Home > Shop > HAND TOOLS & TRADESMAN > STRIKING AND CUTTING TOOLS > RIPPING/CHISELING > PUNCHES & DRIFTS
PUNCHES & DRIFTS
Sort By:
1 2
Mintcraft JL-CSL016  Center Punches Mintcraft JL-CSL016 Heavy Duty Center Punch, 5/32 in Tip, 5-1/2 in OAL, Chrome Alloy Steel, Baked Enamel

Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.

Your Price: $3.16
Dasco 606-0 Drift Punch Dasco 606-0 Drift Punch, 1/4 in Tip, 12 in OAL, High Carbon Steel

Made of heat treated high carbon American steel. Features a long, tapered point to aid in aligning and sizing holes in metal and various materials. Strong points and "Targethead" render long service.

Your Price: $9.88
General Tools 70079 Utility Center Punch General Tools 70079 Utility Automatic Center Punch, 0.02 in Tip, 5 in OAL, Aluminum

Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling, one handed operation, no hammer needed.

Your Price: $12.08
Dasco 253-0 Roll Pin Punch Dasco 253-0 Roll Pin Punch, 1/8 in Tip, 4 in OAL, Steel

Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft.

Your Price: $6.13
Dasco 255-0 Roll Pin Punch Dasco 255-0 Roll Pin Punch, 3/16 in Tip, 4-1/2 in OAL, Steel

Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft.

Your Price: $7.32
Dasco 258-0 Roll Pin Punch Dasco 258-0 Roll Pin Punch, 5/16 in Tip, 6 in OAL, Steel

Made of heat treated high carbon American steel. Machined specifically for removing spring or roll pins; made with a hardened point, long shaft.

Your Price: $8.12
Dasco 541-0 Prick Punch Dasco 541-0 Prick Punch, 3/8 in Tip, 5 in OAL, High Carbon Steel

Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.

Your Price: $4.40
Dasco 581-0 Pin Punch Dasco 581-0 Pin Punch, 3/32 in Tip, 5-1/2 in OAL, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $4.70
Dasco 582-0 Pin Punch Dasco 582-0 Pin Punch, 1/8 in Tip, 5-1/2 in OAL, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $4.70
Dasco 564-0 Solid Punch Dasco 564-0 Solid Punch, 1/8 in Tip, 5-1/2 in OAL, High Carbon Steel

Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.

Your Price: $6.13
Dasco 565-0 Solid Punch Dasco 565-0 Solid Punch, 5/32 in Tip, 5-1/2 in OAL, High Carbon Steel

Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.

Your Price: $6.13
Dasco 566-0 Solid Punch Dasco 566-0 Solid Punch, 3/16 in Tip, 7 in OAL, High Carbon Steel

Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.

Your Price: $6.13
Dasco 568-0 Solid Punch Dasco 568-0 Solid Punch, 7/16 in Tip, 9 in OAL, High Carbon Steel

Made from heat treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.

Your Price: $6.90
Dasco 583-0 Pin Punch Dasco 583-0 Pin Punch, 5/32 in Tip, 5-1/2 in OAL, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $4.92
Dasco 584-0 Pin Punch Dasco 584-0 Pin Punch, 3/16 in Tip, 5-1/2 in OAL, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $4.92
Dasco 589-0 Pin Punch Dasco 589-0 Pin Punch, 1/4 in Tip, 6 in OAL, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $5.68
Dasco 590-0 Pin Punch Dasco 590-0 Pin Punch, 5/16 in Tip, 6 in L, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $5.84
Dasco 592-0 Pin Punch Dasco 592-0 Pin Punch, 1/16 in Tip, 4-1/2 in OAL, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $4.36
Dasco 530-0 Center Punch Dasco 530-0 Center Punch, 1/4 in Tip, 4 in OAL, High Carbon Steel

Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.

Your Price: $3.70
Dasco 531-0 Center Punch Dasco 531-0 Center Punch, 5/16 in Tip, 4-1/2 in OAL, High Carbon Steel

Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.

Your Price: $3.98
Dasco 532-0 Center Punch Dasco 532-0 Center Punch, 7/16 in Tip, 5 in L, High Carbon Steel

Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.

Your Price: $4.76
Dasco 534-0 Center Punch Dasco 534-0 Center Punch, 1/2 in Tip, 5-1/2 in L, High Carbon Steel

Made of heat treated high carbon American steel. Features precision ground point for marking accurate hole starting easier. Use on metals softer than their point.

Your Price: $5.44
Dasco 539-0 Prick Punch Dasco 539-0 Prick Punch, 1/4 in Tip, 4 in OAL, High Carbon Steel

Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.

Your Price: $3.80
Dasco 588-0 Pin Punch Dasco 588-0 Pin Punch, 7/32 in Tip, 6 in OAL, High Carbon Steel

Machined to exacting standards from heat treated, high carbon American steel. Has a wide variety of uses in driving and removing such things as pins and keys; after initial removal by a machine punch or starter. Use a pin punch one size smaller than the pin being driven to prevent damage to the side walls containing the pin.

Your Price: $5.38
Dasco 540-0 Prick Punch Dasco 540-0 Prick Punch, 5/16 in Tip, 4-1/2 in OAL, High Carbon Steel

Made of heat treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp polished points aid in accuracy. Use on metals softer than their points.

Your Price: $3.92
General Tools 806 Jiffy Self-Center Punch General Tools 806 Jiffy Self-Center Punch, 3/8 in Tip, 2-1/2 in OAL, Steel, Plated

Hardened steel pin, knurled body provides no slip grip, auto centering, and countersunk end. Used for creating starter screw holes.

Your Price: $5.04
Mintcraft JL-CSL0143L  Center Punches Mintcraft JL-CSL0143L Heavy Duty Center Punch, 5/64 in Tip, 4-1/2 in OAL, Chrome Alloy Steel, Baked Enamel

Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.

Your Price: $2.91
Mintcraft JL-CSL0173L  Center Punches Mintcraft JL-CSL0173L Heavy Duty Center Punch, 1/4 in Tip, 6 in OAL, Chrome Alloy Steel, Baked Enamel

Made from drop forged, heat treated chrome alloy steel material with baked enamel finish and heavy duty hex shank.

Your Price: $3.88
General Tools 79 Center Punch General Tools 79 Automatic Heavy Duty Center Punch, 1/2 in Tip, 4-7/8 in OAL, Steel, Black Oxide

Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-walled tubing. One-handed operation, no hammer needed. Spring tension impact adjustments for working with lighter materials. Black oxide finish to prevent rust. Used for punching, marking and staking and hardened steel point is replaceable.

Your Price: $22.81
General Tools 87 Center Punch General Tools 87 Automatic Center Punch With Pocket Clip, 5/16 in Tip, 5-3/4 in OAL, Aluminum

Provides accurate center punches without drill bit traveling, one handed operation, no hammer needed; spring tension impact adjustments for working with lighter materials, replaceable hardened steel point, and black oxide finish preventing rust.

Your Price: $15.56
   
 
1 2