|
Heavy-duty boundary flags can be used for any brand of underground pet fence. Boundary flags are to be used as a visual aid for your pet to help them learn the boundary you've determined for them. Place flags approximately 10 ft apart to remind your pet of his off-limits area. Between days 15 and 30, you will be monitoring your pet's progress. After you are satisfied your pet's training is complete, remove every other boundary flag every 4 days until all flags are removed. In about a month, your lawn will be free of training flags and your pet will know his limits.
|
Expands your containment system beyond the initial 500 ft. Of wire that accompanies the in-ground Fencing? system kit. Each spool is 500 ft/150 m of 20 ga, solid core, burial-grade wire. The table below is a guide to help determine the amount of wire you will need based on the area in which you want to contain your pet. Length of wire needed will vary due to the amount of twisted wire and layout used. For proper system performance, the splice connection must be waterproof. We recommend using gel-filled splice capsules and wire nuts (RFA-366) when splicing your additional boundary wire.
|
This extra receiver collar can be used to add another dog to any PetSafe in to ground fence system or as a replacement collar to the Stubborn Dog In to Ground Fence (PIG00 to 10777 or PIG23 to 10682). The collar features 4 levels of static correction at a higher intensity especially for stubborn or hard to train dogs.
|
