Home > Shop > POWER TOOLS & PNEUMATICS > POWER TOOL ACCESSORIES > POWER DRILLING & ACCESSORIES > PERCUSSION BITS
PERCUSSION BITS
Sort By:
1 2 3
S-B MC12 Multi-Construction Jobber Length Drill S-B MC12 Multi-Construction Jobber Length Drill, 3/8 in Dia, 6 in L 4 in Steep Flute, 3/8 in Softened Shank

Steep flute with ribs for optimal dust removal, softened shank for aggressive griping power and customized carbide geometry optimized to handle a variety of material. Can be used in rotary and impact mode in concrete without bit change; drills into many grades of tiles, from granite to porcelain.

Your Price: $7.68
Bluegranite HCBG04 Hammer Drill Bit Bluegranite HCBG04 Hammer Drill Bit, 3/16 in Dia, 6 in L, (2) 4 in Milled U Flute, 3/16 in Straight Shank, Carbide

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $3.98
Bluegranite HCBG01 Hammer Drill Bit Bluegranite HCBG01 Hammer Drill Bit, 1/8 in Dia, 3 in L, (2) 2 in Milled U Flute, 1/8 in Straight Shank, Carbide, Steel

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $3.81
Bluegranite HCBG02 Hammer Drill Bit Bluegranite HCBG02 Hammer Drill Bit, 5/32 in Dia, 6 in L, (2) 4 in Milled U Flute, Straight Shank Diamond Ground Point

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $3.92
Tapcon 11256 Masonry Drill Bit Tapcon 11256 Masonry Drill Bit, 5/32 in Dia x 3-1/2 in OAL, Climaseal, 2-1/4 in Flute

Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.

Your Price: $4.36
Artu 1041 1-Piece Concrete Screw Drill Bit Artu 1041 1-Piece Multi-Purpose Concrete Screw Drill Bit, 5/16 in Dia x 6 in OAL

Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.

Your Price: $8.62
Bluegranite HCBG22 Hammer Drill Bit Bluegranite HCBG22 Hammer Drill Bit, 3/4 in Dia, 6 in L, (2) 4 in Milled U Flute, 3/8 in Straight Shank, Carbide, Steel

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $18.07
S-B MC06 Multi-Construction Jobber Length Drill S-B MC06 Multi-Construction Jobber Length Drill, 1/4 in Dia, 6 in L 4 in Steep Flute, 1/4 in Softened Shank

Steep flute with ribs for optimal dust removal, softened shank for aggressive griping power and customized carbide geometry optimized to handle a variety of material. Can be used in rotary and impact mode in concrete without bit change; drills into many grades of tiles, from granite to porcelain.

Your Price: $5.22
Irwin 326000 Rotary Percussion Masonry Drill Bit Irwin 326000 Rotary Percussion Masonry Drill Bit, 1/8 in Dia x 3 in OAL

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.

Your Price: $5.23
Bluegranite HCBG24 Hammer Drill Bit Bluegranite HCBG24 Hammer Drill Bit, 7/8 in Dia, 6 in L, (2) 4 in Milled U Flute, 1/2 in Straight Shank, Carbide, Steel

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $20.47
Tapcon 11363 Masonry Drill Bit Tapcon 11363 Masonry Drill Bit, 5/32 in Dia x 5-1/2 in OAL, Climaseal, 3-1/4 in Flute

Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.

Your Price: $5.36
Bluegranite HCBG09 Hammer Drill Bit Bluegranite HCBG09 Hammer Drill Bit, 5/16 in Dia, 6 in L, (2) 4 in Milled U Flute, 5/16 in Straight Shank, Carbide

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $5.52
Tapcon 11248 Masonry Drill Bit Tapcon 11248 Masonry Drill Bit, 3/16 in Dia x 4-1/2 in OAL, Climaseal, 3-1/4 in Flute

Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.

Your Price: $5.45
Artu 1006 1-Piece Concrete Screw Drill Bit Artu 1006 1-Piece Multi-Purpose Concrete Screw Drill Bit, 5/32 in Dia x 3-1/2 in OAL

Made of chrome vanadium steel shank for enormous strength, for use with TAPCON fasteners. Special negative back grinding enables the tip to bore through applications such as masonry, ceramic tile, concrete, brick, fiberglass, Plexiglas, cast metals, hardened steel, granite, marble, woods and plastic with a filing action rather than a cutting action. Requires no center punch, eliminates walking and can be re-sharpened. NOTE: Not recommended for use on mild steel, e.g., aluminum, angle iron, copper, galvanized pipe, brass and stainless steel. Conforms to ANSI standards.

Your Price: $6.06
Tapcon 11257 Masonry Drill Bit Tapcon 11257 Masonry Drill Bit, 3/16 in Dia x 3-1/2 in OAL, Climaseal, 2-1/4 in Flute

Carbide tip used to drill pilot holes when installing anchors or 3/16" Tapcon fasteners. New chisel thread reduces installation torque making it easier to install with fewer head snaps. Climaseal coating provides corrosion resistance.

Your Price: $4.84
Irwin 326005 Rotary Percussion Masonry Drill Bit Irwin 326005 Rotary Percussion Masonry Drill Bit, 1/4 in Dia x 4 in OAL

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.

Your Price: $5.49
Bluegranite HCBG26 Hammer Drill Bit Bluegranite HCBG26T/HCBG26 Hammer Drill Bit, 1 in Dia x 6 in L, 4 in L Milled U Flutes, 1/2 in Straight Shank

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $23.16
Irwin 326015 Rotary Percussion Masonry Drill Bit Irwin 326015 Rotary Percussion Masonry Drill Bit, 1/2 in Dia x 6 in OAL

Bit will fit all hammer drills with 3-jaw or Jacobs chuck and  features a chrome vanadium shaft through hardened to 50-53HrC, shot-peened, double-tempered finish, flute geometry removes dust from the hole quicker, copper braze material gives high heat resistance. All tips made to ANSI specifications.

Your Price: $10.26
Bluegranite HCBG20 Hammer Drill Bit Bluegranite HCBG20 Hammer Drill Bit, 5/8 in Dia, 6 in L, (2) 4 in Milled U Flute, 3/8 in Straight Shank, Carbide, Steel

Bosch BlueGranite Turbo carbide hammer drill bits deliver long life and speed over standard masonry bits, resulting in increased on-the-job productivity. This impact rated bit has been redesigned with a hex shank and is designed for use in today's higher torque hammer drills and impact drivers. The bit features and upgraded four-grind head, delivering additional cutting angles for faster drilling. The multi-grind centering tip also provides for precise starts in masonry, block and concrete. Milled U-flutes with deep cut spirals delivers fast dust removal. Bosch made carbide delivers outstanding durability under heavy loads.

Your Price: $12.24
Dewalt DW5244 Percussion Masonry Drill Bit Dewalt DW5244 Percussion Masonry Drill Bit, 3/4 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $17.62
Dewalt DW5241 Percussion Masonry Drill Bit Dewalt DW5241 Percussion Masonry Drill Bit, 5/8 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $10.67
Dewalt DW5235 Percussion Masonry Drill Bit Dewalt DW5235 Percussion Masonry Drill Bit, 1/2 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $9.94
Dewalt DW5234 Percussion Masonry Drill Bit Dewalt DW5234 Percussion Masonry Drill Bit, 7/16 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $9.11
Dewalt DW5230 Percussion Masonry Drill Bit Dewalt DW5230 Percussion Masonry Drill Bit, 3/8 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $7.00
Dewalt DW5228 Percussion Masonry Drill Bit Dewalt DW5228 Percussion Masonry Drill Bit, 5/16 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $4.63
Dewalt DW5225 Percussion Masonry Drill Bit Dewalt DW5225 Percussion Masonry Drill Bit, 1/4 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $4.23
Dewalt DW5224 Percussion Masonry Drill Bit Dewalt DW5224 Percussion Masonry Drill Bit, 1/4 in Dia x 4 in OAL, 2 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $3.74
Dewalt DW5223 Percussion Masonry Drill Bit Dewalt DW5223 Percussion Masonry Drill Bit, 3/16 in Dia x 6 in OAL, 4 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $4.40
Dewalt DW5222 Percussion Masonry Drill Bit Dewalt DW5222 Percussion Masonry Drill Bit, 3/16 in Dia x 3 in OAL, 2 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $4.11
Dewalt DW5221 Percussion Masonry Drill Bit Dewalt DW5221 Percussion Masonry Drill Bit, 1/8 in Dia x 3 in OAL, 2 in Flute

Rock carbide tip maximizes carbide surface contact for longer bit life; four flutes clean debris out for fast, efficient drilling and three flats on shank eliminate bit slipping in chuck.

Your Price: $3.74
   
 
1 2 3