Patented triple ground universal teeth eliminate binding and cut easily through  almost any building material; high strength molded handle offers increased comfort and control; tapered blade nose offers added clearance in tight spaces and increased blade stability during the cut; thick blade body features a durable lacquer coating that allows it to slide through the material easily; integrated 90 and 45 degree angle markings provide a reliable straight edge for marking cuts.

Easy start with 12pt. extra-fine front teeth, thick-body blade delivers rigidity and control and tapered pitch nose improves clearance and stability. M2 tooth technology, advanced tooth geometry and tri-ground teeth provide a fast, efficient cut. Deep gullets provide rapid removal of chips.

Rugged, lightweight frame with screw-operated lever for tensioning the blade up to 30,000 PSI. Blade can be positioned for 45 or 90 degree cutting and spare blades can be stored inside frame; end of frame can be used as a jab saw.

High speed steel cutting edges electronically welded to alloy spring steel backs. Shatterproof, sharper, harder, tougher teeth cut faster with less breakage.

Saw has an aggressive three sided tooth design; back of saw can be used to mark 45 and 90 degree angles and teeth can be re-sharpened; select hardwood handle provides comfort and control.

Unique tooth geometry which features a 3 sided edge design. The teeth are induction hardened, so they will hold their edge longer and resist damage that could occur when contacting nails and staples embedded in wood; also has a low friction ToughCoat blade coating that keeps the saw cutting smoothly through the material with less binding and the rigid aluminum handle helps you stay on your line.

Cuts on pull stroke for easier sawing. Extra fine crosscut, medium to fine rip cut with thin, spring steel blades which are durable and rust resistant. Ground and impulse hardened tri edged teeth are razor sharp to cut cleanly and accurately. Saws have blade guards to protect teeth when not in use and can be quickly disassembled for convenient toolbox storage.

Thick-Body (1mm) blade. Aggressive 'Tri-Ground' teeth. Hardwood handle.

2-in-1 design for convenience, cut drywall and plane edges with 1 tool; Jab saw with triple ground teeth for fast cutting; stainless steel rasp for material removal; locking mechanism locks blade in open and close positions; compact storage, both blades folds into handle; ergonomic bi-material handle for extra comfort; Blade length: Jab - 5-1/4", Rasp - 4"; Points per inch: 9; Teeth per inch: 8.

Composite coating protects the blade with 2x more rust protection, 6x more abrasion protection, and 50 percent less friction. Blade is 15 percent thicker,uses three cutting surfaces to cut 50 percent faster and the induction hardened teeth stay sharp up to five times longer. The back of saw can be used to mark 45 degree and 90 degree angles; thick, ergonomically designed grip resists slipping and adds comfort.

Advanced twist on the classic hacksaw design; blade cuts at both 45 and 90 degree angles for clean and effortless flush cuts; high tension locking system holds the blade firmly in place and helps prevent twisting; low profile design allows easy cuts in the tightest of spaces; long reach blade offers extended cutting capability and front handle design transforms instantly into a high performance jab saw.

Used to flush cut dowels or fine detail cut such as work around windows and door frames. Pull stroke action eliminates binding and facilitates a straight cut. Induction hardened teeth stay sharp longer; quick release button for blade replacement.

Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.

Quick cam clamp holds work for accuracy and smooth, accurate cuts in wood. Simple angle adjustment for most applications. Includes: 22" backsaw with induction-hardened teeth and slip resistant grip.

A specialized type of hand saw that features flexible blades that allow it to lay flat on a surface while cutting without damage to the surface below; classic flush cut design that cuts on the pull stroke so it can cut quickly while leaving a clean edge free of chips and burrs; the blade is double-sided so one can cut from either the left or right side of the material and the comfortable handle design will offer all the control one needs to cut once every time.

Blade is 15 percent thicker; uses three cutting surfaces to cut; induction hardened teeth; back of saw can be used to mark 45 and 90 degree angles; thick, ergonomically designed grip resists slipping and adds comfort.

Solid, one piece bi-material handle with heavy duty screws to secure blade to handle assembly. Used for precise cutting including dovetails, miters, and tenons and specifically for fine finish, plywood and hardwoods. Induction heat treated, triple ground blade.

Handle is made with glass filled, high strength nylon to support six different blade positions. Turn knob lets user store all three blades, switch blades, and tilt each blade. No tools required for blade change. Multiple position handle allows access to tight corners. Includes (3) blades: 10" universal blade cuts on the pull stroke, 8" compass saw blade and 6" metal cutting blade, weighs .655 lbs.

Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.

Unique tooth geometry which features a 3 sided edge design. The teeth are induction hardened, so they will hold their edge longer and resist damage that could occur when contacting nails and staples embedded in wood; also has a low friction ToughCoat blade coating that keeps the saw cutting smoothly through the material with less binding and the rigid aluminum handle helps you stay on your line.

Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.

Molybdenum alloy tool steel edge with flexible high carbon steel backing. High tooth hardness and shock resistance.

Easy start with 12pt. extra-fine front teeth, thick-body blade delivers rigidity and control and tapered pitch nose improves clearance and stability. M2 tooth technology, advanced tooth geometry and tri-ground teeth provide a fast, efficient cut. Deep gullets provide rapid removal of chips.

Bi-metal construction allows blades to bend and flex without breaking.

Wide body reversible flush cut blade used to flush cut door jambs and millwork for tile installation/prep. Spring loaded pin enables blade to reverse for left or right cutting. Ergonomic ProTouch handle.

Honeycomb base and cam pins secure work for accurate cuts, 14-inch back saw and a built in measuring scale. Cuts miters on 45-degree and 90-degree, 22-1/2-degree angle and 45-degree face angle. Molded-in storage compartments to hold cam pins and pencil, base and pins are molded of high impact resistant material. Holds up to a 5" wide board.

Handle covers blade to protect hands. Ergonomic grip with thumb rest for maximum comfort. High-impact polymer coating increases strength and durability, 45 percent more cutting depth, 10" carbon steel blade included.

New ergonomically designed cushion grip handle for comfort. Hardened tempered blade provides clean, controlled cutting action.

Hardwood handle and (3) hardened, tempered blades provides clean, controllable cutting action; made of highest grade high carbon steel; frame depth is 6-3/4".

Fully adjustable tension, holds blade up to 32,000 PSI, blade storage in frame. Quick-release, blade-changing mechanism, tension guide on handle lever, 3-7/8" throat depth. Hacksaw or reciprocating blades extended out nose of frame can be locked into place for tight clearance work.