N 6566 is a pocket door guide for 1-3/8 in THK doors. It is a universal fit used by many pocket door manufacturers. Made of stamped steel with nylon guide tips, it mounts onto the bottom of the pocket door opening and under the trim. It keeps the door from hitting side to side as it slides back and forth.

N 7015 is a set of left and right hand nylon pocket door guides that can be used for any thickness door. It is a universal fit used by many pocket door manufacturers that is screwed onto the jamb under the trim. It has slotted holes for adjustment in or out. It keeps the door from hitting side to side as it slides back and forth.

This Prime-Line N 7410 bi-fold door Roller Assembly is constructed of a steel bracket and steel ball bearings with plastic rollers, It is commonly used on pocket door and by-pass sliding door systems, The bracket's mounting base measures 2-7/16 in, x 1 in and it features four parallel wheels that are spaced apart at 7/8 in, on center, The wheels are constructed of durable plastic, which provide for a smooth, long-lasting, quiet operation and they feature 7/8 in Dia convex (round) edges, These adjustable roller assemblies mount on-the tops of pocket doors and they are used by many pocket door manufacturers, This roller assembly fits into a 1-5/16 in W track (inside dimension, wall-to-wall).

N 6724 is a four roller pocket door roller assembly used on Kennaframe pocket doors and others. The four 23/32 in Dia nylon rollers are affixed to an adjustable spring loaded steel bracket. They ride in a double track mounted in the top of the pocket door opening. It has a dial-adjust wheel that makes it adjustable up to 3/8 in height. It can be used on pocket doors 1 in to 1-3/4 in thick and up to 100 lb. each.

Heavy-duty hangers with 3 ball bearing equipped wheels for long, trouble free service - never needs lubrication. Height adjustable. 200 lb weight capacity. 1 x 3 in plate size.

Size of 3-7/8 in x 3/4 in x 1-5/8 in. Slim pak, polybagged.

N 7065 is a pocket door roller assembly used on Kennaframe, Crawford, Press-Rite and many other bi-fold door manufacturers. It is constructed of a nylon housing with 2 parallel 13/16 in ball bearing nylon rollers which provide for a smooth and quiet operation. This roller rides in a double "J" track and affixes to a stamped steel mounting bracket that clamps it into place after being adjusted to the correct height. This pocket door roller assembly is good for doors up to 100 lb.

This is a top centered mounted tricycle style roller that is adjustable. The three 1 in flat durable nylon rollers provide a smooth and long-lasting, quiet operation. They are attached to a stamped steel and nylon carriage mounted on top of a steel threaded steel rod. The threaded rod catches into a bracket that locks it firmly into place.