|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware V211S Bracket Screw, Steel, Zinc
|
ClosetMaid Shelf End Cap, Dimensions: 1/4 in Dia x 0.4 in D, Plastic, White, Suitable for: ClosetMaid Shelf and Rod Shelving, Includes: (10) Small End Caps and (4) Large End Caps
|
Can be used as a support or brace. Strengths exceed ANSI/BHMA standards. Brackets are designed for use with standard dimensional lumber. First measurement indicates nominal width of shelf leg, second measurement denotes nominal length of wall leg. Bulk pack.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
"Accepts a 1-3/8"" diameter standard wood pole. 2-3/16""OD x 3/4"" overall. Includes one pair of pole sockets and two No.8 x 3/4"" Phillips flat head screws."
|
National Hardware MPB107 Pole Socket Set, Polypropylene, White, Suitable for: Up to 1-3/8 in Dia Pole, Includes: Fasteners
|
The U 10165 is a shelf support peg, with a 5 mm diameter. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ClosetMaid Support Bracket, 12 in Length, 2 in Width, 2 in Height, White, Steel
|
Single track adjustable wall standard. Dimensions of 5/8 in W x 24 in H x selected length. For use with ProSource shelving. UPC tagged.
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack mounting systems. The heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of the SuperSlide? shelf and hang rod.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The U 10156 is a plastic shelf support peg with a 3 mm diameter steel peg, to provide extra strength when needed. Used by many cabinet manufacturers. 10 lb maximum safe load per peg.
|
Pilasters for built-in shelving and book case applications. Adjustable on 1/2 in centers. 23 ga high-strength steel with a dimension of 5/8 in W x 3/16 in D.
|
The U 10166 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Knape & Vogt Closet Pole End Cap, Plastic
|
Use to join two shelves together to create a continuous run of shelving.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SuperSlide? shelving and hardware allows hangers to slide freely on both fixed-mount and ShelfTrack? mounting systems.
|
For use with cabinets and storage cabinets with glass shelves.
|
The U 10163 is a shelf support peg, with a 1/4 in Dia. Steel plated construction, used by many cabinet manufacturers. 25 lb maximum safe load per peg.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
U 10136 is a shelf support peg with a 1/4 in Dia. Plastic construction and used by many cabinet manufacturers. The 5 lb maximum safe load per peg.
|
Prime-Line Shelf Support Peg, Load Rating: 5 lb, Peg Diameter: 5 mm, Peg Length: 3/8 in, Plastic, Mill, Clear
|
The ClosetMaid? traditional fixed mount system is the original, economical way to install ventilated wire shelving. Wall clip attaches to the back of shelving to anchor shelf to the wall.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Use with SuperSlide? shelving to create uninterrupted sliding action even around corners for walk-in closets.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
For use with the 80 Series standards. For shelving applications in light industrial, commercial and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1 in increments. 16 ga cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
|
Heavy-duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid? shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Measures 2-7/8 in H x 2-1/8 in W x 1-3/4 in D. Made from resin.
|
|
|
