Blue bone knives have stainless steel blades that get the job done and their classic blue handles look even better the longer you carry them. The Trapper gets its name from the consumer it was designed for. Because of its basic trapping and skinning blades and its lightweight, it is a must-have knife for those who trap small game. It is a jack knife with two full-length blades; a slender clip and a long spey. The clip blade is commonly used as a multi-purpose blade and preferred for detail work while the spey blade is commonly used as an all-purpose utility blade. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

This fishing knife is the ideal companion for taking along for adventures on the lake, river or ocean. This folding knife includes a long clip blade and scaler with hook disgorger and hook sharpening stone. The long clip blade is commonly used as a multi-purpose blade and preferred for detail work. The fish scaler blade is a special serrated design that allows ease in scaling fish. The edge is not too sharp allowing the blade to get under the fish scales and flake them off without cutting into the skin. The hook disgorger on the tip of the fish scaler blade is used to remove the hook from the fish's moth allowing for more control and safety than one would with using their fingers. The hook sharpener is a special feature only found on the fishing knife that is ideal for sharpening hooks on the go. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance. This pocket knife is ideal for fishing and outdoors.

The mini CopperLock? is smaller than the traditional CopperLock? without compromising durability. With a fully locking clip blade, this mini CopperLock? knife has the cutting power of a lockback, with the look and feel of a traditional CASE pocket knife. The clip blade is commonly used as a multi-purpose blade that makes this pocket knife great for everyday use. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

Features a large blade, small blade, can opener with small screwdriver, bottle opener with large screwdriver and wire stripper. Includes scissors, wood saw, reamer with sewing eye, corkscrew, hook, toothpick, tweezers and key ring.

Features a large blade, small blade, can opener with small screwdriver, bottle opener with large screwdriver and wire stripper, scissors, pliers with wire cutter, wood saw, fish scaler with hook disgorger and ruler, metal saw with metal file and nail file, magnifying glass, reamer with sewing eye, Phillips screwdriver and corkscrew.

Features a large blade, small blade, can opener with small screwdriver and bottle opener with large screwdriver and wire stripper. Includes scissors, pliers with wire cutter, reamer with sewing eye, Phillips screwdriver, hook, toothpick, tweezers and key ring.

Features a small blade, scissors, nail file with screwdriver tip, toothpick, tweezers and key ring. 2-1/4 in closed.

Features a small blade, scissors, retractable ball point pen, nail file with nail cleaner, emergency blade orange peeler blade with scraper, bottle opener with magnetic Phillips screwdriver tip and wire stripper, ruler with screwdriver, cuticle pusher, tweezers and key ring.

This genuine leather sheath is an essential accessory to any small size pocket knife. Great for protecting and storing your pocket knife for quick and easy access. The genuine leather belt sheath is stamped with the job CASE logo. Comes packaged in a poly bag with zip lock. Proudly made in the USA.

Sharpen knives (even serrated knives), cleavers, axes, machetes and many other cutting tools in about 10 secs. The large, ergonomic handle fits either hand and the full-length finger guard safely protects your fingers. The sharpening blades are diamond-honed tungsten carbide and provide years of reliable use.

Constructed with a locking blade, this knife is a blend of a fixed blade knife and a traditional pocket folder. The locking mechanism locks the blade when opening blade all the way. Push the tumbler located at the top of the handle to release the locking mechanism and close the knife. This pocket knife features a locking drop point blade and a convenient lanyard hole at the bottom of the handle. The drop point blade is commonly used as a general work knife and can be used for tasks such as cutting and carving. This blade is very strong and versatile. The slim design allows for an easy fit in a pocket or purse. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

Peanut knives get their name due to their small petite size, fitting discretely and conveniently in a pocket. This durable folding knife two full-length blades, The clip blade and the pen blade. The clip blade is commonly used as a multi-purpose blade and preferred for detail work while the pen blade is great for light work. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

The Trapper gets its name from the consumer it was designed for. Because of its basic trapping and skinning blades and its lightweight, it is a must-have knife for those who trap small game. It is a jack knife with two full-length blades; a slender clip and a long spey. The clip blade is commonly used as a multi-purpose blade and preferred for detail work while the spey blade is commonly used as an all-purpose utility blade. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

The Canoe knife get its name from its canoe-like shaped handle. This durable folding knife features two blades on opposing ends, the spear blade and the pen blade. The spear blade is used as a heavy-duty utility tool and great for piercing. The pen blade is great for light work and good for sharpening. The Canoe knife can be used for fishing related jobs like cutting hooks off lines, cleaning fish and cutting through finishing line easily. This knife is constructed with our chrome vanadium (CV) steel. Some knife lovers will settle for nothing less than chrome vanadium blades, since this special formula of alloyed steel is the "original" CASE blade steel. CASE chrome vanadium blades are known for their edge-holding ability and easy resharpening. However, they are less resistant to rusting, pitting and discoloration than stainless steel.

Stockman packs three blades in a convenient but very practical pocket knife. The clip and sheepfoot blade sit on the pocket end while the pen blade sits on the cap end. The clip blade is commonly used as a multi-purpose blade and preferred for detail work. The sheepfoot blade allows for added strength at the point making it great for carving and achieving a clean cut. The pen blade is great for light work. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

Constructed with a locking blade, this knife is a blend of a fixed blade knife and a traditional pocket folder. The locking mechanism locks the blade when opening blade all the way. Push the tumbler located at the top of the handle to release the locking mechanism and close the knife. This pocket knife features a locking drop point blade. The drop point blade is commonly used as a general work knife and can be used for tasks such as cutting and carving. This blade is very strong and versatile. The slim design allows for an easy fit in a pocket or purse. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

The distinctive yellow handle brightens this family while maintaining its toughness, making it one of the most beloved in the CASE line. Peanut knives get their name due to their small petite size, fitting discretely and conveniently in a pocket. This durable folding knife two full-length blades, the clip blade and the pen blade. The clip blade is commonly used as a multi-purpose blade and preferred for detail work while the pen blade is great for light work. This knife is constructed with our chrome vanadium (CV) steel. Some knife lovers will settle for nothing less than chrome vanadium blades, since this special formula of alloyed steel is the "original" CASE blade steel. CASE chrome vanadium blades are known for their edge-holding ability and easy resharpening. However, they are less resistant to rusting, pitting and discoloration than stainless steel.

This genuine leather sheath is an essential accessory to any small size pocket knife. Great for protecting and storing your pocket knife for quick and easy access. The genuine leather belt sheath is stamped with the job CASE logo. Comes packaged in a poly bag with zip lock. Proudly made in the USA.

Rose wood handle with stainless steel lock back blade. Includes leather sheath.

Blue bone knives have stainless steel blades that get the job done and their classic blue handles look even better the longer you carry them. Stockman's pack three blades in a convenient but very practical pocket knife. The clip and sheepfoot blade sit on the pocket end while the pen blade sits on the cap end. The clip blade is commonly used as a multi-purpose blade and preferred for detail work. The sheepfoot blade allows for added strength at the point making it great for carving and achieving a clean cut. The pen blade is great for light work. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

Blue bone knives have stainless steel blades that get the job done and their classic blue handles look even better the longer you carry them. The CopperLock? knife is an original design by W.R. CASE that combines elements from the Trapper and Copperhead to make a new lockback knife. The mini CopperLock? is smaller than the traditional CopperLock? without compromising durability. With a fully locking clip blade, this mini CopperLock? knife has the cutting power of a lockback, with the look and feel of a traditional CASE pocket knife. The clip blade is commonly used as a multi-purpose blade that makes this pocket knife great for everyday use. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

Smith's Knife and Scissors Sharpener

Smith's 2-step knife sharpener features two tungsten carbide blades with pre-set angles to ensure the ideal edge every time. Three or four strokes through the carbide sharpening slots will restore the edge on a very dull knife. The two crossed ceramic rods also have pre-set angles and provide a smooth finished edge to already sharp knives. It is lightweight, portable, comes with a lanyard hole and has non-slip rubber feet for added safety. Excellent for use on all types of knives, especially filet knives.

Desert ironwood handle with stainless steel blade.

Features a small blade, scissors, nail file with screwdriver tip, toothpick, tweezers and key ring. 2-1/4 in closed.

Delrin handle with stainless steel blades.

Blue bone knives have stainless steel blades that get the job done and their classic blue handles look even better the longer you carry them. Smaller version of the Medium Texas toothpick, features a long clip blade and has a small design that fits well into pockets or purses. The clip blade is commonly used as a multi-purpose blade and preferred for detail work. This knife is constructed with CASE Tru-Sharp? stainless steel which is a special high-carbon steel that helps the blades hold an edge longer than conventional steel. It also offers extraordinary blade strength and corrosion resistance.

Features a large blade, small blade, can opener with small screwdriver, bottle opener with large screwdriver and stripper, toothpick, tweezers and key ring.

Smith's new "Pocket Pal" multi-functional knife sharpener features pre-set crossed carbides and ceramic stones, which provide the ideal edge every time. Carbides provide quick edge setting and the specially shaped ceramic stones are designed to give you a razor sharp edge on either standard or serrated edges. A fold out, tapered round, diamond coated rod is designed for sharpening serrations and small gut hooks. Unit is compact, lightweight, durable and comes with a lanyard hole.

Lightweight, versatile and convenient. Combines the strength and control of a fixed blade with the portability of a folding knife. Durable and easy to handle. Drop point blade. Black zytel handle. Made in the USA.