|
|
|
|
|
|
|
|
|
|
|
|
|
|
This roller is a replacement for some Croft and Keller doors. It is also found in other household situations from the closet to the bathroom. It is a ball bearing 3/4 in high-density polyethylene roller on a threaded hex hub. Often fits onto a bracket that is attached to the door while the roller rides in an upper track above the door opening.
|
3/4 in wide die-cast keeper, screw slots allow for vertical adjustment, universal application. Contains one keeper and installation fasteners.
|
Plastic roller with narrow center groove 7/32 in W nylon wheel, concave edge. Includes a 8-32 x 3/8 in machine screw with binder post nut. Fits on air control doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1/4 in W center groove nylon wheel, high-tension 2-1/2 in L heat treated steel spring and #8 x 3/8 in Phillips pan head sheet metal screw.
|
Consists of 1/4 in W center groove wheel. Heat-treated, high-tension adjustable steel M-spring. Used by several patio door manufacturers.
|
1-1/4 in W x 3-5/8 in L, steel strike replaces most deadbolt strikes for increased security. 3/4 in x 1-1/16 in opening.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bent spring design used by Academy Mfg. And others. Center grooved 5/16 in W wheel, 2-1/4 in L x 5/16 in W flat high-tension heat treated steel spring and #8 x 3/8 in Phillips sheet metal screw.
|
Used by metal industries. Center grooved, 1/4 in W, roller. 1-3/4 in L, high-tension, heat treated steel spring. Includes #8 x 3/8 in Phillips sheet metal screw.
|
Are you having trouble sliding your screen door open or closed. Have you checked your rollers/roller assemblies. Don't replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This roller assembly with M-shaped tension spring with a 1 in Dia steel ball bearing roller is used by a variety of patio door manufacturers. The heat-treated tension spring is 2-5/16 in L and shaped like an M, giving it the tension needed by the screen door to slide properly. Order yours today and have your door slide like new.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by many patio door manufacturers. Steel ball bearing roller in adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing with 10-32 machine thread hole on top center and 1/4-20 side threads for mounting.
|
Used by Crossly and other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/16 in L x 1-1/8 in H x 11/16 to 9/16 in D die-cast housing assembly with 15/16 in flare width.
|
For sliding glass doors. Center grooved, 5/16 in W steel ball bearing roller and steel inner race with 1/4-20 x 3/4 in carriage bolt and 1/4 in - 20 hex nut.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used by several patio door manufacturers. Consists of 1/4 in W center groove wheel, high-tension heat treated steel V-spring (2 in L before and 2 in L after bend).
|
5/16 in W steel ball bearing roller, center grooved, 3/8 in W including hub, with built-in 5/8 in L x 7/32 in Dia axle.
|
Used by Air Control, Howmet, Krestmark and many other patio door manufacturers. Steel ball bearing roller and adjustable 2-5/8 in L x 1-3/8 in H x 3/4 in D steel housing assembly with machine threaded holes (10-32 top and 1/4-20 side) for installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel ball bearing roller and adjustable steel housing assembly. Fits on Nu-Air, Bennings, Scotty and many other patio door manufacturers.
|
These sliding door rollers are constructed in steel and come in a zinc-plated finish. Each roller features a 105 lb. maximum load capacity rating and concave (grooved) edges for use on raised tracks found in patio sliding doors, sliding screen doors and sliding wardrobe and Closet Doorr systems. These 1-1/2 in OD rollers are constructed with steel center races, 1/4 in ID axle holes and they are only 5/16 in THK. Rollers like these are used in a variety of patio and Closet Doorr roller assemblies. Use these rollers to replace damaged wheels, missing wheels and plastic wheels as needed.
|
This is a plain back patio door roller assembly with a 1-1/4 in concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in W and 1-1/4 in H with a flare width of 13/16 in with a rear adjusting screw. Features a 1/4-20 machine thread mounting hole on-the plain back end and a #10-32 threaded optional use hole on-the top. Used by Blomberg and a variety of other manufacturers of vinyl and metal sliding patio doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 1-1/4 in Dia concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in built-in axle hub and is 5/16 in W.
|
Steel ball bearing roller, adjustable steel housing assembly. Used by many patio door manufacturers. 2-5/8 in L, 1-1/8 in H and 3/4 in W housing dimensions. 10-32 machine thread on top and 1/4-20 machine thread on end of housing.
|
Cylinder Lock, 1-1/4 in, 5-pin tumbler lock with 2 keys, hardened break-away tailpiece. Used to keylock most surface mount handle sets. Keyway is compatible with Weiser?, Kwikset and Weslock.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Adjustable steel housing assembly, fits Acorn Door and other patio door manufacturers. 2 1/8 in L x 9/16 in W x 1 in H. 10-24 machine thread.
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
Steel housing and hook, round end face plate. Hook position is adjustable, fits on W&F. Hole center of 3-11/16 in.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tandem steel ball bearing roller; adjustable; steel housing assembly. Housing width: 3/4 in. Roller edge type: Concave. Contents: 1 roller assembly.
|
Tandem steel ball bearing rollers; adjustable steel housing assembly; housing dimensions: thickness 3/4 in; length 3-1/8 in; height 1-1/32 in. Housing width: 11/16 in. Roller edge type: Concave. Contents: 1 roller assembly.
|
Easily restore smooth and reliable operation to your patio or sliding glass door with this Prime-Line D 1607 sliding door roller tandem assembly. Designed as a replacement for worn, damaged or missing rollers, this assembly helps extend the life of your door and improve its performance. It is commonly used by a variety of patio door manufacturers, making it a versatile repair solution for homeowners and DIY installers. The roller assembly features a durable stamped steel housing with a protective yellow zinc finish that resists wear and corrosion. Inside the housing are tandem concave steel ball bearing rollers, each measuring 1-1/4 in Dia x 5/16 in THK. These rollers are engineered to provide smooth gliding action, reduce door sticking and ensure long-lasting performance. The housing measures 11/16 in W, 1-3/16 in H and 4-5/8 in L, with a minimum collapsed height of 1-1/2 in. Installation and height adjustments can be made with a standard Phillips head screwdriver, making it a straightforward project for most DIY homeowners. Whether you are repairing a sliding patio door for the first-time or maintaining an older unit, this roller assembly is designed for strength, durability and ease of installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Steel hook, nite latch feature, universal design, interchangeable, reversible hooks. 4 Hook Assortment, surface mounted latch style: Hook Style Hole Center: 6-5/8 in.
|
Die-cast construction fits most popular flush lock cutouts. Comes complete with keyed cylinder lock, reversible for left or right hand, complete with 4 different hood lengths.
|
Die-cast outside pull, inside pull with wood handle, die-cast thumb turns with steel latch activator. Includes one inside pull with thumb latch, one outside pull and installation fasteners.
|
|
|
