Replacement bulbs for ML901, ML902 (688.3698), ML903, run time is 5.8 hours.

Spindle lock for manual use if desired and for greater control when starting and finishing screws. Forward/reverse slide switch for easy screwdriving and screw removal. Rubber grips provide comfort and control. Narrow nose piece for extended reach in tight places. Specs: 130 RPM, 20 in/lbs of torque

Xenon bulb supplies 281 lumens.

Xenon bulb supplies 281 lumens.

Xenon bulb supplies 281 lumens.

Replacement switch for Skil wormdrive models SHD77 (SKU #464.0025), and SHD77M (SKU #888.9016).

Ultra thin kerf cordless saw blades are specifically engineered to optimize the cutting performance of all DeWalt 5-3/8" and 6-1/2" cordless saws. For cutting aluminum extrusions, brass, copper and other nonferrous metals. Flush ground teeth, +3 degree hook angle, .059" kerf.

Replacement cord for 120 volt skil circular saws. Heavy-duty with a 3-prong plug. 15 amp, 120 volt capacity. 8' cord.

An inline grip and compact design makes this 4 volt Max cordless rechargeable screwdriver ideal for tackling a variety of household tasks. Comfortable to use and fits in tight spaces. 180 rpms and 35 in-lbs of torque provide plenty of power for a variety of applications.

Three wire grounded 8 foot cord for fast field replacement of a damaged cord. Made of premium grade Hi-Flex wire the cord is quickly removed and attached to Milwaukee tools with the 'Quik-Lok'cord feature. 5-15P NEMA type plug. 18 gauge; 10 A; 125 volts, 1250 W; Type S cord for Milwaukee tools with grounded 'Quick Lock' cords only.

Replacement die nibbler for Orgill sku (864.7257). Designed to make clean and precise work in the keystone plate, deck plate and other corrugated sheet materials. Die rotates 360 degrees.

Electronic variable speed and variable-speed trigger cuts wood, metal and plastics, tool free blade change accepts both u and t shank blades, sightline channel improves visibility of cut line, on board blade storage quickly access stored blades, beveling shoe allows for angled cuts in both directions.. Specs: strokes/min 0-3,000SPM, stroke length is 11/16", keyless blade clamp. Includes: (1) wood cutting blade.

Tool free blade change for fast and easy change of blades. Variable speed allows for precision performance that's right for each job. Compact design maximizes user control for access in tight spaces. Includes 1 standard wood jig blade (T-shank). 0.5'' stroke length.

Extended reach screwdriver allows for reaching in tight spots. 4 volt lithium 1.5 Ahr battery. 36 in lbs of torque. LED light. Forward and reverse switch. Includes 6 bit tips and a 5 hour charger. Weighs only 1.1 lbs.

Maintenance mode, fast charging feature, multi-voltage charging lets you charge multiple slide-pack batteries up to 18V with one charger. Fast charging feature recharges slide-pack batteries in ninety minutes or less. Charges all FireStorm and Black and Decker spring-loaded style batteries 9.6V through 18V.

Powered USB port charges cell phones, mp3 players, digital cameras and other portable electronic devices. Compatible with M18 Compact and XC batteries. Also compatible with M12 Heated Jackets with the expandable battery pocket.

Tool less guard adjustment, heavy duty metal gear housing for added durability, compact grip design for comfort and control. Specs: 120V, 4-1/2" cut-off disc, no load RPM: 11,000. Includes: (1) metal grinding wheel, side assist handle, spanner wrench.

Mid-handle design for balance and control. Fan-cooled motor extends drill life. Lithium battery is integrated into the drill. Specs: 60 in-lbs torque, 550 rpm, and weighs 2.77 lbs. Includes charger and double ended bit.

For use with the entire line of Dewalt 7.2 Volt tools except for Univolt tools..

Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high speeds. Specs: 6 ft. cord length, max. hole diameter in: hardwood- 3/8"; softwood- 3/4", 120V-50-60Hz, 2,600 no load speed, and weighs 3.2 lbs. Includes carrying bag.

Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. Specs: 0-1,500 rpm, capacity in: steel- 3/8", wood- 1". Includes one double ended screwdriving bit and storage bag..

Compact size maximizes user control, multipurpose used for material removal and surface preparation, filtered dust collection, soft grip body, dust sealed switch. Specs: orbits/min 6,000 OPM. Includes: paper punch, (1) sheet sandpaper.

Pressure control technology warns user when excessive pressure is applied, random orbit action for faster stock removal, pad brake creates a gouge-free finish, and micro filtration captures and contains fine dust particles, clear view dust canister, built in vacuum port. Specs: 120V/50-60 Hz, no load OPM 12,500, 5" pad. Includes: sander, clear view dust canister, (3) sandpaper sheets.

Metal gear case for durability and longer life, convenient slide switch for easier use, two Position side handle provides added comfort and control, spindle lock for easy accessory changes, contoured body grip for added comfort and control. Specs: 10000 RPM, spindle size 5/8"-11. Includes: metal grinding wheel, spanner wrench.

Two finger variable speed adjusts for clean or fast cuts, Quick change open foot design improves visibility of cut line, dust blower keeps cut line clear. Tool-less blade change accepts both T and U shank blades. Specs: 120V, cutting capacity in: hard wood-1 1/4", soft wood-2", aluminum-3/8", mild steel-3/16", depth of cut at: 45 deg.-1-1/2", 90 deg.-2", max. bevel cut-45 deg., no load - 800-3,250SPM, 6ft cord length, weighs-3.5lbs. Includes: (1) blade.

Provides up to 500 recharges, spring-loaded. For use with all spring-loaded battery style FireStorm and Black and Decker products.

Aluminum base for exact flatness and long lasting durability, spring loaded paper clamps secure all types of paper, sealed rocker switch resists wear, soft grip handle. Specs: 120V/60Hz, no-load speed 12000 OPM, Base size is 4"x4-5/16", orbital diameter 1/16", weight 3.3 lbs. Includes: 10 ft. cord, (1) dust box, (1) dust extraction adapter, (3) sanding paper, (1) punch.

Cast metal gear case increases jobsite durability and tool longevity, Tool-free change guard provides fast and easy guard removal. Spindle lock feature allows for single wrench bit changes. 3-position side handle allows greater control in multiple positions. Specs: 11,000 rpm, 5/8" x 11" spindle and weighs 4.1 lbs. Includes slide switch with lock-on, side handle, grinding wheel, wrench and wheel guard.

Random orbit action for a fast, high quality finish, two handle for comfortable and ease of use, 10 ft cord. Specs: orbits/min - 4,400 OPM.  Includes: waxer/polisher, (1) foam applicator bonnet, (2) wool polishing bonnets.

For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.