Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > AIR COMPRESSORS
Sort By:
1
Senco PC1010 Air Compressor Porter-Cable C2002 Air Compressor Stanley-Bostitch BTFP02011 Air Compressors
The PC1010 is ultra-quiet and ultra-light lube less pump compressor. Our 150 psi 6 gal oil-free pancake compressor is constructed with a pancake style tank for stability, with a water drain valve and tough rubber feet. The high-pressure design optimizes air tool performance, delivering 2.6 scfm at 90 psi for quick recovery time. The oil-free pump provides maintenance-free performance. Transporting is easy with the integrated cord wrap. This portable, lightweight pancake compressor has a an oil-free, maintenance-free pump that delivers 2.6 scfm at 90 psi and a maximum tank storage pressure of 150 psi. The 78.5 dBA rating is ideal for a quiet work environment.
Senco PC1010N Air Compressors Senco PC1280 Air Compressors Senco PC0968 Air Compressor
Senco's 1 gal finish and trim air compressor is designed with the professional contractor in mind. The lightweight and compact design ensure easy portability combined with the ultra-quiet operation makes this the ideal finish and D6 trim unit. The long life induction motor and oil-free pump design eliminate the need for oil or regular maintenance. Senco's 6 gal pancake air compressor is designed with the power and speed to handle all finish and trim applications. The compact, lightweight and balanced design allows for easy portability. The oil-free pump allows for maintenance-free operation. Designed with the power and speed to handle all finish and trim applications. The PC0968 comes with an oil-less pump and weighing in at only 38 lb this compressor will not wear you down.
COMPRESSOR AIR ELEC 1/2HP 1GAL Senco PC1131 Air Compressor COMPRESSOR CMPCT M18 FUEL 2GAL
Compressors are workhorse tools on the jobsite and in the work shop. Makita? air compressors are favorites for their faster recovery time, lower noise, longer tool life and consistent performance. The Makita? 1/2 hp 1 gal compact, oil-free, electric air compressor (MAC100Q) features a QUIET series design, combining strong performance with lower noise. At only 58 dBA, it's ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC100Q runs at a lower rpm, resulting in longer motor and pump life. It is powered by an efficient 1/2 hp induction motor that provides up to 135 psi. It also features a lightweight design (only 25.5 lb) for increased portability. The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage and on the jobsite. Additional features include a low-amp draw that reduces the incidents of tripped breakers at start-up, as well as an oil-free dual-piston pump designed for maintenance-free operation. Senco's PC1131 workhorse compressor generates 4.4 cfm which provides power for all types of applications, from finish to framing. The oil splash design and induction motor provides the durability expected for professional contractors. Our M18 FUEL? 2 gal compact quiet compressor is designed for the professional carpenter and remodeler. This quiet air compressor is only 68 dBA, making it the quietest cordless compressor on the market and quieter than most corded options. We've designed this 2 gal air compressor to be high performing while reducing the noise professionals deal with on jobsites. Its low-profile and stackable design allow our portable air compressor to be easily stored and transported on, around and back off the jobsite. It has run time professionals need to stay productive, giving you up to 1600 18 ga brad nails per charge. It is compatible with all Milwaukee? M18? REDLITHIUM? batteries making it easy to swap packs and keep running to finish your job.
Stanley CAP2040ST-OL Air Compressor COMPRESSOR AIR ELE1-1/2HP 3GAL COMPRESSOR AIR 2.5 HP
COMPRESR AIR 4GAL SIDESTACK
Your Price: $399.99
Compact design was engineered to be more maneuverable and convenient to carry. It offers enough air flow to operate two framing nailers or three roofing nailers simultaneously. Four oversized rubber feet to help minimize vibration. Durable ball type drain valve. Roll bar handle protects the oil site glass and other gauges against damage if the unit accidentally tips or rolls over. Upgraded industrial-grade pressure switch/regulator makes for easy adjustments and increased durability. Oil-lubricated pump offers a cast iron cylinder for durable performance over extended periods of use.  Specs: 3 horsepower (peak) induction motor, this unit draws only 13.8 amps (120 volts) to prevent circuit breakers from flipping as the motor cuts in and out. Four-gallon stack tank compressor providing 4 CFM at 90 psi and a maximum operating pressure of 135 psi. Compressors are workhorse tools on the jobsite and in the work shop. Makita? air compressors are favorites for their faster recovery time, lower noise, longer tool life and consistent performance. The Makita? QUIET series 1-1/2 hp, 3 gal, oil-free, electric air compressor (MAC320Q) features a QUIET series design, combining strong performance with lower noise. At only 60 dBA, it's ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC320Q runs at a lower rpm, resulting in longer motor and pump life. It is powered by an efficient 1-1/2 hp induction motor that provides up to 90 psi. It also features a lightweight design (only 52.5 lb) for increased portability. The roll-cage construction provides added protection for the pump and motor assembly during transportation, in storage, and on the jobsite. Additional features include a low-amp draw that reduces the incidents of tripped breakers at start-up, an oil-free dual-piston pump designed for maintenance-free operation, and hooks for convenient AC power cord storage. Makita's 2.5 hp air compressor is equipped with Makita's Big Bore? engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC2400 delivers industrial power and results with improved durability for tough jobsite conditions. The MAC2400 is powered by a 2.5 hp motor. The Makita Big Bore? engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough jobsite conditions. The MAC2400 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The Big Bore? oil-lubricated pump is also more efficient and the MAC2400 runs cooler and at half the rpm of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gal twin-stacked tank sustains an operating pressure of 130 psi and delivers 40 psi (4.8 cfm) and 90 psi (4.2 cfm), enough for two nailers. The low-amp draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure. The roll bar handle provides portability and additional protection, helping it withstand harsh jobsite environments. Additional features include a convenient oil drain and oil sight glass, a tank drain valve that supersedes standard petcock design for easier maintenance and finned discharge tubing that dissipates heat more efficiently. The MAC2400 is engineered for low noise, high output and less maintenance and delivers industrial power and results with improved durability under tough jobsite conditions.
COMPRESSOR AIR 3.0 HP COMPRESSOR 2HP 125PSI S-STACK
Makita's 3 hp air compressor is equipped with Makita's Big Bore? engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport. The MAC5200 is powered by a 3 hp motor with built-in thermal overload for additional protection. The Makita Big Bore? engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough jobsite conditions. The MAC5200 has an oil-lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. The 5.2 gal tank sustains an operating pressure of 140 psi and delivers 40 psi (6.9 cfm) and 90 psi (6.5 cfm), enough for two nailers. The oil-lubricated pump runs cooler and the finned discharge tubing dissipates heat more efficiently. The roll-cage construction is built for extra protection for the pump and motor assembly, helping it withstand harsh jobsite environments. Ease-of-use and convenience features include tool hangers, a built-in storage compartment for air fittings and accessories and an air hose wrap to store 50 ft of 3/8 in air hose with handle folded or upright. Other features include a convenient oil drain and oil sight glass and a tank drain valve that supersedes standard petcock design for easier maintenance. "5.0 CFM at 90 psi. 125 max psi. 2.0 (Peak) horsepower. 49 dB @25 ft. 5 gallon air tank capacity. Dimensions: 28.35""L x 20.08""W x 20.08""H. Weighs 86.3 lbs."
   
 
1