Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.

Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.

Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness 3/4 in. #6 x 1-1/4 in sheet metal screw. Accommodates loads to 30 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications -Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.

Midwest Fastener Conical Anchor, 5/16 in Dia, Thread Size: #14-16, 1-1/2 in L, Plastic, Suitable for: #14 x 1-1/2 in Screw

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion-resistance. ANSI drill bit required.

Midwest Fastener Conical Anchor, 3/16 in Dia, Thread Size: #8-10, 7/8 in L, Plastic, Suitable for: #8 x 1 in Screw

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.

Midwest Fastener Conical Anchor with Screw, Thread Size: #10-12, 1 in L, Plastic

Midwest Fastener Conical Anchor with Screw, Thread Size: #6-8, 3/4 in L, Plastic

Midwest Fastener Conical Anchor with Screw, Thread Size: #8-10, 7/8 in L, Plastic

Midwest Fastener Conical Anchor with Screw, Thread Size: #14-16, 1-1/2 in L, Plastic

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion-resistance. ANSI drill bit required.

Midwest Fastener Conical Anchor, 1/4 in Dia, Thread Size: #10-12, 1 in L, Plastic, Suitable for: #10 x 1-1/4 in Screw

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.

Midwest Fastener Wall Anchor with Screw, Thread Size: #8, 1-1/4 in L, Plastic

Midwest Fastener Hollow Wall Anchor with Screw, Thread Size: #6, 1 in L, Plastic

Midwest Fastener Wall Anchor, Zinc

Simply taps into drywall, no pre-drilling, vibration resistant.

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion-resistance. ANSI drill bit required.

Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.

Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.

For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.

Midwest Fastener Toggle Bolt with Wing, 1/8 in Dia, Drill Size: 3/8 in, Head Type: Round, 2 in L, Zinc

For fastening applications in concrete, block and brick. For brackets, drywall track, gutters and down spouts, electrical boxes.

Midwest Fastener Toggle Bolt with Wing, 1/8 in Diameter, 3/8 in Drill, Round Head, 3 in Length, Zinc

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion-resistance. ANSI drill bit required.

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion-resistance. ANSI drill bit required.

Secure attachment to concrete, block and brick. One-piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion-resistance. ANSI drill bit required.

For fastening applications in solid concrete. Contractor-grade anchors. Internally threaded. For overhead applications, transformers and meters, ceiling fans, electrical light fixtures.

TruBolt? wedge anchors offer maximum strength and ultimate flexibility making them the PRO choice for heavy-duty anchoring. This wedge anchor features a high-strength body that is built to resist tension and shear loads and it is code approved for use in uncracked concrete per ICC-ES ESR-2251. Not only is TruBolt? code recognized, but this wedge anchor offers a full line of diameter options and a variety of lengths. For additional application versatility, TruBolt? wedge anchors are fully threaded to accommodate a greater range of fixture thicknesses. The wedge anchor's stainless steel clip provides extended corrosion resistance to ensure the long term integrity of connections.