|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.4 density, 0.003 in THK. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
|
Harvey Thread Seal Tape, PTFE, Red/White, 520 in Length, 1/2 in Width, 0.003 in Thickness, 0.4 g/cc Density, -400 to 500 deg F, Elongation: 50 %
|
The plumber tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Harvey Thread Seal Tape, PTFE, White, 520 in Length, 3/4 in Width, 0.003 in Thickness, 0.4 +/- 0.1 g/cc Density, -400 to 500 deg F, Elongation: 50 %
|
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
|
Plumb Pak Thread Seal Tape, PTFE, 520 in L, 1/2 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy-to work with and cleans-up easily.
|
Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open.
|
Harvey? pipe thread stick is a non-hardening gray thread compound designed to lubricate and seal threaded joints on metal pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extra heavy, full density tape especially for gas lines. Recommended leak-proof sealant for lines carrying natural gas, propane, butane, water, oil and chemical installations. Use on plastic, stainless steel, aluminum and all metals, ceramic, synthetic rubber, monel and carbon pipe, conduit, valves, bolts, anything with a thread. Permits easy disassembly. Pressure rating of 10,000 psi 0.0035 mil thick, tolerates up to -450 to 500 deg F. Meets Federal Specification T-27730A. UL listed.
|
Manufactured especially for natural gas, propane, butane, water, oil and chemical lines. Heavier than white tape with density of 1.35 to 1.5 g/cu-cm and 4 mil thick. Complies with MIL-T-22230A (ASG), UL 31 RO, AGA 3226 and CAN/ULC-S642. Spool - dispenser box.
|
Detects any gas leak in just a few seconds on all types of tubing, valve, cylinders, pressurized tanks or any system under air, gas or oxygen pressure. May be used at temperatures between -50 to 160 deg F. Non-toxic, biodegradable, user friendly, non-corrosive and non-irritating to most skin.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides fast positive seal for water lines, sewage lines and sprinkler systems. Effective on metal or plastic threads. 3 mil thick and density of 1.35 to 1.5 g/cu-cm. Complies with MIL-T-27730A and UL 31 RO. Spool display carton.
|
Ideal for use on natural surface materials found in sinks, countertops, strainers and shower bases. Remains flexible, so it is easy-to work with and cleans-up easily.
|
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Pipe Joint Compound, Net Content: 2 oz, Tube
|
Rectorseal no 5? pipe thread sealant is a soft-set, slow drying compound which seals, lubricates and protects threaded pipe and fittings. It can be pressurized immediately for piping up through 2 in and 100 psi (for natural gas, air and water only) and is ideal for application with a wide variety of fluids and gases, including potable water applications. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced and PVC pipe.
|
PC-Plumbing? epoxy putty is for pipes. Use PC-Plumbing? to stop leaks in less than 60 mins. Pre-measured and easy-to-use and two-part epoxy putty does not require tools. Hand mix and apply. NSF? approved for plumbing repairs and for contact with potable water supply pipes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rectorseal T Plus 2? pipe thread sealant is a non-setting, multi-purpose compound which contains PTFE, plus synthetic fibers to create a stronger seal. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC and ABS pipe.
|
Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open.
|
Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Pipe Thread Sealant, Net Content: 2 oz, Tube, Applicable Materials: TFE
|
Harvey? plumber's putty is an easy-to-use and long-lasting putty widely used for setting bowls, rims, strainers and faucets. It remains flexible and will not harden, shrink, crack or crumble even if the cup is left open.
|
Plumb Pak Thread Seal Tape, PTFE, 60 in L, 1/2 in W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Thread Seal Tape, PTFE, 300 in L, 1/2 in W
|
The Vulcan thread sealing tape is adhesive tape that is usable on a variety of plumbing fixtures. It fixes leaks and loose pipes for smoother water flow.
|
0.4 density, 0.003 in thick. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
|
|
|
|
|
|
|
|
|
|
|
|
|
0.4 density, 0.003 in THK. Over 50% elongation and chemically inert. Provides a strong tight seal for any threaded joint and permits easy disassembly. Tolerates -400 to 500 deg F. Suitable for use on oxygen systems. Non-toxic and non-flammable. Meets Federal Specification T-27730A.
|
|
|
