|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shorter length great for shallow walls. White color blends with white walls. Non-conductive/non-corroding nylon. Maximum fixture thickness 3/4 in #8 x 1-1/4 in sheet metal screw. Accommodates loads to 75 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
Starts easier than other self-drilling drywall anchors. No pre-drilling required; can accommodate #6 to #8 Dia screws of any length. Up to 50 lb load capacity. Drills directly into drywall or wood studs. Zinc die-cast design for maximum durability. A superior alternative to traditional plastic plugs and mollies. Installs quickly and easily with a #2 Phillips or cordless screwdriver. #7 x 1-1/4 in sheet metal screw; Maximum fixture thickness - 3/4 in. Removable. Applications - closet organizers, electrical fixtures, curtain rods, HVAC fixtures, plumbing fixtures, light shelving and supports, Signs.
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
Shorter length great for shallow walls. White color blends with white walls. Non-conducive/non-corroding nylon. Maximum fixture thickness 3/4 in. #6 x 1-1/4 in sheet metal screw. Accommodates loads to 30 lb. Drills directly into drywall. Installs quickly and easily with a #2 Phillips or cordless screwdriver; removable and reusable. Applications -Smoke detectors, clocks, bathroom accessories, thermostats, plaques and awards, decorative wall hangings, picture frames, coat racks.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
The WallDriller? is designed to offer the maximum holding power in drywall material. Its fine centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring maximum holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
Rawlplug Rawl Uno Multi-Purpose Anchor, Thread Type: Twin, 1-1/4 in L, Polypropylene
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rawlplug Rawl Uno Multi-Purpose Anchor, Thread Type: Twin, 1 in L, Polypropylene
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The WallDriller PLUS?, 2X stronger than our 1st generation, is designed with three expandable legs that grip tightly behind the drywall for maximum holding power. Its fine-centered point helps guide the anchor into the wall with flawless precision. A sharp profile thread cuts deeply into the hole without damaging the drywall, ensuring excellent holding power and stability. The sharp cutting edge reduces the force required to cut the material, making it a self-drilling anchor without pre-drilling. Available sizes - #6 (3.5 mm), #8 (4 mm), #10 (5 mm) and #12 (6 mm).
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
Rawlplug Rawl Uno Multi-Purpose Anchor, 1/4 in Dia, Thread Type: Twin, 1-1/4 in L, Polypropylene/Timber
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rawlplug Rawl Uno Multi-Purpose Anchor, 3/16 in Dia, Thread Type: Twin, 1 in L, Polypropylene/Timber
|
Rawlplug Rawl Uno Multi-Purpose Anchor, Screw Size: #6, Thread Type: Twin, Thread Size: 13 mm, 1 in L, Polypropylene
|
The TripleGrip? is one of the most technologically advanced anchor on the market. It is designed with two expandable wings that grip tightly behind the drywall for a maximum holding power. Its advanced cam-action technology expands; thereby creating an additional pressure against the side walls of the drywall or masonry. This also provides more stability and strength. Two lateral wings hold the anchor in place, preventing any rotation while the screw is inserted.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simply taps into drywall, no pre-drilling, vibration resistant.
|
Rawlplug Rawl Uno Multi-Purpose Anchor, 1/4 in Dia, Screw Size: #8, Thread Type: Twin, Thread Size: 16 mm, 1-1/4 in L, Polypropylene/Timber
|
Truly universal plug which fixes into any base material, solid or hollow.
|
|
|
