Drills through mild steel, hardwood and softwood. Features mid-grip design for balance and control, keyless chuck for fast and easy bit changes, two-finger variable speed trigger for control between low to high speeds. Specs: 6 ft. cord length, max. hole diameter in: hardwood- 3/8"; softwood- 3/4", 120V-50-60Hz, 2,600 no load speed, and weighs 3.2 lbs. Includes carrying bag.

Features variable speed reversing for controlled drilling and driving, bubble level, on-board bit storage. Specs: 0-1,500 rpm, capacity in: steel- 3/8", wood- 1". Includes one double ended screwdriving bit and storage bag..

Quick connect system allows for tool free change of a variety of tool attachments. Powerful 4.0 amp motor provides enough power for a full range of applications and attachments. Compact and lightweight design allows user to carry out drilling/driving tasks in confined spaces and with ease. 11 position clutch provides extra level of control to prevent stripping and overdriving screws.

For drilling holes through and driving large fasteners in wood, metal and plastic. Features variable speed reversing, all metal gear housing, reversing brush system and 360 degree side handle. Specs: 0-900 rpm, capacity in: steel- 1/2", wood- 1-1/2". Includes side handle, chuck key and holder.

Belt clip holds drill securely while working. Lock-on button provides easier control during prolonged use. Soft grip handle improves user comfort and control. Specs: 0-2,500 rpm no load speed, 6 ft power cord, variable-speed trigger, anti-slip comfort grip and weighs 3.2 lbs.

Features variable speed reversing dial located in switch, lightweight, compact, maximum torque of 108.1 in-lbs, form fit palm grip with minimal vibration. Specs:  0-2,500 rpm no load speed, 108.1 in-lbs maximum torque, cut capacity in: wood 1", steel 3/8" and weighs 3.1 lbs.

Features variable speed reversing with ratcheting keyless chuck for minimal slipping, lock-on switch recessed in handle to prevent accidental lock-on, soft grip handle, oversized 2-finger trigger, service minder brushes, and sturdy belt clip. Specs: 8 ft. cord length, 0-2,600 no load rpm, 120V ac rating and weighs 3.4 lbs.

Powerful 7.0 amp motor gives the user the power to get the job done. Compact design allows for user comfort. Lightweight design decreases user fatigue. Variable speed trigger switch gives you greater versatility. Lock-on switch reduces fatigue. No load speed: 0-2,800 rpm. Maximum watts out: 440. Tool weighs only 3.55 lbs. Capacity in wood (spade bit): 1". Capacity in wood (hole saw): 1-1/8". Capacity in steel (twist bit) 3/8". Includes chuck key.

Variable speed reversing trigger for versatility in drilling and fastening applications with a soft grip handle and all ball-bearing construction that delivers high performance in heavy-duty applications. All metal ratcheting keyless chuck for greater bit retention. Specs: 650w max watts out, capacity in: wood (spade bit) 1", wood (hole saw) 1-1/8" and steel (twist bit) 3/8", single gear reduction, pistol grip handle, anti-slip grip and weighs 4.1lbs.

Triple gear reduction provides torque for demanding drilling applications. Soft grip mid handle provides balance and control. Specs: 0-800 rpm, drilling capacity in: steel- 1/2", wood- 1-1/12", 6 ft power cord, variable speed trigger, anti-slip comfort grip, and weighs 4.8 lbs. Includes cast metal side handle, chuck key and holder.

Variable speed trigger for fast drilling in wood and metal. All metal gear case provides superior gear support in high torque applications. Soft grip handle and two finger trigger. Specs: Voltage 120 AC only, 0-2800 rpm no load speed, keyless metal chuck, 2-wire 8' cord and weighs 4.25 lbs.

Features variable speed /reversing for drilling in a wide variety of materials, low decibel rating (79dB) in-line handle, large recessed lock-on button, all-ball bearing construction and large trigger switch. Specs: 0-2,500 rpm no load speed, capacity in: steel- 3/8", wood- 1" and weighs 3.1 lbs. Includes keyless chuck and plastic tool case.

Features variable speed control trigger, cast aluminum gear housing, double gear reduction, oversized reversible switch and trigger lock, removable side handle, and belt hook. Designed to fit in hand for improved control with minimal vibration. Specs: 0 to 850 rpm no-load speed, 416 in-lbs max torque, drilling capacity in: wood- 2-9/16", steel- 1/2", hole saw- 4-1/2" and weighs 4.6lbs. Includes chuck key, side handle, handle joint, injection molded carrying case.

Variable speed and reversing switch, metal gear housing for jobsite durability, made of helical cut steel, heat treated gears, two finger trigger for increased comfort.  Specs: 0-850 rpm no-load speed, 600 watts maximum output power, 360 degree side handle, double gear reduction. Includes: chuck key with holder.

Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord and weighs 5.4 lb. Includes side handle and chuck key with holder.

Features an all metal gear case and diaphragm, heavy-duty chuck, 360-degree locking side handle, ergonomic textured grip and two finger trigger for user comfort and balance. Specs: 120V AC, 0-850 rpm no load speed, drilling capacity in: wood (auger bit)- 1-1/2", wood (self-feed bit)- 2-9/16", metal (hole saw)- 2", 1/2in-20 spindle, double gear train, 8 ft. fixed 3-wire rubber cord, soft grip handle and weighs 5.4 lb. Includes side handle and chuck key with holder.

Features a variable speed reversing switch, motor generates 50 percent more power with increased overload protection for added durability, soft grip handle and two-finger trigger, 360 degree locking side handle for greater control and versatility, metal gear housing for jobsite durability and increased reliability. Specs: 980W max watts out, drill capacity in: wood (spade bit) 1-1/2", wood (hole saw) 3-5/8", steel (twist bit) 1/2", wood (self-feed) 2-9/16", wood (auger bit) 1-1/2", steel (hole saw) 2", double gear reduction, handle style pistol grip design, anti-slip grip and weighs 4.9lbs. Includes 360 degree locking side handle with soft grip and chuck key with holder.

All metal gear case and diaphragm. 360-degree locking side handle. All metal Grip-Lok, 2-sleeve keyless metal chuck. Ergonomic tactile soft grip and 2-finger trigger. Specs: 0-2500 rpm no load speed, capacity in: wood (flat boring bit) 1-1/2", wood (hole saw) 2-1/4", metal (twist bit) 1/2", 3/8in.-24 spindle, double gear train, 10' fixed 2-wire rubber cord, double insulated and weighs 4.1 lbs. Includes side handle.

Provides a unique chuck angle for reaching into tight areas. Large paddle trigger, textured grip with convenient forward/reverse lever. Angled cord exit keeps cord out of work area. Specs: 120 volts AC, 0-1,300rpm, 1/2in.-20 spindle, 3/8" metal twist bit capacity, double insulated construction, double gear train, 8 ft. fixed cord and weighs 3.9 lbs. Includes chuck key with holder.

Drill has variable speed reversing and is made from helical-cut steel with heat-treated steel gears for long life and durability, metal gear housing for jobsite durability and increased reliability, two-finger, rubber trigger for increased comfort, triple gear reduction, 360 degree side handle. Specs: 0-600rpm no load speed, max watts out 600W, capacity in wood (spade bit) 1-1/2", (hole saw) 4", (self-feed) 2-9/16", (auger bit) 1-1/2", capacity in steel (twist bit) 1/2", (hole saw) 2-3/4", triple gear reduction, handle style pistol grip, weighs 4.4lbs. Includes: 360 degree side handle, chuck key with holder

Features variable speed reversing switch for increased versatility, 1/2" all metal single sleeve ratcheting keyless chuck with automatic spindle lock, soft mid handle grip. Specs: 0-1,200 rpm no load speed, 980 W max watts out, drilling capacity in: wood: (spade bit)- 1-1/2", (hole saw)- 3-5/8", (self-feed)- 2-9/16", (auger bit)- 1-1/2", steel: (twist bit)- 1/2", (hole saw)- 2", double gear reduction, anti-slip grip and weighs 5.2 lbs. Includes 360 degree locking side handle with soft grip.

Features trigger speed control, reversing, a Quik-Lok cord that can be removed from drill for storage or service replacement, brush cartridge system with a set of spare brushes.  Specs: 120v AC, 0-950rpm no load speed, capacity in: wood (auger bit) 1-1/2", (self feed bit)  2", metal (hole saw)  2", 1/2 in.-20 spindle, double gear train, 8ft cord, grounded, trigger lock and weighs 4.8 lbs. Includes side handle, chuck key with holder.

Reversible, variable speed. Retractable belt clip, ergonomic rubberized grips, large trigger switch, comfortable side handle rotates 360 degrees, all ball and needle bearing construction, brushes are easily accessible, double insulated. Specs: capacity in:  steel 1/2", wood 1-1/2"; 0-900 RPM no load speed, weighs 4.8 lbs. Includes: chuck key, side handle.

Powerful motor engineered for improved drilling and mixing performance; provides increased speed and torque for drilling large holes, balanced for reduced operator fatigue. D-handle rotates 360 degrees with 24 positive stops for multi position operation. Specs: AMPS (120V), capacities in wood: (auger bit 1-7/16"), (self feed-2-9/16"), (hole saw-5"), in steel: (twist bit) 1/2", (hole saw) 3", no load speed 600 RPM, overall length  13-3/8", weighs 6.3 lbs. Includes: (1) 1/2" spade handle drill, (1) drill chuck, (1) chuck key, (1) side handle and On-board chuck key storage for fast and convenient bit changes.

Features variable speed reversing switch avoids air bubbles when mixing mud and offers greater control when drilling. Specs: 600 watts max power output, 0-550 rpm no-load speed, triple gear reduction, drilling capacity in: wood (spade bit) 1-1/2", wood (self-feed) 2-9/16", wood (hole saw) 5", wood (auger bit) 1-1/2", steel (twist bit) 1/2", steel (hole saw) 3" and weighs 7.5 lbs. Includes 3 position side handle, 2-position rear spade handle chuck key and holder.

Extra long handles, two handed operation for large hole drilling or material mixing, 450 rpm operating speed, for large bits or any hi-torque application. Heat treated gears are helical-cut for quiet performance. Specs: voltage  120 AC , wood capacity: (auger bit) 1-1/2", (hole saw) 4", metal capacity (twist bit)  1/2", spindle  5/8 in.-16, triple gear train, 8 ft. fixed cord, grounded, weighs 11.4 lbs. Includes: pipe handle, chuck key, flexible key holder.