Home > HARDWARE > WINDOW & DOOR HARDWARE > DOOR ACCESSORIES > DOOR CLOSERS
Sort By:
1
DOOR HOLDER KD 4IN CAST ALUM National Hardware V528 Hinge Pin Closer CLOSER SPRING DOOR WHITE
Kick down door holder with 4 hole backplate. rectangular base secures to door. Replaceable rubber tip for non-marring grip on floor surface. 4 in L. National Hardware V528 Hinge Pin Door Closer, Automatic/Manual: Automatic, Aluminum/Steel, Brass, 0.94 in W, 5-1/2 in H, Wall Mounting These safety spring-activated door closers are constructed of diecast materials and come in a white painted finish. They are U.L. listed with a 1/2 hr fire rating and can be used to close doors weighing up to 150 lb. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy-to-install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method and they do not have a hold open feature. Distance of travel- The closer arm of this safety spring closer has the ability to swing a full 180 deg, but once it is mounted in place, the door's distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. For a rust and weather-resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include- black, brown, chrome-plated and satin chrome plated. Be sure to view the manufacturer's how to Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. do not overtighten, turning past 4 hole positions will cause this item to fail.
DOOR HOLDER KD 4IN CAST BRASS DOOR CLOSER RESIDENTIAL IVORY CLOSER DOOR RES SIZE 1 BROWN
Kick down door holder with 4 hole backplate. rectangular base secures to door. Replaceable rubber tip for non-marring grip on floor surface. 4 in L. Non-handed chassis and closer, size 1 only, fits doors 24 to 30 in W, weighing 30 to 65 lb. Adjustable valve closing speed. Friction hold open. Tell Manufacturing 1000 Door Closer, Arm Type: Friction Hold Open, Stainless Steel, Brown
CLOSER DOOR RES SIZE 1 IVORY CLOSER DOOR RES SIZE 3 IVORY Prosource C101-BH-SA-IV Residential Door Closer
Tell Manufacturing 1000 Door Closer, Arm Type: Friction Hold Open, Stainless Steel, Ivory Tell Manufacturing 2000 Door Closer, Arm Type: Friction Hold Open, Ivory The ProSource door closer has an aluminum die-cast body with steel arm to resist corrosion. It's steel rack and pinion is heat treated for smooth action and minimum wear. The compact size with decorative finished cover suits most interior and exterior applications. The door closer has a hold-open feature.
Prosource C101-BH-SA-BR Residential Door Closer Prosource C102-BH-SA-IV Residential Door Closer Prosource C102-BH-SA-BR Residential Door Closer
The ProSource door closer has an aluminum die-cast body with steel arm to resist corrosion. It's steel rack and pinion is heat treated for smooth action and minimum wear. The compact size with decorative finished cover suits most interior and exterior applications. The door closer has a hold-open feature. The ProSource door closer has an aluminum die-cast body with steel arm to resist corrosion. It's steel rack and pinion is heat treated for smooth action and minimum wear. The compact size with decorative finished cover suits most interior and exterior applications. The door closer has a hold-open feature. The ProSource door closer has an aluminum die-cast body with steel arm to resist corrosion. It's steel rack and pinion is heat treated for smooth action and minimum wear. The compact size with decorative finished cover suits most interior and exterior applications. The door closer has a hold-open feature.
Prosource C102-BH-SA-BRN Non-Holding Door Closer Prosource C102-BH-SA-IVN Non-Holding Door Closer CLOSER DOOR GRADE3/SIZE3 ALUM
The ProSource door closer body is constructed of cast aluminum with power size 2, built in non hold-open, plastic cover and it's a surface mount residential door closer. It Includes standard Arm. The arm opening angle is 180 deg. The ProSource door closer body is constructed of cast aluminum with power size 2, built in non hold-open, plastic cover and it's a surface mount residential door closer. It Includes standard Arm. The arm opening angle is 180 deg. Tell Manufacturing 500 Door Closer, Door Opening Type: Surface Applied, Spring Size: #1 to 4, Arm Material: Steel, Aluminum, Silver, 4-3/4 in W, 13 in D, 3-1/2 in H, Parallel Arm, Regular, Top Jamb Mounting, Includes: Fasteners
CLOSER DOOR GRADE3/SIZE3 DURO Prosource C103-BH-SA-BR Residential Door Closer CLOSER ADA APPROVED 12641 PA
Turn to Tell for seamless, fully integrated solutions for multifamily properties. Our solutions enhance the experience of residents and property managers alike, providing safety, accessibility and convenience that work for everyone. Tell access management systems and electronic and mechanical locksets offer quality, long-lasting performance that can reduce your cost of ownership while protecting residents and personal property. Interior or exterior, residence doors or common areas, perimeter or garage area, we can help you secure every opening with a product that's attractive and functional. The ProSource door closer has an aluminum die-cast body with steel arm to resist corrosion. It's steel rack and pinion is heat treated for smooth action and minimum wear. The compact size with decorative finished cover suits most interior and exterior applications. The door closer has a hold-open feature. Grade 1 surface applied closers. Complies with ANSI A156.4, Grade 1, 2 million cycles, UL/ULC listed up to 3 hr fire-rated performance. Non-handed. Tri-pack mounting - regular, top jamb and parallel arm applications. Spring power adjustable 1 to 4 and 3 to 6 sizes. Adjustable back check, hydraulic - providing cushioning and preventing uncontrolled openings of the door. Adjustable valves, independent, non-critical (sweep and latch), consistent closing speeds. Metal screws fasteners included for hollow metal and aluminum mounting applications. Wood screws included for wood door mounting applications. Thru-bolts optional. Door range up to 180 deg. Door Preparation: 9-1/16 in horizontal and 3/4 in vertical mounting hole locations (retrofits traditional closer).
CLOSER DOOR ADJ SPRG SZ1-4 BRZ CLOSER DOOR ADJ GRADE 1 MATBLK Prosource C501-AB-SA-BR Commercial Door Closer
Tell Manufacturing 600 Door Closer, Spring Size: #1 to 4/#3 to 6, Arm Material: Steel, Aluminum, Includes: Fasteners Tell Manufacturing Door Closer, Spring Size: 1 to 4, 3 to 6, Arm Material: Steel, Aluminum, Matte Black, 4-3/4 in W, 3-1/2 in H, Includes: Metal and Wood Screws The ProSource door closer has an aluminum casted body with steel arm to resist corrosion. It's steel rack and pinion is heat treated for smooth action and minimum wear. The closer is lubricated with stable hydraulic fluid for multi-climate operation. It has an adjustable back check, fits left handed or right handed installations, does not have hold-open feature and the power size is 1-4. This product is ADA compliant and it comes boxed.
Prosource C501-AB-SA-AS Commercial Door Closer CLOSER DOOR SZ1-6 ALU 12X3/4IN CLOSER DR SZ1-6 ALUM 5X2-1/4IN
The ProSource door closer has an aluminum casted body with steel arm to resist corrosion. It's steel rack and pinion is heat treated for smooth action and minimum wear. The closer is lubricated with stable hydraulic fluid for multi-climate operation. It has an adjustable back check, fits left handed or right handed installations, does not have hold-open feature and the power size is 1-4. This product is ADA compliant and it comes boxed. Tell Manufacturing 800 Door Closer, Spring Size: #1 to 6, Arm Material: Steel, Aluminum, Includes: Fasteners Tell Manufacturing 900 Door Closer, Spring Size: #1 to 6, Arm Material: Steel, Aluminum, Includes: Fasteners
   
 
1