|
|
|
|
|
|
|
|
|
|
|
|
|
|
Open in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Halo Open Recessed Trim, Recessed Can Diameter: 7-1/4 in, White, 6 in Dia, Suitable for: BR, R and PAR Lamps
|
The HALO H7 series 6 in new construction recessed housing simplifies new construction recessed lighting installation with a redesigned frame and updated conduit. It includes Got Nail! hangers with pre-installed nails and auto-leveling feet, so you can easily align and secure the housing. Slide-N-Side wire traps allow for faster wiring outside of the junction box, while Pass-N-Thru hanger bars allow for tool-less shortening of bar length. This IC-rated, Air-Tite housing is compatible with standard light bulbs and HALO led lighting trims using a standard 120V E26 socket-base. Built to last and backed by a 5 year limited warranty, HALO housings are designed and tested in the USA and supported by U.S.-based customer service.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Open trim with socket support in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H750ICAT is a dedicated LED new construction housing for use with halo H7 collection 600 Series and 900 Series LED modules. The H750ICAT is designed for insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750ICAT connector system provides high efficacy code compliance when used with Halo H7 collection LED modules.
|
Halo Recessed Lighting Trim, Recessed Can Diameter: 6 in, Construction Type: Dead Front, Lens Type: Albolite, Lens Material: Glass, Body Material: Polymer, White, 8 in Dia, Suitable for: HALO and Other Housings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coilex baffle trim in the 6 in trim family for use in recessed down lighting. Compatible for use in Halo and other housings.
|
Full cone baffle-trim with self-flange in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Splay trim for use with R and PAR lamps in H5 Series housings. Dual position socket support for R and PAR lamps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Coilex? baffle trim in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H750RICAT is a dedicated LED Remodel housing for use with Halo H7 Collection 600 900 Series LED modules. The H750RICAT is designed for remodel into insulated ceilings and can be in direct contact with ceiling insulation. This AIR-TITE? housing design prevents airflow between attic and living areas and saves on both heating and air conditioning costs. The H750RICAT LED connector system provides high efficiency code compliance when used with Halo H7 Collection 600 and 900 Series LED modules.
|
Air-Tite? baffle trim with reflector 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal baffle trim for use with the H5 Series housings. Trim includes dual-position socket supports for BR, R and PAR lamps.
|
Eyeball 30 deg tilt, self-flanged in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H99TAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99TAT is designed for use in non-insulated ceiling or for insulated ceilings but insulation must be kept 3 in from all sides of the housing. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing.
|
Reflector cone in the 6 in trim family for use in recessed downlighting. Compatible for use in Halo and other housings.
|
The H7 family of recessed housings are the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H7RICAT housing is designed for installations where the housing will be in direct contact with insulation and also meet restricted air flow requirements.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The H99RTAT is a small aperture Non-IC AIR-TITE? housing for providing accent and task lighting. The H99RTAT is designed for use in non-insulated existing ceilings. Non-IC Housing is AIR-TITE? but insulation must be kept 3 in away from all sides of housing. For installation from below the ceiling.
|
Coilex? baffle trim for 4 in H99 incandescent family and H470 CFL family of recessed housings. Die-cast trim ring is available in a variety of finishes. Polymer Coilex? baffle is available in white and black. Three cat's paw springs secure trim in housing.
|
ETI Edge-Lit Downlight, 120 V, 8.5 W Wattage, Dimmable, Triac Ballast, 50,000 hr Average Life, 450 Lumens , 2700, 3000, 4000, 5000 K Color Temperature, Recessed Can Diameter: 3 in, Dimmable , -13 to 104 deg F
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The HALO H99ICAT 4 in new construction housing is the professional choice for insulated ceilings. This IC-rated, Air-Tite certified E26 screwbase housing is approved for direct contact with insulation and features "Got Nail!" bar hangers for fast, secure installation to framing. Compatible with HALO led retrofits and many traditional can lighting trims, it offers ultimate flexibility and energy efficiency for new builds and major renovations.
|
Adjustable eyeball trim for 120 V line voltage 4 in H99 family recessed housings. Eyeball has 30 deg tilt and can be rotated 360 deg. Eyeball and die-cast trim ring available in a variety of finishes. Three cat's paw springs secure trim in housing. Integral trim socket with screw in plug to housing socket.
|
The RL56 is a 5/6 in aperture recessed led baffle trim retrofit module suitable for new construction, remodel and retrofit installation. This product is ideal for residential applications and easily installs in existing 5 in and 6 in housings. The field selectable color temperature switch allows users to chose between six different color temperatures for the desired application need. Choose from 2700K warm light to 5000K cool light or set the mood using the dim-to-warm option. This product delivers 600 nominal Lumens, great for standard ceiling heights. The RL series is air-tite, wet location listed and ideal for virtually all residential applications.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Our Color Preference? LowPro retrofit downlights offer four-CCT options - 2700 K, 3000 K, 4000 K or 5000 K, selectable color before or after installation. Reduces inventory hassle and investment at the same time meeting the users exact lighting requirements. The 1.3 in THK low-profile design is ideal for those tight clearance installations. Options included guide plates and 12 in or 20 in extension cords enabling more remote installation of driver box.
|
The Halo RL4 deep baffle is a complete LED baffle-trim module for 4 in aperture recessed downlights suitable for new construction, remodel and retrofit installation. The regressed lens provides uniform illumination and 50 deg optical cutoff. The deep baffle comes standard with both white and black Coilex baffle insters and is wet location. Precision construction makes any housing AIR-TITE for added savings and code compliance.
|
Trim ring with phenolic baffle, 7-1/4 in OD, for use with 6 in housings, white trim with white baffle, for slope ceiling. Halo model number SLOPE H645IC, Orgill Sku number 140.7022. Sleeved.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ETI Color Preference Edge-Lit LED Downlight, 120 VAC, 126 mA, Wattage Rating: 15 W, Lamp Type: LED, Recessed Mounting, Driver Type: Triac Dimming, Average Life: 54,000 hr, Lumens: 900 Lumens, Color Temperature: 2700, 3000, 4000, 5000 K, Color Rendering Index (CRI): 90, Recessed Can Diameter: 5 in, Aluminum, White, Dimmable: Dimmable, Dimensions: 5.9 in Dia x 1.3 in H, Temperature Rating: 25 deg C, Additional Information: 60 Hz Frequency, Low Profile
|
Halo Light Trim, 120 V, 0.07 A, Wattage Rating: 8.8 W, Trim Type: Baffle, Lamp Type: LED, Ceiling Type: Flat, Sloped, Socket Type: E26 Medium, Lumens: 600, 900 Lumens, Color Temperature: 5000 K, Color Rendering Index (CRI): 90, Trim Color: White, Trim Material: Aluminum, White, Dimmable: Yes, Dimensions: 4 in Dia x 3-1/2 in H
|
The Halo H5 Series is designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different lighting effects to be created with one basic housing. The H5 trim size makes the H5RICAT the right choice for applications where dramatic yet inconspicuous lighting is required in an existing ceiling. This is an AIR-TITE? housing and may be used to meet restricted air flow requirements.
|
|
|
