed for repair and easy-to-follow instructions. Fast curing, can make repairs in 30 minutes. Not for use on fuel tanks.

For quick, permanent repairs to leaks in all types of metal fuel tanks including portable or car metal fuel tanks without welding. Repairs cracks up to 4"l ong and holes up to 3/8" diameter for cars, light trucks, and commercial vehicles. Complete kit includes everything needed for repair and easy-to-follow instructions. Fast curing, can make repairs in 30 minutes. Not for use on plastic tanks.

OEM specified. Formulated for high-temp applications, or heavy-duty use (such as towing). Replaces almost any cut gasket by making reliable "formed-in-place" gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. -65 to 650 degrees Fahrenheit intermittent. Resists auto and shop fluids. First generation 1970-1980 gasket maker. Use for valve covers, oil pans, timing covers, water pumps, thermostat housings and transmission pans.

For making formed-in-place gaskets and seals on engine parts, cars, and appliances. Also repairs household electrical cords and plugs. Waterproof and airtight seal that resists UV, oil and grease, and extreme temperatures from -60 to 400 degrees Fahrenheit. 100-percent silicone stays flexible and will not chip, crack, shrink or crumble. 5 minute working time, 30 minute tack free time, 24 hour cure time.