|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AXPB Wired, non-Illuminated pushbutton offers a reliable manual control option for Ghost Controls automatic gate openers. When connected to the main system controller using two wires, this button allows you to open, stop or close the gate as needed. Installation requires low Vage 16 ga stranded wire, which must be purchased separately. This straightforward accessory is ideal for interior wall-mount installations or sheltered outdoor locations where basic control access is desired.
|
The AXLC locking clevis pin is a solid-steel replacement for the standard rear clevis pin included in Ghost Controls gate opener kits. Designed to improve security, this pin allows you to use your own padlock (up to 8 mm shank Dia) to lock the opener arm to the rear post mount, helping prevent unauthorized removal or tampering.
|
The Mighty Mule FM132 pushbutton control brings seamless, DIY gate opener activation to your property with its intuitive design and rugged, hard-wired construction. This wired gate opener control fits indoors or outdoors, letting you conveniently trigger any Mighty Mule automatic gate opener from a safe vantage point.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AXPO Push-To-Open brackets are designed for gate installations where the gate opens outward, away from the property. These brackets replace the standard rear mount pivot brackets included with Ghost Controls automatic gate openers to enable push-to-open functionality. For dual gate systems, two sets of Push-To-Open Adapter Bracket kits are required.
|
The Mighty Mule MMT103 3-button gate opener remote provides secure, reliable access control for both your gate and garage door openers with built-in Code Safe? technology and seamless HomeLink? compatibility. It is designed for easy DIY programming, allowing you to control up to three Mighty Mule devices right out of the box.
|
Mighty Mule FM133 Security pin lock adds an extra layer of swing gate security by replacing the standard clevis pin with a heavy-duty lock, preventing the removal or theft of your gate opener arm. You'll enjoy peace of mind with its universal compatibility and simple DIY setup using the included keys.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The AXTB universal Tube Bracket kit allows for quick and secure mounting of Ghost Controls automatic gate openers to tube-style gates without the need for drilling. Designed for tube gates with outside Dias between 1-5/8 in and 2 in, these brackets use a simple bolt-on installation method that preserves the structural integrity of your gate. The brackets can be painted to match the color of your gate, making them a discreet and visually appealing addition. This kit is already included in the TSS1, TSS1XP, TDS2 and TDS2XP gate opener kits. Covered by an 18 month warranty.
|
Mighty Mule FM148 push to open bracket is an essential automatic gate opener accessory that attaches your gate to the post at an 11 in angle, allowing it to swing away from your property even on sloping driveways. Designed for easy DIY installation, this swing gate bracket ensures reliable operation and minimal adjustments so you can set it up yourself in no time. You'll enjoy seamless compatibility with multiple Mighty Mule models for maximum flexibility.
|
The AXGN outdoor mounting pedestal is designed for convenient, reliable installation of Ghost Controls wireless keypads and accessories. Built for long-term outdoor use, it attaches easily to standard 4 x 4 wooden posts and can also be mounted to other surfaces such as metal, concrete or brick with the correct fasteners (not included). This pedestal is ideal for positioning keypads or remotes at an optimal height and angle and features pre-drilled holes that align ideally with the AXWK Wireless Keypad for quick setup. All Accessories backed by an 18 month warranty.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ghost Controls Low Voltage Wire, Direct Burial, 16 ga Wire, 100 ft Length, 2 Conductors
|
This MMK200 digital keypad is designed for use with Mighty Mule automatic gate operators. The wireless digital keypad provides secure access to your property. It can be programmed to use up to twenty-five different personal identification number (PIN) codes. Ideal for entry or exit. The radio format provides unparalleled security with more than a million different codes. And code set up is simple add or remove codes for users in just a few steps.
|
This 16 ga, multi-stranded, dual conductor low voltage wire can be used for installing an AC transformer, solar panel, wireless intercom/keypad or most other automatic gate opener accessories. This wire is UV treated and PVC coated and is rated for direct burial. However, GTO recommends running the wire through conduit or PVC pipe in order to protect it from the elements and ensure longer life for your wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The Ghost Controls AXWK Premium Wireless Keypad is the superior gateway to your automatic gate opener system and provides unprecedented leading-edge control and features. This weatherproof outdoor keypad is more than just an access point for visitors to your home or property. The unique keypad design and special keys also provide the ability for you to activate or deactivate unique features for your system such as PartyMode, 1Key, PartyMode Secure, gate controller battery status and VacationMode. Our battery-powered keypad requires a remote transmitter to already be programmed into your system so that it can easily be ???learned??? into your gate controller. Once the gate controller has ???learned??? your keypad, you can then easily access using dedicated keys, additional features not available on other competitor automatic gate opener keypads, like PartyMode, PartyMode Secure and VacationMode. For added convenience, the keypads are designed for direct installation on the AXGN Outdoor Mounting Pedestal or may be easily mounted to any flat wood or metal surface such as a 4 x 4 in wood post with the included hardware pack. Some customers may choose to install a keypad on each side of the gate so that entry or exit from either direction can access a keypad to activate the gate opener system. The AXWK Wireless Keypad requires two (2) C batteries (not included) for operation. These batteries should be replaced on an annual basis in most installations for continued reliability throughout all seasons of the year.
|
The wireless driveway alarm alerts you when a vehicle enters or exits your property. When a vehicle passes the sensor, the indoor receiver emits a chime. It has a wireless range of 400 ft (121.9 m) and will not be activated by people, animals or wind. The indoor receiver can be mounted on a table or on the wall. Multiple indoor receivers (up to 3) can be added for more convenience. Detects moving vehicles and not a motion sensor.
|
10 W premium monocrystalline solar panel for your Ghost Controls automatic gate opener system or your coop controls automatic coop opener system. This monocrystalline solar panel easily connects into the control box to supply recharging power to the main system batteries. Three of these 10 W panels can be connected in parallel to your Ghost Controls automatic gate opener system to optimize available sunlight and maximize the time that power is being supplied to your system.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The GHOST CONTROLS internal battery box allows you to conceal your batteries inside of a weather resistant box that is mounted to a post.
|
The Mighty Mule Digital Keypad Mounting Post delivers a robust, weather-proof solution for your gate access control needs, combining an aluminum keypad mounting post design with a sleek black anodized finish. You'll enjoy a seamless DIY gate access installation whether you're fitting Mighty Mule or GTO keypads, intercom systems or other digital control devices.
|
Mighty Mule Solar Panel Kit, 12 V, Wattage Rating: 10 W
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mighty Mule Wireless Connectivity System, ABS, Dimensions: 1 in H x 5 in W x 3-1/2 in D, Suitable for: Mighty Mule 371W, 372W, 571W, 572W, TS571W Gate Operators, Includes: Radio Module and Antenna, (1) Power Adapter Cord
|
Installing the Ghost MultiConnect? Kit to your Ghost controls red control board allows you to access and control your automatic gate from anywhere in the world. Once the Ghost MultiConnect? Kit is installed you will need to download our customized app (free on apple and google store) to your phone or computer and have a Wi-Fi, internet or Bluetooth connection.
|
The Ghost Controls Wired Vehicle Sensor is used to sense a moving vehicle and automatically trigger the gate system to open. Most commonly used inside of the property to trigger the gate to open for a vehicle exiting the property, this sensor is buried in the ground next to the driveway.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The GHOST CONTROLS AXWV wireless vehicle sensor is used to sense a moving vehicle and automatically trigger the gate system to open. Most commonly used inside of the property to trigger the gate to open for a vehicle exiting the property, this sensor is buried in the ground next to the driveway.
|
The AXZL ZombieLock from ghost controls is an automatic gate latch designed to securely hold vehicular driveway gates closed until the gate operator begins opening. Controlled by the gate system, it ensures the lock disengages before any gate movement, protecting both the hardware and gate alignment. This lock is ideal for single gates up to 16 ft or dual gates with a maximum opening of 24 ft (12 ft per leaf). ZombieLock is the only gate lock engineered to work seamlessly with Ghost Controls gate systems and utilizes proprietary ZombieCode to maintain locking functionality during power outages. It is also compatible with most 12 VAC or DC gate openers from other brands, though full functionality is limited without ZombieCode. The unit includes a keyed cylinder for manual unlocking and comes with 24 ft of wire for connection to the control panel.
|
Some installations are unable to reach an AC power point within 1000 ft of the gate opener installation. Some customers do not wish to incur the expense, time and labor necessary to trench over long distances (up to 1000 ft) and bury the low voltage wire inside of PVC conduit from your AC transformer to gate operator control box. Solar power adds flexibility to installing a gate opener system. Many installations in the United States are eligible for Federal/Local tax credits. Your gate installation may utilize up to three 10 W Ghost Controls solar panels connected in parallel or one 30 W panel to maximize your charging potential.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mighty Mule FM143 automatic gate lock delivers reliable automatic gate lock security with easy DIY gate lock installation, securing your single or dual gate every time it's activated. Designed for you to enjoy peace of mind in high-wind areas and gates over 8 ft long, this gate lock accessory integrates seamlessly with existing Mighty Mule or Linear Pro openers.
|
Simply drive past the vehicle sensor and your gate will open automatically. Allowing friends, family and delivery personnel to exit the property without the need of their own transmitter or your supervision. The vehicle sensor is designed to be buried alongside the driveway and wires to your gate opener control on board with 50 ft (15.2 m) of direct burial cable (included). People and animals will not activate the electromagnetic sensor. Its detection radius is up to 12 ft (3.7 m).
|
Ghost Controls Deep Cycle Battery Box, Dimensions: 19 x 16-1/2 x 12-1/2 in, Includes: Battery Harness, Mounting Bracket and Installation Hardware
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Mighty Mule Gate Opener, Single Swing, Power Source: Battery, Power Supply: 12 V, Maximum Gate Length: 12 ft, Includes: Control Box, Mounting Hardware, (1) Remote with Visor Clip
|
Mighty Mule Gate Opener, Single Swing, Power Source: Battery, Power Supply: 12 V, Maximum Gate Length: 16 ft, Includes: AC Transformer, Control Box, Mounting Hardware, (1) Remote with Visor Clip
|
Mighty Mule Gate Opener, Single Swing, Power Source: Battery, Power Supply: 12 V, Maximum Gate Length: 18 ft, Includes: Mounting Hardware, (1) 12 V Battery, (1) Additional Backup Battery Box, (1) Remote with Visor Clip
|
|
|
