Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.

The Crescent Nicholson triangle single-cut extra slim taper files with American pattern are perfect for filing gullets between saw teeth. The triangular shape makes accessing tight internal angles and squaring corners a breeze and the single-cut construction effortlessly smooths the edges of sheet metal. The slight taper in width towards the file's point creates ease of access in slots. Selecting the right file when filing handsaws supports long-lasting performance.

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the point.

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.

Primarily used to file circular openings or concave surfaces. Tapered slightly towards point.

One side is single cut for tool sharpening and smoothing metal surfaces. Reverse side is double cut for general filing and rapid stock removal. Rectangular shape, one cut edge, one safe edge.

Crescent Nicholson File, Pattern Type: American Taper, 6 in L Blade

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.

The Crescent Nicholson single-cut bastard mill files sharpen mill or circular saws and are ideal for draw filing and finishing metals. The rectangular shape lets you smooth and sharpen straight surfaces. Two square edges allow you to make grooves fixed at the same width as the file and all sizes taper slightly in width to improve access in slots.

Primarily used to file circular openings or concave surfaces. Tapered slightly towards point.

Half round shape and has file section and rasp section on both flat side and half-round side. For the homeowner, home craftsman, boat builder and mechanic.

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.

Crescent Nicholson Woodcraft Rasp, Profile Shape: Half Round, Pattern Type: American, Cut Type: Bastard, 1-1/4 in W Blade, Steel Handle, 8 in OAL

The Crescent Nicholson flat double/single-cut bastard files with an American pattern are ideal for machinists, machinery builders, ship and engine builders. The files can be used effectively by repairmen and others who require rapid removal of metal. The rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots.

Rectangular shape, single cut on sides and edges, two square edges, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.

Crescent Nicholson File, Profile Shape: Round, Pattern Type: American Mill, Cut Type: Bastard, Single, Edge Type: Smooth, 10 in OAL

The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse grade is ideal for use on concave, convex and flat surfaces. The two-sided files are rounded on one side and flat on the other, so you can round out holes with ease. Half-round bastard files are double-cut on the rounded sides, allowing you to quickly remove material from the work piece.

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circular saws or draw-filing and finishing metals.

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfaces.

The Crescent Nicholson half-round rasp files are for trades workers with a bastard-cut texture for efficient material removal. The half-round shape with individually cut teeth is excellent at removing material from wood or soft metals. Attach any Crescent Nicholson handle to the tang for ease of use in a variety of applications, although the primary users are woodworkers, hobbyists, plumbers and other trades professionals.