Drill has variable speed reverse for drilling and driving control, keyless chuck makes bit changing quick and simple, 24 position clutch prevents screws from stripping, 0-750 RPM, soft grips for comfort, slide pack battery provides easy installation and removal of the battery. Stud sensor detects studs through walls up to 3/4" thick. Includes cordless drill with stud sensor, (1) battery pack, (1) DC plug charger and storage bag.

Drill has variable speed reverse for drilling and driving control, keyless chuck makes bit changing quick and simple, 24 position clutch prevents screws from stripping, 0-750 RPM, soft grips for comfort, slide pack battery provides easy installation and removal of the battery. Stud sensor detects studs through walls up to 3/4" thick. Includes cordless drill with stud sensor, (1) battery pack, (1) DC plug charger and storage bag.

Drill/driver features 310 in-lbs of torque, two speed gear box for increased versatility, LED work light, 11 position clutch is lightweight for easier use. Impact driver features high performance transmission (torque 1375). Compact and lightweight for ease of use and Quick Release 1/4" hex chuck. Includes (1) LDX220 drill/driver, (1) BDC1202 Impact driver, (1) 20 volt max battery, (1) charger, (2) screwdriver bits and (1) soft bag.

20 volt cordless Lithium-Ion 1/2" drill driver. Two speed gear box between 0-350 and 0-1,500 rpm. Compact and lightweight design. Keyless 1/2" metal ratcheting chuck. Powerful 1,450 in-lbs of torque providing 3,100 BPM. 0-2,800 RPM variable speed to match speed to the application. One handed 1/4" hex chuck for bit changes on the fly. Includes 20 volt cordless Lithium-Ion 1/2" drill driver, 20 volt cordless Lithium-Ion 1/4" Impact driver, (2) 1.3 Ah Li-Ion batteries, Li-Ion standard charger, double ended screwdriver bit, no. 2 Phillips bit tip and kit bag.

Drill driver delivers 275 in-lbs of peak torque, 3/8", 0-400/0-1,500 RPM. Impact driver delivers 850 in-lbs of torque, 1/4" hex, and 0-2,000 RPM for fast driving. Kit also includes two M12 Redlithium batteries, 30-minute charger and contractor bag.

Ultra compact size with variable speed, ergonomic shape with even pressure and easy control; Soft grip handle provides increased comfort on the job. 12V max Lithium-Ion batteries provide longer run time and lower self-discharge. Charger meets Energy Star energy-efficient guidelines. Specs: 2-Speed 3/8" Driver-Drill (0-350 / 0-1,300 RPM) delivers 200 in.lbs. of Max Torque in an ultra compact size of only 2.2 lbs, Variable speed Impact Driver (0-2,400 RPM & 0-3,000 IPM) provides 800 in.lbs. of Max Torque in an ultra compact design of only 2.0 lbs.  Includes: 12V max Lithium-Ion driver-drill (FD02W), 12V max Lithium-Ion impact driver (DT01W) , (2) 12V max  Lithium-Ion Batteries, (1) battery charger and tool case.

Drill/driver features a two-speed transmission that delivers 0-400/0-1,500 RPM, 3/8" keyless chuck, impact driver delivers 950 in/lb of torque and 1/4" hex chuck, three LED lights that provide visibility without shadows in dark work areas, a battery that has been placed at the bottom of the handle that allows the tool to stand up between uses. Includes: 2 tools, (2) 12V max Lithium-Ion battery packs, (1) bit tip, (2) belt hooks, (1) 40 minute charger, (1) contractor bag.

Hammer driver-drill features 1/2" chuck, variable 2-speed, 0-400 & 0-1700 RPM, 4-pole motor delivers 560 in lb of max torque and weighs 5.3 lb. Impact driver features variable speed, 0-2,300 RPM & 0-3,200 IPM, provides 1,330 in lb of max torque and weighs 3.4 lb. 30-minute rapid optimum charger communicates with the battery's built-in ship throughout the charging process to optimize battery life. Charger has a built-in fan to cool the battery. Meets Energy Star guidelines. Includes two 18V LXT lithium-ion battery, 30-minute rapid optimum charger and tool case.

Compact 1/2" drill/driver with 425 in-lbs of torque, weighs 4 lbs., 1/4" hex impact driver with 4-pole frameless motor with 1400 In/lbs. of torque. Includes: 2 tools, (2) 18V Red Lithium compact battery packs, (1) 18V charger, (1) carrying case.

The kit includes the following: (1) PCC601 1/2" drill driver, (1) PCC641 1/4" impact driver, (1) PCC670 reciprocating tiger saw, (1) PCC700 LED flashlight, (2) PCC680L 20 volt Lithium-Ion batteries, (1) PCC691L charger and (1) kit bag.

Two speed transmission drill/driver features 20V Max, 1/2" ratcheting chuck, 0-600/0-2,000 no load speed, and 15 clutch settings. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800 rpm no load speed, 3200 ipm, and 1400 in-lbs max torque. Includes: 2 tools, 20V Max lithium ion 1.5 Ah battery packs, fast charger, (2) belt hooks, bit holder and kit box.

Two speed 1/2" hammer driver/rill (0-400/0-1,500 RPM) with 4-pole motor delivers 450 in/lbs. of max torque and weighs only 4.2 lbs., variable speed impact driver (0-2,300 RPM) provides 1,330 in/lbs. of max torque and weighs only 3.4 lbs. Includes: 2 tools, (2) 18V LXT Lithium-Ion batteries, (1) 30 minute rapid optimum charger, (1) tool case.

Drill/driver delivers 189UWO max power, 2 speed settings, 1,500 max rpm, 15 clutch settings, 3/8" one sleeve chuck, 0-400/0-1,500 rpm no load speed and weighs 2.4 lbs. Pivot reciprocating saw with keyless blade clamp, 0-2,700 spm, 9/16" stroke length, electric brake, adjustable 3-position handle, LED light, and weighs 3.1 lbs. 1/4" Impact driver delivers 950in-lbs/79ft-lbs of max torque, 0-2,450rpm no load speed, 0-3,400ipm, 3 LED lights, belt hook, one-handed loading and weighs 2.3 lbs. LED worklight provides 4 hour run time, 130 lumens output, kick stand, pivoting head rotates 360-degrees and weighs .5 lbs. Includes two 12 Max Li-Ion batteries, fast charger, bit tip, two belt hooks, 4" 6 tpi wood cutting recip blade, 4" 18 tpi metal cutting recip blade and kit bag.

Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Includes: 2 tools, (20) 20V Max lithium ion 1.5 Ah battery packs, fast charger, (2) belt hooks, on-board bit holder and a handy zippered bag.

Brushless motor delivers more run time. XR Li-Ion batteries with fuel gauge provides more capacity. DCD790 20V Max 1/2" drill/driver compact (7.2" front to back), lightweight (3.5 lb) design fits into tight areas. DCF886 20V Max 1/4" impact driver compact (5.6" front to back) design fits into tight areas. Both tools feature LED lights with 20 second trigger release delay providing increased visibility in dark or confined spaces.

The M18 2-tool combo kit includes the 1/2" Compact Brushless Hammer Drill Driver (2702-20) and the 1/4" Hex Brushless Impact Driver (2750-20). The M18 Cordless system's technologies and electronics, innovative motor design and superior ergonomics provide the most efficient blend of power, weight and performance in the industry. The M18 1/2" Compact Brushless Hammer Drill/Driver is the most compact 18 volt drill on the market and delivers over 50 percent longer run-time than drills with brushed motors. The M18 1/4" Hex Brushless Impact Driver is the most compact Impact Driver in its class and delivers over 50 percent longer run-time than Impact Drivers with brushed motors. Both tools feature Milwaukee built brushless motors, REDLINK Electronics and REDLITHIUM batteries that provide more efficient power delivery, for few trips to the charger. This kit includes (1) REDLITHIUM XC 4.0 battery for maximum performance and 2x longer run-time, which is compact and light weight, ideal for fastening applications. The kit also includes a carrying case and a multi-voltage charger.

DeWalt brushless motor delivers up to 57 percent run time. XR Li-Ion batteries with fuel gauge provides more capacity over standard pack. DCD795 20V Max 1/2" hammerdrill compact (7.8" front to back), lightweight (3.6 lb) design fits into tight areas. DCF886 20V Max 1/4" impact driver compact (5.6" front to back) design fits into tight areas. Both tools feature LED lights with 20 second trigger release delay providing increased visibility in dark or confined spaces.

Hammer drill/driver with 4-pole frameless motor delivers 525 in-lbs of peak torque, 0-550/0-1,700 rpm, 29,000 bpm, all metal 1/2" single sleeve ratcheting chuck and weighs 3.5 lbs. Compact impact driver with 4-pole frameless motor delivers 1,400 in-lbs of torque, 0-2,200 rpm, 0-3,200 ipm, 1/4" hex quick change chuck and weighs 2.6 lbs. Includes two M18 XC high capacity Red Lithium batteries, 1-hour charger and contractor bag.

Screwdriver delivers 175 in-lbs of torque, 15 position clutch and 0-500 RPM. Impact delivers best-in-class 850 in-lbs of torque, 1/4 hex and 0-2000 RPM. Hackzall reciprocating saw delivers 0-3000 SPM, and 11" for quick cutting in tight spaces. Work light features a 90-degree rotating head and an integrated magnet for hands-free. Kit also includes two 12V Redlithium battery packs. 30 minute charger, two Hackzall blades and contractor bag.

Hammerdrill features 3-speed all-metal transmission, 0-575/0-1,350/0-2,000 max rpm, 0-9,775/0-22,950/0-34,000 max bpm, 22 clutch settings, 1/2" all metal ratcheting chuck delivers 535UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Includes: 2 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, belt hooks, 360-degree side handle and contractor bag.

Hammerdrill features 3-speed all-metal transmission, 0-575/0-1,350/0-2,000 max rpm, 0-9,775/0-22,950/0-34,000 max bpm, 22 clutch settings, 1/2" all metal ratcheting chuck delivers 535UWO. Reciprocating saw features 4-position keyless blade clamp, 1-1/8" stroke length, variable speed with 0-3000 spm, pivoting adjustable shoe, rubber over molded comfort grip, double oil sealed shaft, and electric brake. Includes: 2 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle and contractor bag.

Hammer Drill/Driver with 1/2" chuck, milwaukee 4-pole frameless motor delivers 525 in-lbs of peak torque, 0-550/0-1,7000 RPM, and 29,000 BPM. One-Handed reciprocating saw features a dual gear anti-vibration system for unmatched comfort and control. 1/4" Hex Impact with the Milwaukee 4-pole frameless motor delivers 1400 in-lbs of torque. Work light provides a fold-away hook for hands free use and 135-degree rotating head to direct light at the work area. Digital Power Management overload protection prevents damage to the tool and battery in abusive situations. Works with M18 XC High Capacity Red Lithium batteries and M18 compact Red Lithium batteries. Includes (2) M18 XC High Capacity Red Lithium batteries, 1-hour charger, general purpose Sawzall blade and contractor bag.

2 tool combo kit includes: (1) M18 Fuel 1/2" hammer drill/driver, (1) M18 Fuel 1/4" hex impact driver, (2) M18 Redlithium XC 4.0 extended capacity battery pack, (1) M18 and M12 multi-voltage charger, (1) belt clip, (1) carrying case and (1) side handle. Brushless motor works harder and lives longer, while reducing noise and cooling more rapidly to deliver years of maintenance free performance. Durable battery pack provides longer life.

Two speed 1/2" compact drill/driver dual speed range of 0-500 and 0-1700, trim saw with 5-3/8" 16-tooth carbide blade, 50-degree bevel, reciprocating saw with keyless blade clamp, 1-1/8" stroke length, 0-3,000 SPM, flashlight with pivoting head rotates 90 degrees, extra-bright Xenon bulb. Includes: 4 tools, (2)  18-Volt batteries, (1) hour charger, (1) 16-tooth carbide tipped trim saw blade, (1) circular saw rip fence, (1) bulb, (1) kit box.

Hammerdrill/drill/driver with 3-speed all-metal transmission and 1/2" self-tightening chuck, max RPM, 0-500/0-1,250/0-2,000, max BPM 0-8,500/0-21,250/0-34,000, circular saw with 6-1/2" carbide blade, 0-50 degree bevel capacity, 3,700 RPM, reciprocating saw with keyless blade clamp, 1-1/8" stroke length, 0-3,000 SPM, flexible floodlight provides 3 hours of run time, extra-bright Xenon bulb. Includes: 4 tools, (1) hour charger, (2) 18V XRP batteries, (1) 360 degree side handle, (1) carbide tipped blade, (1) kit box.

Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Flashlight features bright LED output, 11 hours run-time and head rotates 120-degrees. Includes: 4 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle, belt hook and contractor bag.

Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Reciprocating saw with keyless blade clamp allows for quick blade change without touching blade or reciprocating shaft. Circular saw features 6-1/2" carbide blade that can cut 2x4's at a 45-degree angle in a single pass. Flashlight features bright LED output, 11 hours run-time and head rotates 120-degrees. Includes: 4 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle, carbide tipped blade and contractor bag.

Hammer drill/driver with 1/2" chuck, 4 pole frameless motor, 525 in/lbs of peak torque, 0-550/0-1,700 RPM, and 29,000 BPM, sawzall reciprocating saw with gear protecting clutch and counter balance mechanism, 6-1/2" circular Saw delivers 3,500 RPM with magnesium upper and lower guards for maximum durability, work light provides a fold away hook for hands free use and a 135 degree rotating head to direct light at the work area. Includes: 4 tools, (2) HC high capacity Red Lithium battery packs, (1) one hour charger, (1) general purpose sawzall blade, (1) contractor bag.

Hammerdrill features two speed transmission, 0-600/0-2000 max rpm, 34000 max bpm, 15 clutch settings, 1/2" ratcheting chuck and 350UWO. Impact driver features 3 LED lights with 20 second delay to provide visibility without shadows, 1/4" hex chuck, 2800rpm no load speed, 3200ipm, and 1400in-lbs max torque. Circular saw features 6-1/2" carbide blade that can cut 2x4's at a 45-degree angle in a single pass. Includes: 5 tools, (2) 20V Max lithium ion 3.0 Ah battery packs, fast charger, 360-degree side handle, belt hook, carbide tipped blade and contractor bag.