|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, flat edge, plastic wheel with steel ball bearings.
|
This 3/4 in tub enclosure roller is constructed from nylon. It features an oval edged design with a threaded hex hub. It comes complete with fasteners for a quick and easy installation.
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, round edge.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Threaded hex hub, die-cast zinc inner race, steel ball bearings, plastic wheel, flat edge.
|
Shower door bottom sweep with 3/4 in tee shaped tip, fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
Keep your shower door secure with this Prime-Line stainless steel shower door catch. This is a stainless steel shower door catch with a spring-loaded nylon tip. Designed to be attached to the door frame of swinging shower door and hold the door closed. Nylon latch allows for a soft but durable hold. The housing is designed to be adjustable with the elongated mounting slots which are 1 in on center.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a gray vinyl swinging shower door sweep with a Star shaped insert at the top that fits into an extrusion slot on the bottom of the door. The 1/8 in star shape inserts into a similar extruded shape in the bottom of the aluminum framed swinging shower door. The sweep projects down 1-3/16 in from the bottom of the door frame.
|
Injection molded plastic bottom guide fits 7/16 in THK door panels. Installed with double-sided tape or snaps into extrusion fin. Used by several shower door manufacturers.
|
This guide is constructed from nylon. It features snap-in tabs that hold your guide to your track. Keeps your sliding tub enclosure doors aligned. Used on enclosures manufactured by International.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 in T-shaped tip fits into extrusion slot on bottom of swinging shower door to prevent water from leaking onto floor.
|
This is a universally used gray flat style shower door sweep that is 36 in L and 1-1/2 in W and can be cut to size. It is held onto the swinging shower door by a drip rail that is located on the bottom of the door. Easy Installation, just remove the screws from the metal strip holding the old sweep and remove. cut the new sweep to size, determine how far down the sweep needs to hang and install by replacing the drip rail over it and re-installing the screws.
|
If your shower door has worn out rubber seal and leaks water onto your floor, you can replace them with the Danco Shower Door Seal. It features a durable plastic construction and will provide a positive seal to prevent water from leaking out from your shower. This shower door seal is 5/8 in width and 38 in length.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If your shower door has worn out rubber seal and leaks water onto your floor, you can replace them with the Danco Shower Door Seal for Sterling shower doors. It features a durable plastic construction and will provide a positive seal to prevent water from leaking out from your shower. This shower door seal is 3/8 in width and is 48 in length making sure you have enough seal for your shower door. This rubber seal has a specific hollow seal that works for designer pivot shower doors. This seal is the ideal piece to keep your shower door from leaking water onto your bathroom floor.
|
White plastic bottom guide acts as a panel retainer. Used by Kinkead and Sterling.
|
Prime-Line Shower Door Bottom Seal, Half-Round, Vinyl, Black, Dimensions: 36 in L x 5/32 in W x 13/16 in H
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 32 in tub or shower enclosure chrome towel bar. The diecast chrome brackets have threaded studs that insert through the glass tub and shower enclosure and are secured in place with machine screws. The 32 in long bar is 3/8 in thick and 3/4 in tall and made of extruded aluminum that is chrome-plated.
|
This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy-to-install. The door sweep for bottom of door features a 3/32 in round insert shape at its top. The 1 in height and 37 in length can be trimmed as necessary for excellent fit.
|
|
|
