Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE FITTINGS > GAS LINE FITTINGS
Sort By:
1
BrassCraft PSSL-14 Gas Dryer Adapter BrassCraft MAU1-10-8 Gas Adapter BrassCraft MAU2-10-8 Gas Adapter
For 1/4 in ID (3/8 in OD) corrugated tube. For gas clothes dryer connections. Tapped 1/8 in female pipe thread. Dimension of 5-1/2 in L x 3.8 in W x 0.6 in D. Fitting for 5/8 in OD tube (brass). New style 15/16-16 thread. AGA design certified. BrassCraft's steel female gas fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet or to the gas supply pipe. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with larger BTU demands such as a 5 or 6 burner stove, furnace or boiler.
Anderson 54806-0608 Tube To Pipe Coupling Anderson Metal 54808-0606 Flare Tube Fittings FITTING ADAPTER GAS 3/8IN MIP
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged. 9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag. BrassCraft Adapter, Nominal Size: 3/8 in, Flare x MIP Connection, Brass, Chromate-Coated, 3/8 in Dia Outside, Yellow
Anderson Metal 54808-0608 Flare Tube Fittings BrassCraft MAU1-10-12 Gas Adapter BrassCraft MAU2-10-12 Gas Adapter
9/16 in to 24 fine thread flare end for space heaters. Bagged with flag tag. BrassCraft's steel female gas fitting connects a gas connector to an appliance gas inlet or gas supply pipe or gas ball valve. These fittings are manufactured from steel for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with moderate BTU demands such as s a 5 or 6 burner stove, furnace or boiler. BrassCraft's steel female gas fitting adapts a gas connector nut to appliance gas inlet, gas ball valve outlet or to the gas supply pipe. These fittings are manufactured from solid bar stock for a seamless, durable design. The flared end of the fitting connects to the gas connector nut. The male end connects to the gas appliance inlet, gas ball valve or gas supply stub out. Fitting is used with 5/8 in OD (15/16-16 thread) gas connectors for appliances with larger BTU demands such as a 5 or 6 burner stove, furnace or boiler.
BrassCraft PSSC-62 Gas Supply Adapter GAS ADAPTER STEEL 5/8X1/2 FIP GAS ADAPTER STEEL 1/2X1/2 FIP
For corrugated tube. Recommended for gas range connections. SharkBite Gas Connector, Nominal Size: 5/8 x 1/2 in, Flare x FIP Connection, Steel, Zinc, 1-1/2 in L Cash Acme Gas Adapter, 1/2 x 1/2 in Nominal, Flare x FIP Connection, Steel, Zinc-Plated, 6.06 in Length
BrassCraft PSSL-16 Gas Supply Union GAS ADAPTER STEEL 3/8X3/8 MIP GAS ADAPTER STEEL 5/8X1/2 MIP
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with SL or RSL Series connectors. Tapped 3/8 in female pipe thread. Cash Acme Gas Adapter, 3/8 x 3/8 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length Cash Acme Gas Connector, 5/8 x 1/2 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length
Brass-Craft PSSL-15 Female Pipe Union GAS ADAPTER STEEL 1/2X1/2 MIP BrassCraft M40-10 Gas Tube Cap
For 1/4 in ID (3/8 in OD) corrugated tube. Recommended for gas clothes dryer connections. Use with PlumbShop SL or RSL Series connectors. Cash Acme Gas Adapter, 1/2 x 1/2 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length BrassCraft's 5/8 in OD (15/16-16 thread) flare cap is machined from solid brass bar stock for a seamless, durable design. It is used to securely cap off a male flare outlet gas ball valve. Can be used in LP and natural gas installations. Intended for use in residential gas installations with internal pressures ratings up to 1/2 psi maximum.
Anderson 54746-1508 Tube To Pipe Coupling Anderson 54748-1508 Tube To Pipe Connector BrassCraft PSSC-66 Gas Supply Adapter
Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged. 15/16-16 thread for brass range connectors. UPC individually bagged. For corrugated tube. Recommended for gas range connections.
GAS ADAPTER STEEL 5/8X3/4 MIP Brass-Craft PSSC-64 Male Half Union BrassCraft PSSD-42 Gas Supply Union
Cash Acme Gas Connector, 5/8 x 3/4 in Nominal, Flare x MIP Connection, Steel, Zinc-Plated, 6.06 in Length For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP. For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for forced air heaters, gas ranges, furnaces and water heater connections. Use with PlumbShop SD or RSD Series connectors.
Brass-Craft PSSC-63 Male Half Union Brass-Craft PSSD-43 Male Half Union Anderson 54746-1512 Tube To Pipe Coupling
For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP. For 3/8 in ID (1/2 in OD) corrugated tube. Recommended for fixed air heater, gas range, furnace and water heater connections. Used with PlumbShop SD or RSD Series connectors. Tapped 3/8 in FIP thread. Two-pieces construction, nut and body. Use with copper, brass, aluminum or steel tubing. -65 to 250 deg F temperature range. Standard fittings use short nuts. Long nuts are used for higher vibration applications. Resists mechanical pullout. Easy to disassemble and can be reassembled many times with no effect on the seal. Primarily used to fuel equipment, plumbing, gases, refrigeration and vacuum. UPC individually bagged.
Anderson 54748-1512 Tube To Pipe Connector
15/16-16 thread for brass range connectors. UPC individually bagged.
   
 
1